• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.6
• /
• pp.691-698
• /
• 2016

This study was carried out to investigate the characterization of iron oxide nanotubes (INTs) by anodization method and applied adsorption isotherms and kinetic models for phosphate adsorption. SEM analysis was conducted to examine the INTs surface formation. Further XRD and XPS analysis were performed to observe the crystal structure of INTs before and after phosphate adsorption. AFM analysis was conducted to determine of Fe foil surface before and after anodization. Phosphate stock solution for adsorption experiment was prepared by $KH_2PO_4$. The batch experiment was conducted using 20 ml phosphate stock solution and $40cm^3$ of INTs in 50 ml conical tube. Adsorption isotherms were applied Langmuir and Freundlich models for adsorption equilibrium test of INTs. Pseudo first order and pseudo second order models were applied for interpretation of adsorption rate by reaction time. The determination coefficient ($R^2$) values of Langmuir and Freundlich models were 0.9157 and 0.8876 respectively.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.4
• /
• pp.462-466
• /
• 1998

The homobimetallic anion, $({\eta}^5-MeCp)Mn(CO)_2Mn(CO)_5-M^+\; (M^+=Na^+, PPN^+$) was disrupted by $PR_3\;(R=C_6H_5,\;C_2H_5,\;OCH_3)$ in THF at various temperatures (r.t. ∼65℃) under the pseudo first order reaction conditions where excess of $PR_3$ was employed under a nitrogen atmosphere. For the reaction involving $PPN^+$ analog, Mn-Mn heterolytic cleavage occurred, leading to $PPN^+Mn(CO)_5^-\; and \;({\eta}^5-MeCp)Mn(CO)_2PR_3$ as products; however, in case of $Na^+\; analog,\; Na^+$ seems to play a novel counter ion effect on the disruption reaction by transferring one terminal CO from the $Mn(CO)_5$ moiety on to the $({\eta}^5-MeCp)Mn(CO)_2$ of the corresponding homobimetallic complex, eventually resulting in $Na^+Mn(CO)_4PR_3^-\;and\;({\eta}^5-MeCp)Mn(CO)_3$. This reaction is of overall first order with respect to [homobimetallic complex] with the activation parameters (ΔH≠=23.0±0.7 kcal/mol, ΔS≠= - 8.7±0.8 e.u. for $Na^+$ analog; ΔH≠=28.8±0.4 kcal/mol, ΔS≠=15.7±0.6 e.u. for $PPN^+$ analog reaction).

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.2
• /
• pp.9-16
• /
• 2015

The control law for simultaneous pressure and thrust control of solid DACS(Divert Attitude Control System) is suggested. To regulate the two variables effectively, the control structure of sequential loop closer is applied to the system considering the physical characteristics of each variable and the weighted pseudo-inverse method is suggested to allocate effective command for indeterminate system. Also, the pressure guidance law for safe and high acceleration is applied to the homing stage to verify the effectiveness of the command distribution.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2875-2882
• /
• 2013

The design of PN(Pseudo Noise) sequences with good cross-correlation properties is important for many research areas in communication systems. Also analyses of cross-correlation frequency between designed sequences have been researched. In this paper we analyze of cross-correlation distribution and properties of non-linear binary sequences family $S^r=\{Tr^m_1\{[Tr^n_m(a{\alpha}^t+{\alpha}^{dt}]^r\}{\mid}a{\in}GF(2^m),0{\leq}t < 2^n-1\}$, where $gcd(r,2^m-1)=1$ with 5-valued cross-correlation.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.581-586
• /
• 2015

Adsorption of Safranin using granular activated carbon from aqueous solution was investigated. Batch experiments were carried out as a function of adsorbent dose, initial concentration, contact time and temperature. The equilibrium adsorption data were fitted to Langmuir, Freundlich and Dubinin-Radushkevich isotherm models. Based on an estimated Langmuir separation factor, $R_L=0.183{\sim}0.254$ and a Freundlich separation factor, 1/n = 0.518~0.547, this process could be employed as an effective treatment method. Adsorption data were also modeled using the pseudo-first and second-order kinetic equations. It was shown that the pseudo-second-order kinetic equation could best describe the adsorption kinetics. The negative Gibbs free energy (${\Delta}G=-3.688{\sim}-7.220kJ/mol$) and positive enthalpy (${\Delta}H=33.126kJ/mol$) indicated that the adsorption process was spontaneous and endothermic.

• Membrane and Water Treatment
• /
• v.9 no.2
• /
• pp.95-104
• /
• 2018

Copper pollution around the world has caused serious public health problems recently. The heavy metal adsorption on traditional membranes from wastewater is limited by material properties. Different adsorptive materials are embedded in the membrane matrix and act as the adsorbent for the heavy metal. The carbonized leaf powder has been proven as an effective adsorbent material in removing aqueous Cu(II) because of its relative high specific surface area and inherent beneficial groups such as amine, carboxyl and phosphate after carbonization process. Factors affecting the adsorption of Cu(II) include: adsorbent dosage, initial Cu(II) concentration, solution pH, temperature and duration. The kinetics data fit well with the pseudo-first order kinetics and the pseudo-second order kinetics model. The thermodynamic behavior reveals the endothermic and spontaneous nature of the adsorption. The adsorption isotherm curve fits Sips model well, and the adsorption capacity was determined at 61.77 mg/g. Based on D-R model, the adsorption was predominated by the form of physical adsorption under lower temperatures, while the increased temperature motivated the form of chemical adsorption such as ion-exchange reaction. According to the analysis towards the mechanism, the chemical adsorption process occurs mainly among amine, carbonate, phosphate and copper ions or other surface adsorption. This hypothesis is confirmed by FT-IR test and XRD spectra as well as the predicted parameters calculated based on D-R model.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.4
• /
• pp.301-309
• /
• 2021

