• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.1
• /
• pp.19-26
• /
• 2015

The old Samcheok construction company housing in Donghae City was built for employees of Nitrogenous lime factory with railway construction in 1939. The 31 company houses are arranged in a rows including a House A, two No. 2 and 3 Houses, a dormitory, 12 row houses of two households, and 15 row houses of four households. At present, they are preserved with prototype at that time of building as a private company. Researching the architectural characteristics from A and No. $2{\cdot}3$ detached houses of them, the results are as follows. The tea room, living room, and kitchen are centralized and connected with toilet, bathroom, and maid's room by corridor. The exterior wall was finished with paintwork on cement mortar on stud wall framing plastered. The key exterior elements such as diamond shaped asbestos slate, large openings, corner bay window, lintel cornice are in accordance with drawings that they were first designed. The wooden roof structure is based on the structure that supports transverse load with a beam and beam plate instead of thrust. The kitchen and toilet are remodelled and only seem to be a mere shadow of their former self, but the position of sink and toilet bowl is the same as before.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.spc
• /
• pp.23-29
• /
• 2022

To detect harmful chemical substances in seawater, we fabricated a prototype sensor and evaluated its performance. The prototype sensor consisted of a detector, housing, and driving circuit. We built the detector by printing an Indium-Tin-Oxide (ITO) nanoparticle film on a flexible substrate, and it had two detection parts for simultaneous detection of temperature and HNS concentration. The housing connected the detector and the driving circuit and was made of Teflon material to prevent chemical reactions that may affect sensor performance. The driving circuit supplied electric power, and display measured data using a bridge circuit and an Arduino board. We evaluated the sensor performances such as response (ΔR), the limit of detection (LOD), response time, and errors to confirm the specification.

• KIEAE Journal
• /
• v.13 no.4
• /
• pp.103-112
• /
• 2013

The Federal Democratic Republic of Nepal(Nepal) is one of the poorest country in the world. People in Nepal are having lots of housing problems including the lack of housing provision. Even Habitat for Humanity Nepal (HfH_Nepal) has developed various programs to diffuse ecological housing, still there are many problems due to financial and technological shortage. The purpose of this study is to verify the effects of suggestion of performance improvement for HfH_Nepal eco house with introduction of the housing situation and efforts to provide sustainable housing by HfH_Nepal in Terai plain. Ideas on CGI sheet roof with poor insulation, double panel bamboo wall and adobe brick wall which can overcome structural and waterproof flaws of the thin single panel bamboo wall. The experiment result shows that both ideas adapted to adobe brick house reduces daily temperature range 50.8% and humidity adjust effect. For the effective provision of adobe brick house, compressive strength was tested for the bricks made with locally available fiber materials. Brick with jute displayed 41.1% betterment than plain brick with closest packing condition while coconut and straw showed 25.1% and 7.9% improvement respectively. Technical and economic problems brought up during the building and experiment process were listed and countermeasures established. This kinds of building prototype houses and experiments can improve the living conditions of people in developing countries with little supplement of resources. Furthermore, consideration of locally available and affordable material can help the social and ecological sustainability in the world.

• International Journal of Human Ecology
• /
• v.12 no.1
• /
• pp.87-99
• /
• 2011

Purpose- The purpose of this study was to compare the fit of two prototype liquid cooled vests using a 3D body scanner and accompanying software. The objectives of this study were to obtain quantitative measurements of ease values, and to use these data to evaluate the fit of two cooling vests in active positions and to develop methodological protocol to resolve alignment issues between the scans using software designed for the alignment of 3D objects. Design/methodology/approach- Garment treatments and body positions were two independent variables with three levels each. Quantitative dataset were dependent variables, and were manipulated in 3x3 factorial designs with repeated measures. Scan images from eight subjects were used and ease values were obtained to compare the fit. Two different types of analyses were conducted in order to compare the fit using t-test; those were radial mean distance value analysis and radial distance distribution rate analysis. Findings- Overall prototype II achieved a closer fit than prototype I with both analyses. These were consistent results with findings from a previous study that used a different approach for evaluation. Research limitations/implications- The main findings can be used as practical feedback for prototype modification/selection in the design process, making use of 3D body scanner as an evaluation tool. Originality/value- Methodological protocols that were devised to eliminate potential sources of errors can contribute to application of data from 3D body scanners.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1399-1406
• /
• 2011

The reducer of the mixer is one of the main parts of the processor used for water and wastewater treatment. In this study, an advanced reducer with a drywell structure was developed in order to prevent oil leakage during operation in the field. During the development of the advanced reducer prototype, a mockup, a metal mold, and a cast were made using CAD and a CNC machine. The structural safety of the reducer prototype's lower housing (drywell structure) was checked using the ALGOR commercial FEM analysis code, which yielded a von Mises stress of about 123 N/mm2, which is below the yield stress of 250 N/$mm^2$, and a natural frequency of about 650-700 Hz. In addition, the torque transmission efficiency for the advanced prototype was 95.87%, which is about 8% more than that found in a previous study, 88.45%, and the sound level was below 75 dB. Furthermore, no oil leakage or abnormal sound or vibration occurred. Therefore, an optimally designed advanced reducer prototype has been successfully developed.

