• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.456-458
• /
• 2005

송전선로에서 발생하는 고장은 낙뢰나 수목접지로 인한 순간 고장이 대다수를 차지한다. 따라서 송전선로 보호 기능에 있어서 재폐로 기능은 계통의 안정성 향상과 공급 신뢰도의 제고를 위해서 중요한 역할을 담당한다. 본 논문에서는 154kV 송전선로 보호에 널리 사용되고 있는 디지털 방향비교 보호방식(Directional Comparison Blocking Scheme)에서 보호 구간 내부에 고장이 진전되어 발생했을 때, 재폐로 기능의 동작 특성에 대한 성능 검증 방안에 대해서 기술한다.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.458-460
• /
• 2004

최근의 전력계통의 대형화와 고용량화로 인하여, 전력계통의 안정적으로 운용에 대한 기대가 절실히 요구되고 있다. 이처럼 계통은 안정적으로 운용하기 위하여 계퉁운용상에 발생하는 사고 및 과도상태를 신속, 정확하게 분석하고 판단함으로서 사고구간을 제거하고 피해구간을 최소화 할 수 있는 보호계전 협조와 실제 계통상에서 발생할 수 있는 다양한 사고를 분석하고 진단할 수 있는 향상된 보호계전 알고리즘 개발을 위한 연구가 필요하다. 따라서, 개발 혹은 개선된 보호계전 알고리즘의 평가를 위하여 다양한 사고 모의가 필요하며, 아울러 이를 기계장치 혹은 보호계전기 하드웨어를 시험할 수 있는 시뮬레이터 장치의 구성이 선행되어야 한다. 본 논문에서는 전력계통 과도현상 모의 프로그램인 PSCAD/EMTDC를 이용하여 다양한 계통 사고 모의하며, 결과 사고 데이터를 활용하여 보호계전 알고리즘을 평가하고자 한다. 한괸, 모의한 사고 데이터를 실시간으로 재현하기 위하여 고성능 DAC 인터페이스 장치를 활용하여 구현하고 다양한 사고 데이터를 데이터베이스 형식의 자료 구조로 구성하여, 대상 계전기 장치의 성능과 알고리즘을 검증하기 위한 시뮬레이터를 제안하고자 한다.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.59-62
• /
• 1992

Power system fault transient signals are highly distorted due to the presence of high frequency components in the voltage and current signals and an exponentially decaying dc-offset component in the current signals. Modern protective relays have to make reliable fast decisions about the nature of a fault in the presence of such transients. To use a dc-offset removing filter makes relay algorithms much fast and reliable for detecting a fault. In this paper, several dc-offset removing filters are described, and characteristics of them are compared.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.5
• /
• pp.854-859
• /
• 2010

Distribution Automation System(DAS) is designed to improve operational efficiency by acquisition and control of remote data using its components such as central computation units, communication network and feeder remote terminal units. A conventional human machine interface of the DAS adopts a schematic diagram which is made by drawing power equipments on the geographic information system map. The single line diagram is more useful than the schematic diagram for the main tasks of distribution system operation such as protective relay coordination, service restoration and loss minimization. Since the configuration of the distribution line is changed according to the relocation of the open tie switches, the auto-drawing algorithm based on the connection between the sections and the switches is an essential technique. This paper proposes a new auto-drawing algorithm for a single line diagram of distribution systems based on tertiary tree and collision avoidance method. The feasibility of the proposed algorithm has been testified for various cases using practical distribution system with 12 feeders.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1892-1897
• /
• 2010

