• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.467-479
• /
• 2023

Satellite altimeters have continuously observed sea surface height (SSH) in the global ocean for the past 30 years, providing clear evidence of the rise in global mean sea level based on observational data. Accurate altimeter-observed SSH is essential to study the spatial and temporal variability of SSH in regional seas. In this study, we used measurements from the Ieodo Ocean Research Station (IORS) and validate SSHs observed by satellite altimeters (Envisat, Jason-1, Jason-2, SARAL, Jason-3, and Sentinel-3A/B). Bias and root mean square error of SSH for each satellite ranged from 1.58 to 4.69 cm and 6.33 to 9.67 cm, respectively. As the matchup distance between satellite ground tracks and the IORS increased, the error of satellite SSHs significantly amplified. In order to validate the correction of the tide and atmospheric effect of the satellite data, the tide was estimated using harmonic analysis, and inverse barometer effect was calculated using atmospheric pressure data at the IORS. To achieve accurate tidal corrections for satellite SSH data in the seas around the Korean Peninsula, it was confirmed that improving the accuracy of tide data used in satellites is necessary.

• Korean Journal of Remote Sensing
• /
• v.29 no.1
• /
• pp.123-135
• /
• 2013

The reflectance observed in the visible channels of a geostationary meteorological satellite can be used to calculate the amount of cloud by comparing the reflectance with the observed solar radiation data at the ground. Using this, the solar radiation arriving at the surface can be estimated. This study used the Meteorological Imager (MI) reflectance observed at a wavelength of 675 nm and the Geostationary Ocean Color Imager (GOCI) reflectance observed at similar wavelengths of 660 and 680 nm. Cloudy days during a typhoon and sunny days with little cloud cover were compared using observation data from the geostationary satellite. Pixels that had more than 40% reflectance in the satellite images showed less than 0.3 of the cloud index and blocked more than 70% of the solar energy. Pixels that showed less than 15% reflectance showed more than 0.9 of the cloud index and let through more than 90% of the solar energy to the surface. The calculated daily accumulated solar radiation was compared with the observed daily accumulated solar radiation in 22 observatories of the Korean Meteorological Administration. The values calculated for the COMS and MTSAT MI sensors were smaller than the observation and showed low correlations of 0.94 and 0.93, respectively, which were smaller than the 0.96 correlation coefficient calculated for the GOCI sensor. The RMSEs of MTSAT, COMS MI and GOCI calculation results showed 2.21, 2.09, 2.02 MJ/$m^2$ in order. Comparison of the calculated daily accumulated results from the GOCI sensor with the observed data on the ground gave correlations and RMSEs for cloudy and sunny days of 0.96 and 0.86, and 1.82 MJ/$m^2$ and 2.27 MJ/$m^2$, respectively, indicating a slightly higher correlation for cloudy days. Compared to the meteorological imager, the geostationary ocean color imager in the COMS satellite has limited observation time and observation is not continuous. However, it has the advantage of providing high resolution so that it too can be useful for solar energy analysis.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.5
• /
• pp.134-147
• /
• 2014

Pleasure grounds, which were introduced during the Japanese colonial era, were places for organizing new amusement activities, and developed into a large-scale private spaces and a new type of public space at the same time. This study explores the scenery and accommodations of pleasure grounds and the changes of the amusement culture through the Wolmido Pleasure Grounds, which was a typical pleasure grounds of the time. At that time, Wolmido became a comprehensive amusement/entertainment place with many elements of both Western and Japanese pleasure grounds such as exotic buildings harmonized with trees, a beach, a seaside school, public playing field, and zoo constructed on the Island. Wolmido Pleasure Ground, which was connected with Kyungsung by Kyungin railroad during the Japanese colonial era, is a good example showing the process of the popularization and commercialization of the amusement culture. The process of popularization of amusement shows the spreading of the enjoyment of leisure time with amusement activities through appreciating the beautiful scenery of the pleasure grounds among various social classes. The caste system was broken and anyone could use the pleasure grounds by paying the fee, of which there were many kinds, so the distinction between genders and the different classes, such as the Chosun people and Japanese, regarding amusement in pleasure grounds disappeared gradually. Also, pleasure grounds were a place for Western hobby-sports activities and were the means to generalize collective and dynamic activities through summer school and various sport games. At the same time, there were places for deviation from the existing social norms when it was combined with entertainment facilities. The commercialization of amusement took place in the form of an artificial entertainment culture within an artificial environment. First, the scenery was artificially constructed and this scenery created the image of paradise such as 'captivating summer vacation spot' and 'water kingdom'. This was the result of the combined intentions of the colonial authority, the railroad company and the amusement corporation to produce economic profits and encourage development in the area. Second, an artificial spectacle was constructed using nature as the backdrop. Buildings of various styles created a modernized and exotic image when they were combined with each other. Artifacts such as breakwaters and arcades created new attractions for people that enabled them to view both nature and the crowds from a whole different perspective. Third, pleasure grounds contributed to the advent of passive users who would just follow the given use and instructions. In this way, one can find the prototype of popular entertainment places of today such as sightseeing complexes, amusement parks, and theme parks through the construction of amusement grounds as a place for providing dynamic activities.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.2
• /
• pp.79-87
• /
• 2009

