• 제목/요약/키워드: Providing conditions

검색결과 1,008건 처리시간 0.027초

A ZCT Double-Ended Flyback Converter with Low EMI

  • Yazdani, Mohammad Rouhollah;Rahmani, Saeid;Mohammadi, Mehdi
    • Journal of Power Electronics
    • /
    • 제15권3호
    • /
    • pp.602-609
    • /
    • 2015
  • In this paper, a zero current transition (ZCT) double-ended flyback converter is proposed. All of the switching elements act under soft switching conditions and the voltage stress of the main switches is limited to the input voltage due to the innate behavior of the double-ended flyback converter. Providing soft switching conditions and clamping the voltage stress improves the efficiency and electromagnetic compatibility (EMC). The Proposed converter is analyzed in detail and its operating modes are discussed in detail. Experimental results are presented to verify the theoretical predictions. Moreover, the conducted electromagnetic emissions of the proposed ZCT double-ended flyback converter are measured to show another merit of the proposed converter in addition to providing soft switching conditions. The measured electromagnetic interference (EMI) of the proposed converter demonstrates that its EMI is lower than the conventional double-ended flyback converter. Furthermore, two simple and cost effective EMI reduction methods are applied to satisfy the EMC standard.

NEW CONVERGENCE CONDITIONS OF SECANT METHODS VIA ALPHA THEORY

  • KIM, S.
    • Journal of the Korean Society for Industrial and Applied Mathematics
    • /
    • 제5권2호
    • /
    • pp.101-115
    • /
    • 2001
  • Recent theoretical analysis of numerical methods for solving nonlinear systems of equations is represented by alpha theory of Newton method developed Smale et al. The theory was extended to Secant method by providing convergence conditions by Yakoubsohn which the Secant method is treated as an operator defined for analytical functions. We use Secant methods as an iterative scheme with approximations, which results in new convergence conditions. We compare the two conditions and show that the new conditions represent the features of Secant method in a more precise way.

  • PDF

공동주택의 생활관리 프로그램 개발 -미국 블랙스버그시의 공동주택 생활관리 실태와 평가를 중심으로- (The Development of Community Programs in Multihousing -The Evaluation and the Actual Conditions of Community in Multihousing in the City of Blacksburg, Virginia, U.S.A-)

  • 강순주
    • 한국주거학회논문집
    • /
    • 제12권2호
    • /
    • pp.55-63
    • /
    • 2001
  • The purpose of this study was to develop the community programs of multihousing in Korea through evaluating and analyzing the actual conditions of community in multihousing in U.S.A. This study was conducted by using a field survey and questionaire at the 2 multihousing complexes located in the City of Blacksburg, Virginia, U.S.A. The major findings were as follows: 1) There was a variety of community programs and facilities, such as a monthly newsletter which allowed information to be exchanged among all residents. The programs also provided news on events for the children, teenagers, college students, adults and seniors. These events were held at the club house or pond area. 2) The average degree of satisfaction of these programs and facilities was high. 3) Korea need to follow the example of the U.S.A by i) providing a monthly newsletter periodically to exchange information ii) offering a variety of community programs iii) providing programs regarding district bureau of public administration, kindergarten service, telecommunications office and holding service for package, registered mail, drycleaning, etc.

  • PDF

ROBUST NUMERICAL METHOD FOR SINGULARLY PERTURBED TURNING POINT PROBLEMS WITH ROBIN TYPE BOUNDARY CONDITIONS

  • GEETHA, N.;TAMILSELVAN, A.
    • Journal of applied mathematics & informatics
    • /
    • 제37권3_4호
    • /
    • pp.183-200
    • /
    • 2019
  • We have constructed a robust numerical method on Shishkin mesh for a class of convection diffusion type turning point problems with Robin type boundary conditions. Supremum norm is used to derive error estimates which is of order O($N^{-1}$ ln N). Theoretical results are verified by providing numerical examples.

