• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.1
• /
• pp.270-278
• /
• 2005

Alopecia is an increasing disease recently. Alopecia has social and psychological influence on the alopecia patients. But there is no perfect treatment of alopecia. Authors performed clinical study to evaluate the therapeutic effects of herbal soap Sangmogen in patients with alopecia. Twenty patients with alopecia were included in this study. The patients shampooed with herbal soap Sangmogen everyday. Efficacy was determined by investigating counts of hair, terminal hair, vellus hair, hair follicle, hair pull test, erythema, scale and fissure. After a experiment, self-assessment was checked. As the result of the study, we found that a significant effect was observed. So we concluded that herbal soap Sangmogen has a clinical effect on the alopecia.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.117-122
• /
• 2001

Recently, epoxy-coated re-bar used to the structure partly and put to practical use step, but not economical and appeared to the defect of deterioration of long term bond strength between concrete. The method for complement the defect of epoxy coated re-bar, study of polymer cement slurry coated re-bar started and basic properties appeared to excellent, but study of bond properties embedded in concrete specimens insufficient until now. This study attempts to examination of using possibility for bond strength of polymer cement slurry coated re-bar between concrete specimens compare to ACI Code and KS Code through pull-out test of 15cm$\times$15cm$\times$15cm specimens with polymer cement slurry coated re-bar as polymer cement ratio 50%, 100%, 150%, coating thickness 250${\mu}{\textrm}{m}$, 440${\mu}{\textrm}{m}$ and curing age. In the results of this study, the bond strength of polymer cement slurry coated re-bar compare to plain re-bar, epoxy coated re-bar decreased St/BA-modified polymer cement slurry coated re-bar, but bond strength of PA-modified polymer cement slurry coated re-bar appeared to excellent results. The bond properties of polymer cement slurry coated re-bar between concrete will be obtain more precise results according to compressive strength change of concrete and re-bar diameter size.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.5
• /
• pp.854-864
• /
• 1997

This study was initiated to develop a uniform design suitable for child inpatients. The experimental hospital inpatient uniform design was developed based on the results of the prior studies. The panel was composed of 5 experienced nurses and 5 clothing specialists. They evaluated the function of the experimental inpatient uniforms developed in this study. The experimental hospital gown design was reformed based on the panel's evaluation.1'hen the child inpatients performed the wear test for the reformed experimental hospital gown. The results of the study are as follows; 1. The child inpatient hospital gown design of the most hospitals were similar to the adult patient's uniform : the V-neckline shirts with full length set-in sleeves. The bottom was full length pull-on pants. The fabric was white cotton with blue hospital logo and stripe print in most cases. 2. The panel's specialty affected the evaluation of the uniform design. The nurses concerned about the durability after washing and ease for medical treatment. The clothing specialists cared about the features related to the clothing construction and ease for physical movement of body. 3. The most preferred hospital inpatient uniform design by the panels was the shirts or one- piece gown with three-quarter length sleeve and overarm seam opening. 4. The researchers developed one-piece dress gown for the children under two years old. Three different size pajamas were developed for children 2∼5 years old,5∼8 years and 8∼12 years old.

• Asian Oncology Nursing
• /
• v.9 no.2
• /
• pp.145-154
• /
• 2009

Purpose: The purpose of this study was to obtain information about the experiences of sensations after breast cancer surgery characterized by prevalence, frequency, and severity, distresses, and disturbances in ADL using the BSAS (Breast Sensation Assessment Scale) and to develop the standardized Korean BSAS. Methods: Thirty two women from 3 to 100 days after breast cancer surgery (BCS) completed Roberta's BSAS. The 18 sensations of BSAS were translated using the references of Lee's Korean Pain Rating Scale and English-English, English-Korean dictionaries and the consultation from two native Americans, one bilingual permanent resident of the States, and one nursing professor. The Korean-translated BSAS has high reliability in test-retest. Likert type 4-point scale and 100 mm VAS were used for assessment. Results: Certain sensations remained prevalent (tender, pull, pain), frequent (numb, nag, throb), severe (throb, shoot, numb), causing distress (throb, penetrate, shoot), and influencing on ADL (throb, penetrate, nag). The most frequently experienced sensation other than BSAS was itching. There was little difference in the prevalence of symptom experiences between sentinel lymph node biopsy and axillary lymph node dissection. Conclusion: The women after BCS are suffering from neuropathic sensations. The Korean- translated BSAS could be used in effectively assessing breast sensations after BCS in Korean women.

• Computers and Concrete
• /
• v.26 no.3
• /
• pp.257-273
• /
• 2020

Concrete bond strength with steel re-bars depends on multiple factors including concrete-steel interface and mechanical properties of concrete. However, the hydration development of cementitious paste, and in turn the mechanical properties of concrete, are negatively affected by cold weather. This study aimed at exploring the concrete-steel bonding behavior in concrete cast and cured under freezing temperatures. Three concrete mixtures were cast and cured at -10 and -20℃. The mixtures were protected using conventional insulation blankets and a hybrid system consisting of insulation blankets and phase change materials. The mixtures comprised General Use cement, fly ash (20%), nano-silica (6%) and calcium nitrate-nitrite as a cold weather admixture system. The mixtures were tested in terms of internal temperature, compressive, tensile strengths, and modulus of elasticity. In addition, the bond strength between concrete and steel re-bars were evaluated by a pull-out test, while the quality of the interface between concrete and steel was assessed by thermal and microscopy studies. In addition, the internal heat evolution and force-slip relationship were modeled based on energy conservation and stress-strain relationships, respectively using three-dimensional (3D) finite-element software. The results showed the reliability of the proposed models to accurately predict concrete heat evolution as well as bond strength relative to experimental data. The hybrid protection system and nano-modified concrete mixtures produced good quality concrete-steel interface with adequate bond strength, without need for heating operations before casting and during curing under freezing temperatures down to -20℃.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1110-1116
• /
• 1993