• Journal of the Korea Convergence Society
• /
• v.3 no.4
• /
• pp.29-34
• /
• 2012

Power window motor assembly including ECU system is important to doors of automobile. This study is done for own development instead of importing of power window motor assembly. This paper is written under five specific subjects. The first, making of prototype sample and analysis of mass-production problem using CAE, the second, design of mass-production mold(2D and 3D), the third, manufacturing of sample mold, the fourth, tryout and measuring of 3 dimensions, the fifth, data analysis and mold modify. In the among them, product sample and analysis of mass-production using CAE, design and manufacture of mass-production mold, and production of sample mold are successfully done. In the results, it is made clear that two cavity and one gate are proper to make a mold of power window motor assembly housing. Besides, it is acquired own technology for mass-production of power window motor.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.2
• /
• pp.359-366
• /
• 2021

It's been more than 30 years since global warming by the increase in CO2 became a cause celebre worldwide. Recently the government promulgated Framework Act on on Low-Carbon Green Growth and has been continuously putting much effort into saving energy and reducing carbon dioxide emissions such as an international climate change conference to prevent the increase in CO2. However, because most cities are not planned for energy saving, new cities should be planned as the active energy-efficient urban structure for 'sustainable urban development' from a long-term perspective. This study aims to design a new prototype for the sustainable energy-independent and environment-friendly housing estates which is the nation's new vision in the era of the Fourth Industrial Revolution. A study on the energy-independent site planning and the quantitative standardization of its factor will be conducted.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.668-672
• /
• 2001

The utility interactive sinewave modulated inverter for the solar photovoltaic (PV) power conversion and conditioning with a new high frequency pulse modulated link is presented for domestic residential applications. As compared with the conventional full-bridge hard switching PWM inverter with a high frequency AC link, the simplest single-ended quasi-resonant soft switching sinewave modulated inverter with a duty cycle pulse control is implemented, resulting in size and weight reduction and low-cost. This paper presents a prototype circuit of the single-ended zero voltage soft switching sinewave inverter for solar power conditioner and its operating principle. In addition, this paper proposes a control system to deliver high quality output current. Major design of each component and the power loss analysis under actual power processing is also discussed from an experimental point of view. A newly developed interactive sinewave power processor which has $92.5\%$ efficiencty at 4kW output is demonstrated. It is designed 540mm-300mm-125mm in size, and 20kg in weight.

• Korean Institute of Interior Design Journal
• /
• v.26 no.5
• /
• pp.34-41
• /
• 2017

It is necessary to conduct a basic research on fusion of ighting design or lighting environment to improve the health and quality of life of elderly people. The purpose of this study is to analyze the lighting situation of elderly people 's residential facilities in terms of space environment design plan and to analyze the trends in smart home, design and technology. It is to provide basic data for the prototype of lighting fixtures for elderly people living facilities considering functional, physiological and emotional characteristics. For the study, the target sites were selected and the results of the illumination survey of the target facilities were divided into two types of spaces, residential and other public spaces, and their location, lighting fixtures' type, color temperature, illuminance. The results of the survey showed that the overall physical illumination compared to the recommended illuminance for the elderly satisfied the recommended range and provided the appropriate brightness for the elderly. However, in the application layout of the lighting fixtures, a monotonous arrangement and a lighting fixtures type consisting entirely of simple square type fixtures and downlight types were applied. It would be desirable to use different types of lighting fixtures in the design for various functions, such as making the environment more comfortable. Future research will propose a prototype for the design direction of the subdivided lighting fixtures that classify the space according to functions and understand the vision problem of the elderly while aesthetically.

• Journal of the Korean housing association
• /
• v.17 no.4
• /
• pp.57-64
• /
• 2006

This research is the survey result of the retirement house in Ochiai area that is a famous as mountain village of Japan. This area is being formed in a steep slope and be arranged the building long a side along the contour line. As for the plan type of a main house 'the middle bedroom three-madori(bay) type' and 'the parallel two madori(bay) type' occupy many. As for in the retirement custom of Ochiai area the independence family style (separation/ separate meal/separate household economy) is a principle and a parents family builds the retirement house and move out. The plan. of the retirement house is two-room type of 'Omote(public room) and Uchi(kitchen and living room)' and agree with the plane prototype 'plan constitution of a necessary minimum' of farmhouse of this area. The reconstruction that the retirement house is remodeled handily with a main home, especially intend the convenience of the life such as a kitchen and toilet has been done. The retirement custom has been succeeded thoroughly until recent years in this area. However, this traditional custom is seeing the end, without there is the successor of a main house with depopulation.