In three-phase power, when the power is supplied to the single phase load, there is the unbalance of load in the three-phase power. So the scott transformer is used in the power system to supply a single phase load in three-phase power without the unbalance of loads. Especially, the scott transformer is used in the AC substation of electric railroad. Two single phase transformers are combined by T-wiring in the scott transformer. So, two single phase voltage is provided by differing $90^{\circ}$ phase in three-phase power. The selection of related equipment and correction of protective relay are not easy from characteristic of the scott transformer when shunt and ground faults occur. PSIM(Power Electronics Simulator) is optimal simulation software in field of the power electronics and provide the simple and convenient user interface. In this paper, electric model of the scott transformer is suggested and the current of the scott transformer in shunt and ground faults is analyzed. Also, the scott transformer model is demonstrated by using PSIM.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.3
• /
• pp.367-372
• /
• 2012

In nuclear plants, UVR (under voltage relay, 27r) of 1E bus, which protected and supplied power to essential loads, to safety trip of reactor and supplied to starting signal of EDG (emergency diesel generators) automatically. therefore UVR tolerances setting and calculation method has been important to nuclear facility. If calculation and tolerances values differ or ignore, may induced power loss and economical loss by protective failure. This paper show results for calculation methods, and whether dependant or independent methods for factors. included whether PT (potential transformer/voltage transformer) tolerance or not adapted, and based on UVR setting method within a difference minimum and maximum of rated voltage to safety operation in nuclear plants.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.25-26
• /
• 2008

A, B 변전소간에 345kV 지중선로 4회선으로 Loop 운전 중 1개의 지중선로에 절연파괴 고장이 발생하였으며, 이때 4개의 지중송전선로가 모두 운전정지 되는 고장이 발생하였다. 고장이 발생한 선로는 정상적으로 보호계전기가 동작하였으나, 그 외 다른 선로의 보호계전기가 오동작하여 원인규명시험을 한 결과 외부고장시 CT 포화로 인해 보호계전기가 자단고장으로 인식하여 동작된 것으로 분석되었다. 본 논문에서는 CT 포화와 관련하여 DC성분, Surge, 2차 부담 등 여러가지 조건에 대하여 고찰함으로서 향후 전력계통의 다양한 고장에 대비하는데 도움이 되기를 기대한다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.5
• /
• pp.667-675
• /
• 2009

Faults can be generated at electric power systems by variety of both certain and uncertain reasons, which may cause harmful effects on electrical apparatuses under operation and stability of electric power system operations, and may also lead to great confusions and inconveniences to individual livings, public works, industrial activities, services, military affairs, etc.. In some cases, intentional inductions of faults are committed for specific purposes, and it is necessary to understand the procedures of fault by some foreign materials. In this paper, compositions and operations of electric power systems, summaries of electrical fault phenomena and fault protection, and restrictions to power system operation were outlined. And the analogies on the procedure of faults from former papers were introduced, and test results that revealed the validity of those analogies were also introduced.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.129-132
• /
• 1990

This paper reports an expert system for coordination of protective relays in the high voltage transmission system. The proposed system consists of five modules and has adopted the frame and production rule representations achieving the efficient data storage and knowledgebases. It has an interface to the fault program PSS/E and has reduced the data retrival time by implementing the local database containg only the minimum information for the process. Different relay parameters and output formats of the setting results can be easily incorporated owing to the rule-based structure. Graphics-based output helps understanding of the process and enhances the practical power.

• KIEE International Transactions on Power Engineering
• /
• v.2A no.4
• /
• pp.153-159
• /
• 2002

Power transformer protective relay should block the tripping during magnetizing inrush and rapidly operate the tripping during internal faults. Recently, the frequency environment of power system has been made more complicated and the quantity of 2nd frequency component in inrush state has been decreased because of the improvement of core steel. And then, traditional approaches will likely be maloperate in the case of magnetizing inrush with low second harmonic component and internal faults with high second harmonic component. This paper proposes a new relaying algorithm to enhance the fault detection sensitivities of conventional techniques by using a fuzzy logic approach. The proposed fuzzy based relaying algorithm consists of flux-differential current derivative curve, harmonic restraint, and percentage differential characteristic curve. The proposed relaying was tested with relaying signals obtained from EMTP simulation package and showed a fast and accurate trip operation.