Pot experiments using sand culture were conducted in 2004 under greenhouse conditions to evaluate the effect of nitrogen deficiency on red pepper biomass. Nitrogen stress was imposed by implementing 6 levels (40% to 140%) of N in Hoagland's nutrient solution for red pepper. Canopy reflectance measurements were made with hand held spectral sensors including $GreenSeeker^{TM}$, $Crop\;Circle^{TM}$, and $Field\;Scout^{TM}$ Chlorophyll meter, and a spectroradiometer as well as Minolta SPAD-502 chlorophyll meter. Canopy reflectance and dry weight of red pepper were measured at five growth stages, the 30th, 40th, 50th, 80th and 120th day after planting(DAT). Dry weight of red pepper affected by nitrogen stress showed large differences between maximum and minimum values at the 120th DAT ranged from 48.2 to $196.6g\;plant^{-1}$, respectively. Several reflectance indices obtained from $GreenSeeker^{TM}$, $Crop\;Circle^{TM}$ and Spectroradiometer including chlorophyll readings were compared for evaluation of red pepper biomass. The reflectance indices such as rNDVI, aNDVI and gNDVI by the $Crop\;Circle^{TM}$ sensor showed the highest correlation coefficient with dry weight of red pepper at the 40th, 50th, and 80th DAT, respectively. Also these reflectance indices at the same growth station was closely correlated with dry weight, yield, and nitrogen uptake of red pepper at the 120th DAT, especially showing the best correlation coefficient at the 80th DAT. From these result, the aNDVI at the 80th DAT can significantly explain for dry weight of red pepper at the 120th DAT as well as for application level of nitrogen fertilizer. Consequently ground remote sensing as a non-destructive real-time assessment of plant nitrogen status was thought to be a useful tool for in season nitrogen management for red pepper providing both spatial and temporal information.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.6-7
• /
• 2021

Vegetation development in rivers is one of the important issues not only in academic fields such as geomorphology, ecology, hydraulics, etc., but also in river management practices. The problem of river vegetation is directly connected to the harmony of conflicting values of flood management and ecosystem conservation. In Korea, since the 2000s, the issue of river vegetation and land formation has been continuously raised under various conditions, such as the regulating rivers downstream of the dams, the small eutrophicated tributary rivers, and the floodplain sites for the four major river projects. In this background, this study proposes a method for classifying the distribution of vegetation in rivers based on remote sensing data, and presents the results of applying this to the Naeseong Stream. The Naeseong Stream is a representative example of the river landscape that has changed due to vegetation development from 2014 to the latest. The remote sensing data used in the study are images of Sentinel 1 and 2 satellites, which is operated by the European Aerospace Administration (ESA), and provided by Google Earth Engine. For the ground truth, manually classified dataset on the surface of the Naeseong Stream in 2016 were used, where the area is divided into eight types including water, sand and herbaceous and woody vegetation. The classification method used a random forest classification technique, one of the machine learning algorithms. 1,000 samples were extracted from 10 pre-selected polygon regions, each half of them were used as training and verification data. The accuracy based on the verification data was found to be 82~85%. The model established through training was also applied to images from 2016 to 2020, and the process of changes in vegetation zones according to the year was presented. The technical limitations and improvement measures of this paper were considered. By providing quantitative information of the vegetation distribution, this technique is expected to be useful in practical management of vegetation such as thinning and rejuvenation of river vegetation as well as technical fields such as flood level calculation and flow-vegetation coupled modeling in rivers.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.1
• /
• pp.47-56
• /
• 2018

