• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.5
• /
• pp.1-12
• /
• 2014

Recently, the reenaction of place's memories that were considered sense of place based on its historical and structural characteristic were assumed important topics for recovering and making the park from industrial sites, such as factory, industrial complex, industrial city, labor residential development, landfill, etc., to the public all over the world. This research aimed to conduct some preliminary data for making the park's sense of place highly. So, after conducting the structural forms of sense of place for Seoul Forest and Seonyudo Park that were designed and built by considering its place memories actively, park planning and design implications that were considered its sense of place were suggested. The research results those were derived from the structural forms of sense of place for Seoul Forest and Seonyudo Park's are the following. First, the Structural Equation Modeling(SEM) on Seoul Forest and Seonyudo Park were determined that the natural-physical, artificial-physical, and experiential environmental factors' satisfaction of Seoul Forest and Seonyudo Park have an effect on forming the Sense of Place. In addition, the sense of place was affected by the willingness to visit. Second, according to its physical environment, the experiential factors, such as plays, exercises and etc., were more important relatively. Therefore, experiential factors should be considered significantly with physical factors to make the sense of place highly. Third, even the places were under similar category, the factors' and valuables' relative importance were changed. As the results of structural equation modeling said, specific valuables' related with each factors would be differentiated due to the places' characteristics. For example, the results were showed that natural-physical factor was more important than artificial-physical factor in Seoul Forest. On the other hand, artificial-physical factor was more important than the natural- physical factor. This research carries some significance for applying a quantitative research method(structural equation modeling) to various place to conduct the sense of place's structural model, for suggesting relative specific methods to make the sense of place, and for being a step forward to substance of sense of place. If further studies conduct focusing on various places to draw the forming models of sense of place that were based this research's analysis methods and results, those researches would contribute to make the urban place meaningful, characteristically and affectionately. Furthermore, those researches would contribute in making a humane and competitiveness city.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.58-68
• /
• 2014

Christian Cay Lorenz Hirschfeld is often regarded as 'a father of landscape garden art.' He was an aesthetics professor and garden theoretician in the $18^{th}$ century. He put forth the most comprehensive garden theory book in five volumes between 1779 and 1785. His book, Theorie der Gartenkunst, was translated and widely circulated in his contemporary. The book, which dealt with diverse aspects of garden art such as history, design, material, and type, urged to promote the prevalence of landscape garden in European continents as well as in Germany. However, there have scarcely been discourses in the Hirschfeld's garden theory. This essay aims to review Hirschfeld's garden thoughts in his book critically and to reinterpret some issues in the contemporary landscape theory and practice. Hirschfeldian theory was the product of $18^{th}$ century German Enlightenment and romanticism. At that time, Nature was regarded as divine realm. There was a German affinity with natural world. The spread of reading culture and the fashion of travel literature were another background of the success of his garden literature. Several issues in Hirschfeld garden theory will discussed here. First, privileging garden art was the most significant contribution in his theory. He emphasized that garden art was the most advanced art form among all art genres. Second, garden art was grounded on the mimesis of nature. The ambiguous relationship between nature and art still existed in garden making. However, garden art can be flourished when utilizing the potency of nature in itself. Third, there was the association between the image and the idea in experiencing the garden. Some garden scenes stimulated the related emotional responses such as cheerful and merry, softly melancholic, romantic, solemn etc. Fourth, the movement was the essential aspect of garden art. Motion and emotion are come together in garden experience. To represent the landscape garden style in suitable way, the sketch or image seems to be preferable than the plans and views. Finally, garden art was composing of not only the physical space but also the spirit of place. He maintained the garden art as hortus moralis should be a social metaphor. Hirschfeldian garden theory has often been criticized as the lack of practical power and the old fashioned idea. However, his theory influenced on formulating the idea of public park in $19^{th}$ century. Moreover, there are still some visionary aspects of his theory such as the reevaluation of garden art, the emphasis of locality and the introduction of Mittelweg idea. Recently, gardening culture are prevalent in various realms of art and life. Hirschfeld's garden theory as humanistic landscape theory can provide us some insights in the contemporary practices.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.3
• /
• pp.464-471
• /
• 2002

