• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.9
• /
• pp.3639-3644
• /
• 2015

Oral, cervical and breast cancers, which are either preventable and/or amenable to early detection and treatment, are the leading causes of cancer-related morbidity and mortality in India. In this paper, we describe implementation science research priorities to catalyze the prevention and control of these cancers in India. Research priorities were organized using a framework based on the implementation science literature and the World Health Organization's definition of health systems. They addressed both community-level as well as health systems-level issues. Community-level or "pull" priorities included the need to identify effective strategies to raise public awareness and understanding of cancer prevention, monitor knowledge levels, and address fear and stigma. Health systems-level or "push" and "infrastructure" priorities included dissemination of evidence-based practices, testing of point-of-care technologies for screening and diagnosis, identification of appropriate service delivery and financing models, and assessment of strategies to enhance the health workforce. Given the extent of available evidence, it is critical that cancer prevention and treatment efforts in India are accelerated. Implementation science research can generate critical insights and evidence to inform this acceleration.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.6
• /
• pp.367-375
• /
• 2003

The aim of this study was to investigate the soil physical properties and the traction characteristics of paddy field before tillage by a computer simulation. Soil physical properties, such as soil moisture content, bulk density, soil hardness, and soil texture were measured in the twelve rice production area. Mathematical model based on dimensional analysis which include soil physical properties and vehicle factors was used for the computer simulation. Most of the soil texture of the investigated area was silty loam, loam and silty clay loam. Soil moisture content ranged between 20 and 40% mostly. Soil bulk density was in the range of 1,500 to $1,700kg\;m^{-3}$. Soil hardness ranged between 2 to $12kg\;cm^{-2}$ mostly. Soil hardness incorporates the effects of many soil physical properties such as moisture content, texture and bulk density, and so the range of soil hardness was greater than that of any other physical properties. The predicted net traction was in the range of 70 to 1,500 kgf depending on the area, but it was above 1,000 kgf for most of the investigated area. Thus it was concluded that 50 HP tractor can pull the four row moldboard plow considering the conventional tillage depth and width. But for the soft soil area such as Andong and Namyang, tractor itself may have mobility problem and show high slip during plowing operation.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.13-29
• /
• 2001

A mathematical model was proposed to analyze the vibration of diaphragm, such as the contact lenses fitted on the eyes, being subjected to the external sinusoidal pressure. The model incorporates the differential equations and their numerical solution program, based on the wave equations. Turbo-C and graphic software, formulated to describe the dependence of the various parameters involved in the vibration. The model predicts the radial distribution of amplitude, frequency dependence of both average displacement amplitude and the power of diaphragm whose edge is being either simply supported or rigidly clamped in vibration. The effect of variables such as thickness, radius, damping coefficients on the vibration characteristics was illustrated by the computer simulation of the derived program. As the frequency of driving pressure increases above the certain value determined by the boundary conditions and parameters the wave shape or pattern changes from simple arc to belly or loops having double antinode. It seems that the effect of outer antinode progressively increases as the frequency increases. If this kind of phenomena occurs to the contact lens on the cornea in vivo, it may cause an abnormal correction power in the lenses or pull off the eye due the increased rise of outer part of the lens.

• Journal of IKEEE
• /
• v.14 no.2
• /
• pp.51-57
• /
• 2010

A CMOS rail-to-rail high voltage buffer amplifier is proposed to drive the gamma correction reference voltage of large TFT LCD panels. It is operating by a single supply and only shows current consumption of 0.5mA at 18V power supply voltage. The circuit is designed to drive the gamma correction voltage of 8-bit or 10-bit high resolution TFT LCD panels. The buffer has high slew rate, 0.5mA static current and 1k$\Omega$ resistive and capacitive load driving capability. Also, it offers wide supply range, offset voltages below 50mV at 5mA constant output current, and below 2.5mV input referred offset voltage. To achieve wide-swing input and output dynamic range, current mirrored n-channel differential amplifier, p-channel differential amplifier, a class-AB push-pull output stage and a input level detector using hysteresis comparator are applied. The proposed circuit is realized in a high voltage 0.18um 18V CMOS process technology for display driver IC. The circuit operates at supply voltages from 8V to 18V.