A study on optimum operation performances of power efficiency, economy and exhaust emissions for a tractor was conducted. A mathematical model of multiple degree polynomial equation was applied to established the function of solid multiple parameter curves for specific fuel consumption (ge), cabon monoxide (CO) ,hydrcarbons (HC) and cabonaceous smoke (Rb). The optimum operation theorems for economy operation indicated by ge and for exhaust emissions described by Co , HC and Rb were obtained from analytical method and performance test data. The optimum operation theorems could exhibit optimum operation working points, curves, and regions. The optimum matching relations of engine speed and transmission parameters were analyzed by using computer simulation methods in accordance with the tractor specifications , actual farm working conditions in a typical drawbar pull work such as plowing , the optimum operation objective function, the ideal transmission ratio, practical gear shif ing positions and practical travel speed of the tractor TN55 medel. The results of the anlayzes indicated clearly that the optimum power efficient operation, energy saving and pollution reducing would be realized if the tractor would be operated according to theoptimum operation methods.

• Journal of Biosystems Engineering
• /
• v.17 no.3
• /
• pp.237-246
• /
• 1992

This study was conducted to investigate experimentally the effect of track tension on the tractive performance of rice combine. The experiment was carried out at the two in-door soil bins with soil types of loam and sandy loam. The initial track tension was varied by three different values of 0.71, 1.75 and 3.84kN at three different forward velocity settings of 0.17, 0.32 and 0.45m/s, respectively. The data acquisition system was designed and used for the measurement of pull, driving axle torque and its velocity under the test conditions to calculate the tractive efficiency. Results of the study were summarized as follows : 1) The effect of the initial track tension on the tractive efficiency was found being significantly dependent on soil types but not on forward velocities. Therefore, the benifit of adjusting the initial track tension may be obtained when the types of soils on which combines operate are changed. 2) In loam, tractive efficiency decreased with increase in track tension. However, it increased in sandy loam until it reached to a peak value and then decreased with increase in track tension. 3) The maximum tractive efficiency of the tested combine was obtained with an initial track tension of about 1.75kN on sandy loam, and below that on loam at about 5% slippage without being noticeably influenced by the forward velocity.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.171-178
• /
• 2008

This paper is concerned with the development of a measurement system using field measuring device which will give the membrane stress of the membrane structures. Up to this point, several techniques on measurement of membrane stresses has been proposed and some have been used in the fields, but accuracy of the measured stresses to be far from reliable one. Such situation has not been changed until recent days, we do not have the measurement device on which we can depend. On top of that, due to the different properties in cross directions for material of the membrane, the stress in the warp direction is different from that in the fill one. A new method is proposed to measured membrane stresses in two different direction separately, where instead of membrane stresses directly, an external force perpendicular to the membrane to be applied. A portable device can measure the applied force and the displacement. A special testing bed to be fabricated to accommodate $50cm{\times}50$ manbrane specimen which can apply 5 ton load in two orthogonal direction. A special device using push-pull gage was developed. To measure the membrane stresses in warp and fill direction separately, a different length of the tips are used. The measuring device which can called tension meter, can be calibrated on the testing bed, and optimized the length and shape of tip.

• Journal of Mechanical Science and Technology
• /
• v.20 no.7
• /
• pp.1030-1042
• /
• 2006

An experimental study has been performed to investigate the off-take phenomena at the header-feeder systems (horizontal header pipe with multiple feeder branch pipes) in a CANDU (CANadian Deuterium Uranium) reactor with the branch orientation varies ${\pm}36^{\circ}\;or\;{\pm}72^{\circ}$. In order to evaluate the applicability of the conventional correlations used in the safety analysis code, RELAP5-Mod3, the test facility is designed with the 1/2 scale of the. CANDU 6. It was found that the data set for the top, bottom and side branches are in a good agreement with the correlations used. However, for the specific angled branches, ${\pm}36^{\circ}\;and\;{\pm}72^{\circ}$, the onsets of off-take data and quality data showed large deviation with the conventional model inside RELAP5-MOD3. Furthermore, based on the uncertainty analysis, the conventional 2.5 power law needs to be modified. The present experimental data set can be useful for the construction of the general correlation considering the arbitrary branch orientation.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.1
• /
• pp.30-36
• /
• 2005

This study is to investigate a damage estimation of single edge notched tensile specimens as a function of acoustic emission(AE) according to the uni-directionally oriented carbon fiber/epoxy composites, CFRP In fiber reinforced composite materials, AE signals due to several types of failure mechanisms are typically observed. These are due to fiber breakage, fiber pull-out matrix cracking, delamination, and splitting or fiber bundle breaking. And these are usually discriminated on the basis of amplitude distribution, event counts, and energy related parameters. In this case, AE signals were analyzed and classified 3 regions by AE event counts, energy and amplitude for corresponding applied load. Bath-tub curve shows 3 distinct periods during the lifetime of a single-edge-notch(SEN) specimen. The characterization of AE generated from CFRP during SEN tensile test is becoming an useful tool f3r the prediction of damage failure or/and failure mode analysis.