Author applied several engineering methodologies to classical ultrasonic nebulizer to cope with it's demerits. After several trials and errors, we got the several meaningful results. To evaluate the modified ultrasonic nebulizer for inhalation toxicology of cadmium, author used light-scattering photometer. This paper is the one part of inhalation exposure systems for inhalation toxicology study of cadmium. According to the testing conditions, source temperature 50℃ and inlet-duct band temperature 150℃, aerosol generation results for sodium chloride and cadmium chloride were as followings: Coefficients of variation(CV) of sodium chloride and cadmium chloride for repeated trials were 3.38 and 4.77 for 10g, 2.47 and 5.02 for 5g, and 4.70 and 2.98 for 2.5g. All the CVs were within 10% of acceptance variability. Count Per Minute(CPM) changes of NaCl and CdCl₂ for 5 repeated trials were similar. CPM ratios of CdCl₂/NaCl were 1.13 for 10g, 0.76 for 5g, and 1.06 for 2.5g. Relative aerosol generation of cadmium chloride to sodium chloride was the highest in 10g. Efficiency increases of 24.50% for 5g NaCl, 14.91 % for 2.5g NaCl, and 16.48% for 2.5g CdCl₂ with respect to theoretical efficiency were observed but 0.04% efficiency decrease was observed in 5g CdC₂. According to the modifications of source temperature(20, 50, 70℃) and inlet-duct band temperature(20, 50, 100, 150, 200℃), aerosol generation results for NaCl and CdCl₂ were as followings: CPM trends for each quantity excepting 10g NaCl in inlet-duct band temperature 200℃ were similar, and the highest CPM was observed in source temperature 70℃ to each inlet-duct band temperature. The highest CPMs to 10, 5, and 2.5g NaCl were observed in source temperature 70℃ and inlet-duct band temperature 20℃. Aerosol generation of cadmium chloride was increased with the higher source temperature, excepting inlet-duct band temperature 200℃. The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this trend was similar to NaCl aerosol generation The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this result was similar to NaCl aerosol generation. Observed efficiencies of 5 and 2.5g NaCl were similar to ifs theoretical efficiency but -3.08% efficiency decrease of 5g CdCl₂, 17.47% efficiency increase of 2.5g CdCl₂ were observed. CPM ratio of CdCl₂/NaCl of 10g was different to 5 and 2.5g, and 2.5g ratio was higher than 5g ratio. In conclusion, to get maximum aerosol generation for NaCl and CdCl₂ will be the conditions that set the appropriate inlet-duct band temperature for each materials and increase the source temperature. Sodium chloride can be used to evaluate the performance and predict the concentration for cadmium aerosol in aerosol generator and inhalation exposure system.

• Economic and Environmental Geology
• /
• v.51 no.4
• /
• pp.381-392
• /
• 2018

This study examines strategies and implementation plans for commercializing $CO_2$ capture and storage, which is an effective method to achieve the national goal of reducing greenhouse gas. In order to secure cost-efficient business model of $CO_2$ capture and storage, we propose four key strategies, including 1) urgent need to select a large-scale storage site and to estimate realistic storage capacity, 2) minimization of source-to-sink distance, 3) cost-effectiveness through technology innovation, and 4) policy implementation to secure public interest and to encourage private sector participation. Based on these strategies, the implementation plans must be designed for enabling $CO_2$ capture and storage to be commercialized until 2030. It is desirable to make those plans in which large-scale demonstration and subsequent commercial projects share a single storage site. In addition, the plans must be able to deliver step-wised targets and assessment processes to decide if the project will move to the next stage or not. The main target of stage 1 (2019 ~ 2021) is that the large-scale storage site will be selected and post-combustion capture technology will be upgraded and commercialized. The site selection, which is prerequisite to forward to the next stage, will be made through exploratory drilling and investigation for candidate sites. The commercial-scale applicability of the capture technology must be ensured at this stage. Stage 2 (2022 ~ 2025) aims design and construction of facility and infrastructure for successful large-scale demonstration (million tons of $CO_2$ per year), i.e., large-scale $CO_2$ capture, transportation, and storage. Based on the achievement of the demonstration project and the maturity of carbon market at the end of stage 2, it is necessary to decide whether to enter commercialization of $CO_2$ capture and storage. If the commercialization project is decided, it will be possible to capture and storage 4 million tons of $CO_2$ per year by the private sector in stage 3 (2026 ~ 2030). The existing facility, infrastructure, and capture plant will be upgraded and supplemented, which allows the commercialization project to be cost-effective.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.3
• /
• pp.159-168
• /
• 2005