• Journal of Welding and Joining
• /
• v.29 no.6
• /
• pp.56-64
• /
• 2011

Friction stir spot welding between 5454 aluminum alloy sheets with the different thicknesses of 1.4 and 1.0 mm was performed. In the welding process, the tool for welding was rotated ranging from 500 to 2500, and plunged to the depth of 1.8 mm under a constant tool plunge speed of 100 mm/min. And then, the rotating tool was maintained at the plunge depth during the dwell time ranging from 0 to 7 sec. The pull-out speed of the rotating tool was 100 mm/min. The increase of tool rotation speed resulted in the change of the macrostructure of friction-stir-spot-welded zone, especially the geometry of welding interface. The results of the tensile shear test showed that the total displacement and toughness of the welds were increased with the increase of the tool rotation speed, although the maximum tensile shear load was decreased. However, the change in the dwell time at the plunge depth of the tool did not produce the remarkable variation in the macrostructure and mechanical properties of the welds. In all cases, the average hardness in friction-stir-spot-welded zone was higher than that of the base metal zone. By the friction stir spot welding technique, the welds with the excellent mechanical properties than the mechanically-clinched joints could be obtained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.745-752
• /
• 2016

In the era of the Internet of Things, where all physical objects are connected to the Internet, we suggest a remote control system using a Raspberry Pi single-board computer with ZigBee, which can turn an indoor light-emitting diode (LED) and a multiple-tap on and off, and with a smart phone can control the brightness of the LED as well as an electronic door lock. By connecting an infrared (IR) transmitter module to the Raspberry Pi, we can control home appliances, such as an air conditioner, and we can also monitor indoor images, indoor temperatures, and illumination by using a smart phone app. We developed a method of finding out IR transmission codes required for remote-controllable appliances with an AVR micro-controller. We suggest a method to remotely open and shut an office door by novating the door lock. The brightness level of an LED (between 0 and 10) can be controlled through a PWM signal generated by an ATmega88 microcontroller. A mutiple-tap is controlled using an ATmega32, a photo-coupler, and a TRIAC. The signals for measured temperature and illumination are converted from analog to digital by using the ATtiny44A microcontroller transmitting to a Raspberry Pi through SPI communication. Then, we connect a camera to the CSI head of the Raspberry Pi. We can turn on the smart multiple-tap for a certain period of time, or we can schedule the multi-tap to turn on at a specific time. To reduce standby power, people usually pull out a power code from multiple-taps or turn off a switch. Our method helps people do the same thing with a smart phone, if they are away from home.

• Geophysics and Geophysical Exploration
• /
• v.22 no.1
• /
• pp.21-28
• /
• 2019

We perform a 3D tomographic inversion using surface wave dispersion curves to obtain S-velocity model and radial anisotropy beneath Saudi Arabia. The Arabian Peninsula is geologically and topographically divided into a shield and a platform. We used event data with magnitudes larger than 5.5 and epicentral distances shorter than $40^{\circ}$ during 2008 ~ 2014 from the Saudi Geological Survey. We obtained dispersion curves by using the multiple filtering technique after preprocessing the event data. We constructed SH- and SV-velocity models and consequently radial anisotropy model at 10 ~ 60 km depths by inverting Love and Rayleigh group velocity dispersion curves with period ranges of 5 ~ 140 s, respectively. We observe high-velocity anomalies beneath the Arabian shield at 10 ~ 30 km depths and low-velocity anomalies beneath the Arabian platform at 10 km depth in the SV-velocity model. This discrepancy may be caused by the difference between the Arabian shield and the Arabian platform, that is, the Arabian shield was formed in Proterozoic thereby old and cold, while the Arabian platform is covered by predominant Paleozoic, Mesozoic, and Cenozoic sedimentary layers. Also we obtained radial anisotropy by estimating the differences between SH- and SV-velocity models. Positive anisotropy is observed, which may be generated by lateral tension due to the slab pull of subducting slabs along the Zagros belt.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.3
• /
• pp.201-207
• /
• 2019