등산로 조건을 실시간으로 지원하는 VR 기반의 사이버 등산 시스템 (VR-based Hiking System that supports Real-time Field Condition)

  • 고대식
    • Journal of Platform Technology
    • /
    • 제6권4호
    • /
    • pp.78-86
    • /
    • 2018
  • 본 논문에서는 유명한 산에 대한 가상현실을 제공하고, 등산하고자 하는 산에 대한 기온, 공기, 음향, 메아리 등의 실제 산 환경요인을 제공하여 실제 등산할 때 느끼는 오감과 실감을 지원할 수 있는 VR기반의 사이버 등산 시스템을 설계하였다. 실시간 현장상황을 반영하는 VR기반의 사이버 등산 시스템은 크게 실시간 현장의 데이터를 수집하는 데이터 수집모듈, 현장의 데이터를 이용하여 사용자에게 오감을 느끼게 하는 다수개의 구동모듈 그리고 구동모듈에서 제공되는 자극과 사용자의 신체변화추이를 감지하기 위한 센서모듈로 설계하였다. 제안된 사이버 등산시스템은 기존의 VR기반 등산시스템과 달리, 등산하고자 하는 산에 대한 단순한 가상현실뿐만이 아니고 실제 산의 자연조건들을 제공할 수 있고 등산로의 오르막 내리막까지 구현이 가능할 것이다. 특히, 실제 등산에서 발생할 수 있는 불필요한 조건과 위험요소는 배제하고 오히려 실제 등산로에 다람쥐와 같은 증강현실을 지원하여 사용자에게 재미와 게임적 요소를 제공하는 효과가 있다. 또한, 등산 전후 신체의 변화를 사용자에게 제공함으로써, 등산높이, 경사도, 등산속도 등의 다양한 피드백을 제공할 수 있는 효과가 있을 것으로 기대된다.

실시간 비침습적 뇌전기 자극이 양손 힘 조절능력에 미치는 영향 (Online-Effects of Transcranial Direct Current Stimulation on Bimanual Force Control Performances in Healthy Young Adults)

  • Tae Lee, Lee;Joon Ho, Lee;Nyeonju, Kang
    • 한국운동역학회지
    • /
    • 제32권4호
    • /
    • pp.121-127
    • /
    • 2022
  • Objective: The purpose of this study was to investigate potential effects of transcranial direct current stimulation (tDCS) on bimanual force control capabilities in healthy young adults. Method: Eighteen right-handed healthy young adults (10 females and 8 males; age: 23.55 ± 3.56 yrs) participated in this crossover design study. All participants were randomly allocated to both active-tDCS and sham-tDCS conditions, respectively. While receiving 20 min of active- or sham-tDCS interventions, all participants performed bimanual isometric force control tasks at four submaximal targeted force levels (i.e., 5%, 10%, 15, and 20% of maximal voluntary contraction: MVC). To compare bimanual force control capabilities including force accuracy, variability, and regularity between active-tDCS and sham-tDCS conditions, we conducted two-way repeated measures ANOVAs (2 × 4; tDCS condition × Force levels). Results: We found no significant difference in baseline MVC between active-tDCS and sham-tDCS conditions. Moreover, our findings revealed that providing bilateral tDCS including anodal tDCS on left primary motor cortex (M1) and cathodal on right M1 while conducting bimanual force control trials significantly decreased force variability and regularity at 5%MVC. Conclusion: These findings suggest that providing bilateral tDCS on M1 areas may improve bimanual force control capabilities at a relatively low targeted force level.

Surface elasticity-based modeling and simulation for dynamic and sensing performances of nanomechanical resonators

  • Kilho Eom
    • Advances in nano research
    • /
    • 제14권3호
    • /
    • pp.285-294
    • /
    • 2023
  • The dynamic and sensing performances of nanomechanical resonators with their different boundary conditions are studied based on surface elasticity-based modeling and simulation. Specifically, the effect of surface stress is included in Euler-Bernoulli beam model for different boundary conditions. It is shown that the surface effect on the intrinsic elastic property of nanowire is independent of boundary conditions, while these boundary conditions affect the frequency behavior of nanowire resonator. The detection sensitivity of nanowire resonator is remarkably found to depend on the boundary conditions such that double-clamping boundary condition results in the higher mass sensitivity of the resonator in comparison with simple-support or cantilever boundary condition. Furthermore, we show that the frequency shift of nanowire resonator due to mass adsorption is determined by its length, whereas the frequency shift is almost independent of its thickness. This study enables a design principle providing an insight into how the dynamic and sensing performances of nanomechanical resonator is determined and tuned.