This experiment was carried out during the period from May to October 1998 to determine the effect of fermented sawdust swine manure application (SSM) on the herbage production of Japanese millet and soil properties in the Cheju brown volcanic ash soil. The randomized block design (T1 : basic chemical fertilizer, N 200 kg/ha + $P_2O_5\;300 kg/ha+K_2O$ 200kg/ha ; T2 : 1/2 basic chemical fertilizer, N $100+P_2O_5\;150+K_2O$ 100kg/ha; T3 : 1/2 basic SSM, N 100kg/ha, T4:basic SSM, N 200kg/ha; T5:2 times basic SSM, N 400 kg/ha ; T6:4 times basic SSM, N 800 kg/ha) was used. At the same application level of nitrogen 200kg/ha, the application of $100\%$ chemical fertilizer (T1) had significantly lower dry matter yield than that of $50\%$ chemical fertilizer and $50\%$ SSM (T2) or $100\%$ SSM (T4)(p<0.01). Dry matter yield increased with an increase of SSM application to N 400kg/ha level but decreased at N 800 kg/ha level. P, K and Ca contents of Japanese millet tended towards to decrease with an increase of SSM level. The application of chemical fertilizer lowered P and K content of Japanese millet in comparison with that of SSM (p<0.05). pH, available phosphorus. exchangeable potassium, Ca and Mg content of soil studied showed a significant increase with an increase of SSM application level (p<0.05). However, at the same application level of N 200kg/ha, there was statistically no significant difference between chemical fertilizer and SSM in those contents of soil after experiment. The bacterial number of soil among microbial population increased with an increase of SSM level, in June, 1998 (p<0.05), but there was no regular tendency, in October. The rate of bacteria to fungus in soil had a tendency to decrease with an increase of SSM level. In conclusion, it is recommended to use N 400kg/ha of SSM or N 100 kg/ha of chemical fertilizer+N 100 kg/ha of SSM for Japanese millet.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.4
• /
• pp.233-246
• /
• 2001

The purpose of this study was to suggest the possibility of utilizing the wildflower pasture for promoting public interest. Growth characteristics, botanical composition, fauna distribution on wildflower pastures were observed. The experimental design included two treatments: native wildflower pasture(NWP, turf grasses 6 species + native wildflower 11 species) and introduced wildflower pasture(lWP, turf grasses 6 species + introduced wildflower 9 species). The field trials were carried out on the experimental pasture plots at Chungnam National University from 1997 to 2000. The results obtained are as follows: 1. The flowering of wildflower was maintained continuously from May to September, and the colors of wildflowers; varied seasonally during this period. With native flowers, however, Hemerocallis fulva, Belamcanda chinenis and Aster koraiensisi showed problems in lately germination and early establishment. Meanwhile, Introduced wildflower showed not only excellent germination and early establishment compared to native flowers species but also maintained brighter colors. But Coreopsis tinctoria, Achillea mi/lefolium and Rudbeckia bicolor had colonized at a higher height or possessed stronger rhizome. 2. The appropriate species of turf grass which maintained continuous seasonal distribution are thought to be tall fescue, perennial ryegrass. Kentucky bluegrass in NWP and IWP. 3. Botanical composition of wild flower in NWP was arranged in the order of Achillea sibirica > Lotus corniculatus var. Japonicus > Dianthus chinensis > Plantago asiatica > Taraxacum pla~ycarpum > Viola mandshurica > Aster koraiensis > Vicia tetasperma > Lespedeza stipulacea > Hemerocallis fulva, respectively. The highest seasonal distribution of native wildflower, Achillea sibirica was in spring and summer, Lotus corniculatus var. Japonicus was in autumn. Botanical composition of wild flower in IWP was arranged in the order of Achillea millefolium Coreopsis tinctoria > Silene armeria > Coreopsis lanceolata > Rudbeckia bicolor > Sanguisorba oficinalis > Centaurea cyanus > Chrysanthemum leucanthemum > Dianthus petraeus, respectively. The highest seasonal distribution of introduced wildflower, Silene armeria was in spring, Achillea millefolium was in summer, and Coreopsis tinctoria was in autumn.

• Journal of Biomedical Engineering Research
• /
• v.23 no.1
• /
• pp.49-60
• /
• 2002

Receive dynamic focusing with an array transducer can provide near optimum resolution only in the vicinity of transmit focal depth. A customary method to increase the depth of field is to combine several beams with different focal depths, with an accompanying decrease in the frame rate. In this Paper. we Present a simultaneous multiple transmit focusing method in which chirp signals focused at different depths are transmitted at the same time. These chirp signals are mutually orthogonal in a sense that the autocorrelation function of each signal has a narrow mainlobe width and low sidelobe levels. and the crossorelation function of any Pair of the signals has values smaller than the sidelobe levels of each autocorrelation function. This means that each chirp signal can be separated from the combined received signals and compressed into a short pulse. which is then individually focused on a separate receive beamformer. Next. the individually focused beams are combined to form a frame of image. Theoretically, any two chirp signals defined over two nonoverlapped frequency bands are mutually orthogonal In the present work. however, a tractional overlap of adjacent frequency bands is permitted to design more chirp signals within a given transducer bandwidth. The elevation of the rosscorrelation values due to the frequency overlap could be reduced by alternating the direction of frequency sweep of the adjacent chirp signals We also observe that the Proposed method provides better images when the low frequency chirp is focused at a near Point and the high frequency chirp at a far point along the depth. better lateral resolution is obtained at the far field with reasonable SNR due to the SNR gain in Pulse compression Imaging .

