• Korean Journal of Computational Design and Engineering
• /
• v.10 no.4
• /
• pp.293-302
• /
• 2005

The research focused quantitative comparisons of protocols occurring in the architectural massing process using two different tools, three-dimensional(3D) modeler and traditional design tools, to aid architectural massing education. Through the protocol analysis from some experiments, the research identified the following conclusions: 1) Usage of traditional tools produced much higher protocol rate in proposing solution, evaluating proposed solution, explicitness of strategies. This result seemed to be from convenience of traditional tools causing faster visual cognitive cycle. 2) Usage of 3D modeler produced much higher protocol rate concerning attempts of making design vocabulary. The result indicated 3D modeler has relatively effective functions for mass generation and orientation, however it still has some weaknesses on display interface which cause designer's lower idea generations compared to traditional design tools.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2212-2215
• /
• 2002

This dissertation suggests and implements a middle level network which is called PICNET-NP (Plant Implementation and Control Network for Nuclear Power Plant). PICNET-NP is based partly on IEEE 802.4 token-passing bus access method and partly on IEEE 802.3 physical layer. For this purpose a new interface a physical layer service translator, is introduced. A control network using this method is implemented and applied to a distributed real-time system. To verify the performance of proposed protocol experimental were carried out, and the following results are obtained. 1) proper initialization of the protocol. 2) normal receiving and transmission of data. 3) proper switching of transmission media in case of a fault condition on the one of transmission media. The proposed protocol exhibits the excellent performance in the experimental system. From the test results in the experimental system, the proposed protocol, PICNET-NP, can be used for the upgrading of a nuclear power plant and the distributed control system in the next generation of nuclear power plant.

• The Journal of Engineering Research
• /
• v.7 no.1
• /
• pp.37-51
• /
• 2005

An and hoc network is a collection of wireless mobile nodes forming a temporary network without the centralized administration. Due to the limited transmission range of wireless work interface, multiple networks "hops" maybe needed for one node to exchange data with adjacent node. In recent years, a variety of new routing protocol about ad hoc network was developed. This paper presents a new routing protocol based on the Dynamic Source Routing which is not suitable for the high mobility ad hoc network. The Enhanced DR adapts quickly to routing changes when node movement is frequent. When a trunk route is broken, this protocol will utilize the alternative route saved in the route to discovery quickly the new route. It improves the performance of the existing DSR algorithm, so that the negative impacts from weakness of DSR are reduced.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.8
• /
• pp.492-499
• /
• 2003

This paper presents the analysis and the implementation of the asynchronous communication portion of the IEEE 802.11 MAC protocol. We have used PRISM2 chipsets from INTERSIL to build baseband, IF, and RF parts and PCI controller from PLX to interface LLC Layer. We have implemented DCF(Distributed Coordination Function) service using CSMA/CA(Carrier Sense Multiple Access with Collision Acoidance) with backoff algorithm and RTS/CTS protocol. Also, we have implemented TSF(Timing Synchronization Function) which can be used for power management frequency hop synchronization, and other management function. This study can be used as a reference for the MAC protocol implementation and MAC controller design in very high speed wireless LAN which complies with the IEEE 802.11 standard.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.135-145
• /
• 2000

Manufacturing Message Specification (MMS) is designed as a communication standard protocol, ISO/IEC 9506, on factory automation for messaging between heterogeneous programmable unit controller, PLC, NC, Robot, of different vendors on the networks. MMS is also a standard protocol of OSI reference model application layer, In this paper, we show an implementation of MMS over TCP/IP using ANSI-C programming language on the unix environment, and make java classification using java native interface (NJI) with MMS library. The use of java classification provides a basic environment ot overcome a difficult programming with different MMS application programming interface (MMS-I) which requires a siklled programming technique of graphic user interface (GUI). In this paper, we implement a MMS application program of the automated assembly model for printed circuit board based on WWW which shows the operation, control and monitoring of real manufacturing device (RMD) with web browser providing users for consistent user interface.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.89-98
• /
• 2010