Providing high-quality meteorological observation data at sites that represent actual farming environments is essential for useful agrometeorological services. The Automated Agricultural Observing System (AAOS) of the Korean Meteorological Administration, however, has been deployed on lawns rather than actual farm land. In this study, we show the inaccuracies that arise in AAOS data by analyzing temporal and vertical variation and by comparing them with data recorded by the National Center for AgroMeteorology (NCAM) tower that is located at an actual farming site near the AAOS tower. The analyzed data were gathered in August and October (before and after harvest time, respectively). Observed air temperature and water vapor pressure were lower at AAOS than at NCAM tower before and after harvest time. Observed reflected shortwave radiation tended to be higher at AAOS than at NCAM tower. Soil variables showed bigger differences than meteorological observation variables. In August, observed soil temperature was lower at NCAM tower than at AAOS with smaller diurnal changes due to irrigation. The soil moisture observed at NCAM tower continuously maintained its saturation state, while the one at AAOS showed a decreasing trend, following an increase after rainfall. The trend changed in October. Observed soil temperature at NCAM showed similar daily means with higher diurnal changes than at AAOS. The soil moisture observed at NCAM was continuously higher, but both AAOS and NCAM showed similar trends. The above results indicate that the data gathered at the AAOS are inaccurate, and that ground surface cover and farming activities evoke considerable differences within the respective meteorological and soil environments. We propose to shift the equipment from lawn areas to actual farming sites such as rice paddies, farms and orchards, so that the gathered data are representative of the actual agrometeorological observations.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.23
• /
• pp.155-219
• /
• 2004

This paper focuses on two recent legislative developments in electronic commerce: the "Uniform Computer Information Transactions Act" ("UCITA") of USA and the "preliminary draft convention on the use of data message in [international trade] [the context of international contracts]" ("preliminary draft Convention") of UNCITRAL. UCITA provides rules contracts for computer information transactions. UCITA supplies modified contract formation rules adapted to permit and to facilitate electronic contracting. UCITA also adjusts commonly recognized warranties as appropriate for computer information transactions; for example, to recognize the international context in connection with protection against infringement and misappropriation, and First Amendment considerations involved with informational content. Furthermore, UCITA adapts traditional rules as to what is acceptable performance to the context of computer information transactions, including providing rules for the protection of the parties concerning the electronic regulation of performance to clarify that the appropriate general rule is one of material breach with respect to cancellation (rather than so-called perfect tender). UCITA also supplies guidance in the case of certain specialized types of contracts, e.g., access contracts and for termination of contracts. While for the most part carrying over the familiar rules of Article 2 concerning breach when appropriate in the context of the tangible medium on which the information is fixed, but also adapting common law rules and rules from Article 2 on waiver, cure, assurance and anticipatory breach to the context of computer information transactions, UCITA provides a remedy structure somewhat modeled on that of Article 2 but adapted in significant respects to the different context of a computer information transaction. For example, UCITA contains very important limitations on the generally recognized common law right of self-help as applicable in the electronic context. The UNCITRAL's preliminary draft Convention applies to the use of data messages in connection with an existing or contemplated contract between parties whose places of business are in different States. Nothing in the Convention affects the application of any rule of law that may require the parties to disclose their identities, places of business or other information, or relieves a party from the legal consequences of making inaccurate or false statements in that regard. Likewise, nothing in the Convention requires a contract or any other communication, declaration, demand, notice or request that the parties are required to make or choose to make in connection with an existing or contemplated contract to be made or evidenced in any particular form. Under the Convention, a communication, declaration, demand, notice or request that the parties are required to make or choose to make in connection with an existing or contemplated contract, including an offer and the acceptance of an offer, is conveyed by means of data messages. Also, the Convention provides for use of automated information systems for contract formation: a contract formed by the interaction of an automated information system and a person, or by the interaction of automated information systems, shall not be denied on the sole ground that no person reviewed each of the individual actions carried out by such systems or the resulting agreement. Further, the Convention provides that, unless otherwise agreed by the parties, a contract concluded by a person that accesses an automated information system of another party has no legal effect and is not enforceable if the person made an error in a data message and (a) the automated information system did not provide the person with an opportunity to prevent or correct the error; (b) the person notifies the other party of the error as soon as practicable when the person making the error learns of it and indicates that he or she made an error in the data message; (c) The person takes reasonable steps, including steps that conform to the other party's instructions, to return the goods or services received, if any, as a result of the error or, if instructed to do so, to destroy such goods or services.

