• 교육녹색환경연구
• /
• 제13권2호
• /
• pp.26-34
• /
• 2014

Recently, a series of massive earthquakes have been occurred northeast Asia and there has also been constant sensible earthquakes in South Korea. Particularly, after diagnosing educational facilities with Sichuan earthquake momentum, remodeling construction of old educational facilities and buildings which were not designed not to resist earthquake are actively underway. Remodeling construction sites, however, are mostly small construction sites which consist of less than 30 full-time laborers, where a number of deaths from a fall occur by improper uses of protective gear. Therefore, to reduce the disaster from a fall caused by inadequate uses of protective gear in domestic small construction sites such as those for remodeling, this study conducts research into ways of decreasing accident rates by suggesting providing and administering protective gear as a national project so that donning protective gear is activated.

• Journal of Radiation Protection and Research
• /
• 제48권1호
• /
• pp.52-57
• /
• 2023

Background: Korea Atomic Energy Research Institute (KAERI) operates several nuclear research facilities licensed by Nuclear Safety and Security Commission (NSSC). The emergency preparedness requirements, GSR Part 7, by International Atomic Energy Agency (IAEA) request protection strategy based on the hazard assessment that is not applied in Korea. Materials and Methods: In developing the protection strategy, it is important to consider an accident scenario and its consequence. KAERI has tried the hazard assessment based on a hypothesis accident scenario for the major nuclear facilities. During the assessment, the safety analysis report of the related facilities was reviewed, the simulation using MELCOR, MACCS2 code was implemented based on a considered accident scenario of each facility, and the international guidance was considered. Results and Discussion: The results of the optimized protective actions were 300 m evacuation and 800 m sheltering for the High-Flux Advanced Neutron Application Reactor (HANARO), the evacuation to radius 50 m, the sheltering 400 m for post-irradiation examination facility (PIEF), 100 m evacuation or sheltering for HANARO fuel fabrication plant (HFFP) facility. Conclusion: The results of the optimized protective actions and its distances for the KAERI facilities for the maximum postulated accidents were considered in establishing the emergency plan and procedures and implementing an emergency exercise for the KAERI facilities.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.275-276
• /
• 2023

This study introduces the current progress of study on the development of protective wall aimed at preventing the spread of ultra-fast fires and ensuring fire safety in industrial facilities.

• Structural Engineering and Mechanics
• /
• 제10권6호
• /
• pp.561-575
• /
• 2000

Microvibration of high technology facilities, such as semiconductor plants and facilities with high precision equipments, due to nearby road and rail traffic has attracted considerable attention recently. In this paper, a preliminary study is conducted for the possible use of various protective systems and their performance for the reduction of microvibration. Simulation results indicate that passive base isolation systems, hybrid base isolation systems, passive floor isolation systems, and hybrid floor isolation systems are quite effective and practical. In particular, the performances of hybrid floor isolation systems are remarkable. Further, passive energy dissipation systems are not effective for the reduction of microvibration. Finally, the protections against both microvibration and earthquake are also investigated and presented.

• Corrosion Science and Technology
• /
• 제6권2호
• /
• pp.62-67
• /
• 2007

Several heavy duty coatings at an every kind industry facilities to various systems currently have been applied review to the many industry fields. Corrosion-protective characteristics in the case of novolac epoxy among them and unsaturated polyester have been applied most widely. epoxy and flake heavy duty coatings are applied for such reason in an every kind facilities(stack, FGD, cooler, chemical tank etc) of a fossil-fuel power plants Cases of the fossil-fuel power plants are exposed to more severe corrosion environment compared with other facilities and It is difficult to display the performance of long-term method at apply to be the partial. Our study shows fluoro-polymer composite coating method to overcome of the limit. The comparison did previous method and heavy duty coating about FGD plants most at a corrosion environment among fossil-fuel power plants. Additionally, other facilities examined different heavy duty method. The design mode of fluoro-polymer composite coating according to an every kind facilities show extensive methods that are characteristic revelation of film(top, middle and primer layer) composition of the paint, film thickness in accordance with a facilities corrosion and the corrosion protective effectiveness to come into being use fluoro-polymer composite with heavy duty paint(epoxy).