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.4
• /
• pp.365-372
• /
• 2012

Purpose: To investigate ocular higher order aberrations (HOA) and spherical aberration changes caused by an aspheric soft contact lens designed to reduce spherical aberration (SA) of the eye. Methods: Fifty subjects who have successfully experienced soft contact lenses were refitted with aspheric design (Soflens Daily Disposable: SDD, Bausch+Lomb) soft contact lens. Ocular higher order aberrations (HOA) and stand alone SA were measured and analyzed for a 4-mm pupil size using Wave-Scan Wavefront$^{TM}$ aberrometer (VISX, Santa Clara, CA, USA). High and low contrast log MAR visual acuity and contrast sensitivity function (CSF) were also measured under photopic and mesopic conditions (OPTEC 6500 Vision Tester$^{(R)}$). All measurements were conducted monocularly with an undilated pupil. Results: The RMS mean values for total HOA with SDD contact lenses were significantly lower than those at with unaided eyes (p<0.001) and a reduction for SA in the SDD was close to the baseline SA (zero ${\mu}m$) (p<0.001). For the SDD lens, there was a statistically significant correlation between the changes in the total HOA and the contact lens power (r=0.237, p=0.018) as well as between the changes in SA and the lens power (r=0.324, p=0.001). High contrast visual acuity (HCVA) and low contrast visual acuity (LCVA) with SDD lenses were $-0.063{\pm}0.062$ and $0.119{\pm}0.060$, respectively under photopic and $-0.003{\pm}0.063$ and $0.198{\pm}0.067$, respectively under mesopic condition. Contrast Sensitivity Function (CSF) with SDD lenses under both photopic and mesopic conditions was $3.095{\pm}0.068$ and $3.087{\pm}0.074$, respectively. Conclusions: The SDD contact lens designed to control SA reduced the total ocular HOA and SA of the eye, resulting in compensating for positive SA of the eyes. Thus, the optical benefits of the lens with SA control would be adopted for improving the quality of vision.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.3
• /
• pp.15-22
• /
• 2010

Today's rapid shifts toward a new paradigm are combining city spaces with reality and technology, which is known as a ubiquitous environment. An ubiquitous environment means that 'whenever' and 'wherever' become connected. It is a great possibility that this will change our future lifestyle. Korea has the biggest advantage in the implementation of this new environment, such as having an excellent network infrastructure. Using these attributes of a ubiquitous environment, changes are being made toward ubiquitous cities within developing fields of construction, landscaping, streets, art, and the environment. This research is based on background of research that activated media pole in public city space has been done research about reality of digital skill, fusion, and sense of ubitizen, and Kang-Nam U-street applied by ubiquitous technique. While reflecting an environment that can be utilized in a modern digital society, the application of ubiquitous technology to media pole can be a space for the two-way communication of the current paradigm. It would also be meaningful to create a new cultural space through media pole. Through evaluation, citizens of the ubiquitous age are going to interact to raise the satisfaction that media pole in city space can prevent giving direction to develop and trial and error about service ability, identity, and publicity. Finally, the media pole can be used as a fundamental element to suggest directions for change when viewed as future development.

• The Korean Journal of Community Living Science
• /
• v.16 no.4
• /
• pp.47-57
• /
• 2005

To investigate the characteristics of edible flowers as a food material, we have examined the kinds, colors, sizes, fresh weights, pigments and shipping periods of edible flowers marketed on the cropping farms, selling agencies and Internet shopping malls from February through September, 2005. Thirty six kinds of edible flowers were marketed in Korea, and all but the chrysanthemum were introduced species. The characteristics of edible flowers were shown differently by the varieties following the same kinds of flowers. Those colors were yellow (twenty five kinds), red (twenty three), pink (twenty), white (eighteen), and orange (sixteen). Flower diameters were measured and showed that seven kinds of edible flowers were 1.0 to 2.0cm, fourteen 2.0 to 3.0cm, sixteen 3.0 to 4.0cm, eight 4.0 to 5.0cm, and nine over 5.0cm. Flower fresh weights were measured as follows: twenty one kinds of edible flowers were under 0.5g ($58.3\%$), eight were $0.6\∼1.0g(22.2\%$), and six were $1.1{\∼}1.5g(16.7\%$). The taste of edible flowers was often bitter (twenty one kinds), sweet and sour (seven), somewhat fragrant (six), fishy (three), and others (nine). The pigments of edible flowers were anthoxanthin (twenty seven kinds), flavonoid (twenty three), carotenoid (seventeen), and betanidin (four).