Chitosan, natural organic polymer, has been applied in water treatment as adsorbent due to non-toxic for human being. The amino group as functional group, can interacts with cation and anion at the same time. The prepared chitosan bead (HCB) was crosslinked to increase chemical stability (HCB-G) and both HCB and HCB-G were prepared to increase physical strength by drying referred to DCB and DCB-G, respectively. The adsorption effect for crosslinking and drying for four types of chitosan bead was tested using pseudo fist order (PFO), pseudo second order (PSO), and intraparticle diffusion model (ID). Regardless of PFO and PSO, the order of K, rate constant, is as followed: HCB > HCB-G > DCB > DCB-G for Cu(II) and phosphate. Drying leading to contraction of bead significantly reduced adsorption rate due to reduce the porosity of chitosan. In addition, crosslingking also negatively effect on adsorption rate. When compared with Cu(II) using hydrogel bead, phosphate showed higher value than Cu(II) for PFO and PSO. The application of ID showed that both hydrogel beads (HCB and HCB-G) obtained a very low R² ranging to 0.37 to 0.81, while R² can be obtained to over 0.9 for DCB and DCB-G, indicting ID is appropriate for low adsorption rate.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.3
• /
• pp.184-192
• /
• 2023

Microplastics are generated by the breakdown of plastic wastes in agricultural soil and residual pesticides in agricultural soil can adsorb on microplastics. In this study, the sorption characteristics of procymidone (PCM) and one of its metabolites, 3,5-dichloroaniline (DCA), on low-density polyethylene (LDPE) and polyvinyl chloride (PVC) microplastics were investigated. The sorption and desorption tests were carried out for 72 h using LDPE or PVC microplastic films to study the sorption isotherms of PCM and DCA and kinetics for sorption and desorption of PCM. The results show that the sorption data of PCM and DCA were better described by the Freundlich isotherm model (R²=0.7568-0.9915) than the Langmuir isotherm model (R²=0.0545-0.5889). The sorption potential of PVC for both PCM and DCA was greater than that of LDPE. The sorption data of PCM on PVC and LDPE were fitted better to the pseudo-second-order kinetic model than the pseudo-first-order kinetic model. The PCM sorption on LDPE was about three times faster than that on PVC. Both microplastic films released the sorbed PCM back to water, and more PCM was released from PVC than LDPE, but the desorption rate was faster with LDPE than PVC. Overall, the results show that different microplastics have different sorption characteristics for different chemicals. Also, the sorbed chemicals can be released back to environment suggesting the potential of contaminant spread by microplastics. Thus, the management practices of microplastics in agricultural soil need to consider their interaction with the chemical contaminants in soil.

• Journal of the Korean Chemical Society
• /
• v.54 no.3
• /
• pp.300-309
• /
• 2010

The ability of sodium-exchanged clay particles as an adsorbent for the removal of commercial dyes, Methylene blue (MB) and Malachite green oxalate (MG) from aqueous solutions has been investigated under various experimental conditions. The effect of the experimental parameters, such as pH solution, agitation time, adsorbate concentration and adsorbent dose were examined. Maximum adsorption of dyes, i.e. >90% has been achieved in aqueous solutions using 0.03 g of clay at a pH of 7 and 298 K for both dyes. The adsorption process was a fast and the equilibrium was obtained within the first 5 min. For the adsorption of both MB and MG dyes, the pseudo-second-order reaction kinetics provides the best correlation of the experimental data. The adsorption equilibrium results follow Langmuir and Dubini-Radushkevich (D-R) isotherms with high regression coefficients $R^2$ > 0.98. The mean free energies $E_a$ of adsorption from D-R model were 3.779 and 2.564 kj/mol for MB and MG respectively, which corresponds to a physisorption process.

• The Korean Journal of Ecology
• /
• v.20 no.2
• /
• pp.125-132
• /
• 1997

A study of forest vegetation in Mt. $T\v{o}kyu$ National Park was investigated by ordination technique. By TWINSPAN(Two-Way Indicator Species Analysis) method, 10 groups were recognized as follows: pinus densiflora, Quercus variabilis, Quercus serrata, Quercus mongolica-Rhododendron schlippenbachii, Quercus mongolica-Abies koreana, Quercus mongolica-Acer pseudo-sieboldi-amum, Quercus mongolica-Symplocos chinensis for. pilosa, Carpinus laxiflora, Fraxinus mandshurica and Taxus cuspidata groups. The floristic composition of these groups showed high correlation to soil moisture(r=0.831), altitude(r=0.784), topography(r=-0.722), organic matter(r=0.642), and pH(r=-0.509) among various environmental factors. According to the results of CCA(Canonical Correspondence Analysis) Pinus densiflora group and Quercus variabilis group were situated in a xeric area at a lower altitude where soil nutrients were poor compared with the other groups. Fraxinus mandshurica group was distributed throughout the valley with high soil moisture and good nutrients, Quercus serrata group and Carpinus laxiflora group were found in the low altitude region with good nutrients, Quercus mongolica group, at the high altitude region with good nutrients, and Quercus mongolica-Acer koreana and Taxus cuspidata at higher altitudes(1, 400-1600 m).