기상조건별 비산먼지 관리체계 최적화 연구 (Optimization of Fugitive Dust Control System for Meteorological Conditions)

  • 김현구
    • 한국대기환경학회지
    • /
    • 제21권6호
    • /
    • pp.573-583
    • /
    • 2005
  • Fugitive dust, which is emitted in the ambient air without first passing through a stack or duct designed to control flow, is frequently generated by means of wind erosion from storage yards at Pohang Steel Wokrs. The size distribution of fugitive dust is mostly in the range of coarse particulate which is deposited as soon as emitted and less harm to human health; however $20\%$ of fugitive dust contains PM 10 known as one of most harmful airborne pollutant. Consequently, effective control and reduction of fugitive dust is strongly requested by the local society, but it is not easy so far because the generation and dispersion of fugitive dust highly depends on meteorological conditions, and it being occurred for irregularity. This research presented a fugitive dust control system for each meteorological condition by providing statistical prediction data obtained from a statistical analysis on the probability of generating the threshold velocity at which the fugitive dust begins to occur, and the frequency occurring by season and by time of the wind direction that can generate atmospheric pollution when the dispersed dust spreads to adjacent residential areas. The research also built a fugitive dust detection system which monitors the weather conditions surrounding storage yards and the changes in air quality on a real-time basis and issues a warning message by identifying a situation where the fugitive dust disperses outside the site boundary line so that appropriate measures can be taken on a timely basis. Furthermore, in respect to the spraying of water to prevent the generation of fugitive dust from the storage piles at the storage yard, an advanced statistical meteorological analysis on the weather conditions in Pohang area and a case study of fugitive dust dispersion toward outside of working field during $2002\∼2003$ were carried out in order to decide an optimal water-spraying time and the number of spraying that can prevent the origin of fugitive dust emission. The results of this research are expected to create extremely significant effects in improving surrounding environment through actual reduction of the fugitive dust produced from the storage yard of Pohang Steel Works by providing a high-tech warning system capable of constantly monitoring the leakage of fugitive dust and water-spray guidance that can maximize the water-spraying effects.

Factors That Enable Reintermediation

  • Kwon, Sun-Ok;Lee, Hong-Kyu
    • 한국경영정보학회:학술대회논문집
    • /
    • 한국경영정보학회 2007년도 International Conference
    • /
    • pp.378-381
    • /
    • 2007
  • Traditional intermediaries refer to service providers such as travel agents, real estate brokers, job agencies and insurance agents which matching services for buyers and suppliers in a traditional market. The introduction of Electronic commerce resulted in the automation of many tasks provided by intermediaries and seemed to eliminate the role of many traditional intermediaries, which is called disintermediation. However, depending on their market power, traditional intermediaries either will be disintermediated or fill new roles by providing added value and assistance, which is called reintermediation. According to the research of Alina M. Chircu et al. there are three conditions for reintermediation for traditional intermediaries. Three conditions are weak appropriability of EC innovations, ownership of co-specialized assets for both market intermediation and EC innovations and economies of scale. Besides these three reintermediation conditions, we hypothesize that leveraging BPO can be a suitable strategy for traditional intermediaries to be transformed into reintermediaries. Business Process Outsourcing (BPO) is the leveraging of technology or specialist process vendors to provide and manage an organization's critical and/or non-critical enterprise processes and applications. This paper will investigate the relationship between above reintermediation conditions including BPO and reintermediation.

  • PDF

풍동실험에서 상사조건이 실험결과에 미치는 영향에 관한 연구 (The Effect of Similarity Condition for the Test Results in a Wind Tunnel Test)

  • 봉춘근
    • 한국대기환경학회지
    • /
    • 제16권4호
    • /
    • pp.351-362
    • /
    • 2000
  • To set the similarity conditions between a prototype usually in the field and its reduced-scale model is a crucial part in model tests. No technique is available to keep perfect similarity for this procedure so far. The experimental work using a wind tunnel is not exceptional. based on the field measurements, the effect of stack parameters and wind conditions on the dispersion of stack plume has been investigated in the laboratory. in this paper intensive methodology is focused on matching these similarities. Due to the limitations to keep perfect similarity conditions some simplifications are involved in common. In this study geometric conditions and kinematic conditions using Froude number and Reynolds number have been con-sidered to keep the similarity conditions required. From the tests it is found that the critical Reynolds number (Recrit) is 2,700 when the height of stack discharge is 50mm. The dispersion has a similar trend for the higher Reynolds number than the critical Reynolds number. It is also found that different Froude number does not make any significant influence for the normalized tracer gas concentrations at the recipient providing the same ratio of the wind speed to the discharge speed. No significant effect of stack diameter is observed in the normalized tracer gas concentrations with the same Frounde number. The similarity conditions therefore used in this study are reliable to simulate the conditions in prototype into the wind tunnel tests.

  • PDF