• Korean Journal of Environment and Ecology
• /
• v.29 no.6
• /
• pp.850-857
• /
• 2015

This study was aimed to identify the characteristics of nest and breeding site conditions of Chinese Egret (Egretta europhotes) that breed in the uninhabited islets of the western coast of South Korea. It is expected that the information collected through this study can contribute to providing basic information required when building and managing artificial nests in their natural breeding habitats. Chinese Egrets make their nests in the shrub layers of Long Leaf Elaeagnus (Elaeagnus macrophylla), Arrow Bamboo (Pseudosasa japonica), and Baby Brier (Rosa multiflora). A total of 50 breeding nests of Chinese Egret were investigated in June and July 2013, with area-wise distribution as follows: Seomando (11 nests), Hwangseodo (14 nests), Mokdo (10 nests), and Napdaekiseom (15 nests). Vegetation coverage (cover, %), height from the ground to the top (height, cm), thickness from top to bottom of the nest (thickness, cm), reuse period, major axis (cm), minor axis (cm), and depth (cm) of each nest were measured. According to the results of the study on the nest characteristics of 4 breeding groups, the nests in Hwangseodo had the highest coverage, the nests in Mokdo were built in the highest places, the nests in Napdaekiseom showed the longest reuse period, and the nests in Mokdo had the greatest depth. The differences in height and reuse period were significant between Mokdo and Napdaekiseom. Moreover, there were significant differences in reuse period and depth between Seomando and Hwangseodo. There were significant differences in cover, minor axis, and depth between breeding groups that built nests on Arrow Bamboo (Mokdo and Napdaekiseom) and Baby Brier (Seomando and Hwangseodo). Nest characteristics of Chinese Egret were generally similar, while some variables showed different values for different breeding groups.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.4
• /
• pp.24-41
• /
• 2013

This study aims to investigate the complex planning processes and design ideas of the Gwanghwamun Plaza which was opened in 2009. The opening of the plaza was significant as it was built in order to restore the symbolic meaning of axis in the historical Joseon Dynasty that was distorted during the Japanese Imperialism. The plaza itself attracts many citizens and tourists by providing the empty ground carrying historical ambiences around. In this paper, the story of the Gwanghwamun plaza will be summarized. Particularly, the background of promoting the project will be discussed and the whole planning process will be dealt with. The plaza was realized through several stages. First, the planning stage will be reviewed. The planning stage had been a quite long process since the initial idea was discussed. Since the early 90s, the political decision of making the plaza was made through the change of people's understanding toward public space. At this stage, the city government worked together with diverse citizens and professionals to share the vision and to realize the right decision in making the plaza. Second, the design stage will be elaborated in detail. This is the second design stage. The former was the idea competition and the latter was the turn-key base. The final design scheme emphasized the restoration of symbolic axis and the forgotten Yukjo Street. The scheme consists of four zones such as history restoration zone, prospect and history representation zone, culture zone, and the urban zone. Through the whole design process, the original idea remained as it was. The design concept was "a place of memory and prospect." It emphasizes the history representation, view corridor, cultural activities platform as well as the emptiness and flexibility of the basic premise of the plaza. Finally, the construction stage will be discussed. There were some additions and omissions in the construction process. The design chances in the construction stage will be reviewed in detail. After the opening of the plaza, there were some changes in the detail design. We will discuss how and why these modifications were made. In the end, the social and cultural implication of the plaza will be discussed. The storytelling of the Gwanghwamun Plaza will contribute to the clear understanding of planning and design process of pubic places. Based on this reflection, we are able to think about some suggestions of public projects for the future.