In this study, the direct tensile properties of amorphous metallic fiber-reinforced cement based composites according to the strain was evaluated. A thin plate-shape amorphous metallic fiber with 15mm and 30mm in length was used. And fiber-reinforced cement based composites were prepared with contents of 1.0, 1.5, 2.0%. The direct tensile test was conducted under the conditions of $10^{-6}/s(static)$ and $10^1/s(dynamic)$ strain rate. As a results, amorphous metallic fiber with a length of 15mm was observed in pull-out behavior from the cement matrix because of the short fiber length and large portion of mixed fiber. On the other hand, amorphous metallic fiber with a length of 30mm were not pulled out from matrix because the bonding force between the fiber and matrix was large due to rough surface and large specific surface area. However, fracture occurred because thin plate shape fibers were vulnerable to shear force. Tensile strength, strain capacity and toughness were improved due to the increase in the fiber length. The dynamic increase factor of L15 was larger that of L30 because the bonding performance of the fiber-matrix interface is significantly affected by the strain rate.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.2
• /
• pp.67-79
• /
• 2023

The bounce rate is the rate at which a user leaves immediately after visiting, and this study aimed to find out what attributes of a website affect the bounce rate. Web site evaluation items were defined as a total of 4 items and 27 evaluation attributes, including usability, information, service interaction, and technology, so that they can be commonly applied to venture companies in various industries through prior research. As a result of the study, 6 website attributes that affect the bounce rate were verified to be significant by discriminant analysis and decision tree analysis. Suggestions to reduce the bounce rate of venture business websites through this study are as follows. First, the path name of the website is displayed as mandatory and a pull-down menu function is added to facilitate movement to other pages. Second, it is good to expose core content that can attract users' attention in the form of a banner, and place internal link banners in the right place on sub-pages. Third, external links should be linked to a new window so that they do not leave the current page immediately so that they can be re-entered. Lastly, it is recommended to expose the contact information of the person in charge and consultation function as direct information for communication with customers, but if individual response is difficult, at least the consultation function must be added. These suggestions are expected to be of practical help in various fields such as website development, operation, and marketing. However, in special cases, a high bounce rate may be normal, so it should be considered according to the situation.

• Journal of Life Science
• /
• v.16 no.4
• /
• pp.612-617
• /
• 2006

Phosphoinositide-specific phospholipase $C-{\gamma}\;1\; (PLC-{\gamma}\;1)$ has pivotal roles in cellular signaling by producing second messengers, inositol 1,4,5-trisphosphate $(IP_3)$ and diacylglycerol (DG). Tubulin is a main component of microtubules and mitotic spindle fibers, which are composed of ${\alpha}-$ and ${\beta}-tubulin$ heterodimers in all eukaryotic cells. In humans, six ${\beta}-tubulin$ isotypes have been identified which display a distinct pattern of tissue expression. Previously we found that $PLC-{\gamma}\;1$ and one of four ${\beta}-tubulin$ isotypes including ${\beta}1$, ${\beta}2$, ${\beta}3$ and ${\beta}6$, colocalized in COS-7 cells and cotranslocated to the plasma membrane to activate $PLC-{\gamma}\;1$ upon agonist stimulation. In the present study, we demonstrate that the remaining two, tubulin ${\beta}4$ and ${\beta}5$, also showed a potential to activate $PLC-{\gamma}\;1$. The phosphatidylinositol 4,5-bisphosphate $(PIP_2)$ hydrolyzing activity of $PLC-{\gamma}\;1$ was substantially increased in the presence of purified ${\beta}4$ and ${\beta}5$ tubulin in vitro, whereas the activity was not promoted by bovine serum albumin, suggesting that tubulin ${\beta}4$ and ${\beta}5$ also activate $PLC-{\gamma}\;1$. Taken together, our results suggest that all the ${\beta}-tubulin$ isotype activates $PLC-{\gamma}\;1$ activity to regulate cellular signaling.