Recently supply of Internet is bringing a important change in medical environments. The hospitals which had a different system is required the system that can efficiently share and exchange medical information. In order to transmission medical information between systems, the Health Level Seven(HL7) interface engine development that can convert medical data to HL7 messages is necessary. The HL7 is a standard protocol for data exchange in healthcare environments. In this paper, I implemented HL7 interface engine for Alzheimer's disease in elderly care facility. The interface engine is composed of the client system and the server system. The client system inputs user's medical care data for the aged, and builds them into HL7 message stream. HL7 messages in the client system transmitted over TCP/IP protocol to the server system. The server system parses and validates this messages stream to the segments and fields and then transmits acknowledgement to the client system. I implemented it using the Java and JavaCC. The study of interface engine implementation can be used meaningfully in electronic health record, telemedicine system, and medical information sharing among various healthcare institutions.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.245-252
• /
• 2003

We designed a silicon pressure sensor interface circuit with digital calibration capability. The interface circuit is composed of an analog section and a digital section. The analog section amplifies the weak signal from the sensor and the digital section handles the calibration function and communication function between the chip and outside microcontroller that controls the calibration. The digital section is composed of I2C serial interface, memory, trimming register and controller. The I2C serial interface is optimized to suit the need of on-chip silicon microsensor in terms of number of IO pins and silicon area. The major part of the design is to build a controller circuit that implements the optimized I2C protocol. The designed chip was fabricated through IDEC's MPW. We also made a test board and the test result showed that the chip performs the digital calibration function very well as expected.

• Journal of radiological science and technology
• /
• v.24 no.2
• /
• pp.71-75
• /
• 2001

As the adoption of PACS and hospital information system among university hospitals and hospital level institutions grows bigger, the need of sharing and transferring medical information among medical institutions is rising. For the medical information, which is saved in the hospital medical system, to be transferred within the same hospital, domestic, or foreign medical institutions, a standard protocol is necessary. But realistically, most of the domestic hospitals do not abide by H7L which is the HIS standard and so, information transferring is not possible as of present. As such, the purpose of this research is to implement the information between HIS and PACS to an international standard by constructing HL7 messages through HL7 Interface. which will eventually make possible information transferring between different hospitals. Our research team has developed a method which will make the PACS equip hospitals that do not follow HL7 standard which will make possible to transfer information between HIS and PACS through HL7 Message. By constructing message files, which follow the form of HL7 Message in the HL7 Interface, they can be transferred to PACS through the ftp protocol. The realization of the HIS/OCS Interface through HL7 enables data transferring between domestic and foreign medical institutions possible by implementing the international standard in the PACS and HIS data transferring process. The HL7 that our research team has developed made patient data transfer between medical institutions possible. The Interface is for a specific system model and in order for the data transfer between different systems to be realized, interfaces that are fit for each system must be needed. If the interface is improvised and implemented to each hospital's information system, the data sharing among medical institutions can be broadened.

• Journal of Korea Multimedia Society
• /
• v.4 no.5
• /
• pp.455-464
• /
• 2001

For future multimedia services, one of the most crucial issues is building an access network that can accommodate multimedia services in subscriber network. The VB5.2 interface of B-ISDN located between an access network and a service node allows dynamic allocation and release of ATM resources. The SG 13 of ITU-T is standardizing the B-BCC protocol, which is sequentially interworked with signaling protocols in the service node. To minimize a connection setup delay of the sequential interworking mode, we proposed the parallel interworking model in which the SN executes simultaneously the connection control protocol of VB5.2 interface and signaling protocol. We simulate two interworking models in terms of a connection setup delay and a completion ratio. The results of simulation show that our proposed parallel interworking model for the VB5.2 interface reduces the setup delay and has the similar completion ratio compared to the sequential interworking model. however, the connection setup delay of parallel interworking model becomes about seven tenths of that of the sequential interworking model and the improvement become larger as the arrival rate increased.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.239-247
• /
• 2013

In network based on multi-interface, there are needed channel assignment strategy that reduce interference and improve bandwidth efficiency by assigning each interface to available channels in order to utilize effectively multiple wireless interfaces on each node. MCS protocol had been proposed, which improve capacity and throughput of network by using hybrid assignment. MCS uses as the criterion to assign channel the number of node that use the same channel in contention area. but there have an problem that this information exactly does not reflect actually offered channel load. in this paper, we proposes CAMCS protocol to assign channel by that the channel busy degree to indicate the occupancy rate of channel by nodes as well as the number of nodes that use the same channel in inference area is used as criterion for estimation channel load, and conform performance improvement effect by simulation.