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.571-576
• /
• 2009

In terms of protective engineering, there are no noticeable researches regarding covered-positions for smaller units in South Korea. So, standards to maintain and build protective facilities for larger units have been applied in ones for smaller units without any adjustment. The previous study was to calculate penetration depth of the concrete walls because the experiment performed indoor. In this outdoor experiment, velocity of projectile impact as one of the other important factors was considered to prove the validity of 30cm concrete wall thickness as effective protective level of the covered-position. Random effects and extraneous variables which could be occurred in outdoors experiment were controlled with statistical techniques. As a result, velocity of projectile impact was significant variable and the given standard, 30cm thickness of concrete walls was as valid as ever.

• 농촌지도와개발
• /
• 제8권2호
• /
• pp.285-298
• /
• 2001

Rural youth welfare was defined to provide the preventive services as well as the protective and curative services such as education, job training, youth activity, delinquency prevention, etc. for rural youth who live in rural society, including who go out to metropolitan city for study. Based on this concept, the rural youth related facilities and problems were investigated in the area of education, culture and leisure, career, and problematic behavior. The results were identified that the efforts of government and rural related institutions were in sufficient to establish and improve the facilities for rural youth, and the gap between rural and urban youth facilities was extended increasingly, in spite of seriousness of those rural youth problems. Some of policies and programs were proposed in order to improve rural youth welfare; 1) To establish at least one activity facility in every Eup ; 2) To convert the public culture facilities such as museums, fine art museums, exhibition facilities, etc. into the culture and art facilities for rural youth; 3) To establish rural youth job information center in the agricultural technology and extension center; 4) To convert school to rural youth education and cultural center; 5) To establish the comprehensive welfare facilities for rural youth in metropolitan city.

• Applied Microscopy
• /
• 제48권4호
• /
• pp.122-125
• /
• 2018

The focused ion beam (FIB) method is widely used to prepare specimens for observation by transmission electron microscopy (TEM), which offers a wide variety of imaging and analytical techniques. TEM has played a significant role in material investigation. However, the FIB method induces amorphization due to bombardment with the high-energy gallium ($Ga^+$) ion beam. To solve this problem, electron beam induced deposition (EBID) is used to form a protective layer to prevent damage to the specimen surface. In this study, we introduce an optimized TEM specimen preparation procedure by comparing the EBID of carbon and tungsten as protective layers in FIB. The selection of appropriate EBID conditions for preparing specimens for TEM analysis is described in detail.

• 임상간호연구
• /
• 제20권2호
• /
• pp.177-188
• /
• 2014

Purpose: This study was conducted to identify factors influencing endoscopy nurses' protective behavior against radiation exposure. Methods: Data were collected using self-report questionnaires from 122 endoscopy nurses in 21 hospitals located in Seoul, Gyeonggi province and six metropolitan cities in Korea. Collected data were analyzed using SPSS 18.0 program and included multiple regression analysis. Results: 1) There were significant relationships between protective behavior and protective environment (r=.74, p<.001), number of education sessions on radiation protection (r=.32, p<.001), number of protective devices (r=.28, p=.002), number of fellow nurses (r=.27, p=.003), and protective attitude (r=.18, p=.048). 2) Protective environment (${\beta}=0.79$, p<.001), type of hospital foundation (${\beta}=0.18$, p=.011) and marital status (${\beta}=-0.13$, p=.040) significantly predicted endoscopy nurses' protective behavior against radiation exposure (adjusted R square=.58, p<.001). The most powerful predictor for protective behavior against radiation exposure was a protective environment. Conclusion: Effective protective behavior of endoscopy nurses from radiation exposure requires improvement in their protective environment. Hospital administrators and managers should make efforts to increase protective facilities in endoscopy departments and provide endoscopy nurses with regular education on radiation protection.

• 전기학회논문지
• /
• 제60권8호
• /
• pp.1485-1491
• /
• 2011

This paper deals with the technical problems for the protection devices, by simulating test facilities of protection coordination for Photovoltaic systems. In order to analyze the operation characteristics for the protection devices in the case that the Photovoltaic systems with bi-directional power supply are located in the feeder, this paper proposes the test facilities composed of model distribution system, protection device and model Photovoltaic systems. By performing the simulation for operation characteristics for the protection devices based on the test facilities, this paper presents the malfunction mechanism for the protection devices. The test results show that this paper is practical and effective for the technical guideline for the Photovoltaic systems.