• 한국재난정보학회 논문집
• /
• 제18권3호
• /
• pp.507-519
• /
• 2022

연구목적: 소규모 사업장에서 중대재해처벌법의 안전보건 확보의무를 준수하는 효율적이고 실무적인 방안을 제시하고자 한다. 연구방법: 문헌연구와 선행연구를 바탕으로 안전보건경영시스템과의 연계, 프로세스 접근방법 등을 활용한 중대재해처벌법 준수방안을 검토하였다. 연구결과: 안전보건경영시스템을 충실히 이행하면 중대재해처벌법의 안전보건 확보의무를 준수할 수 있음을 확인하였다. 그리고 안전보건 확보의무를 이행하고 점검하는 방법론을 제시하였다. 결론: 프로세스 접근방법과 이행점검 체크리스트를 적극 활용하여 안전보건경영시스템을 운영하면 중대재해처벌법 준수는 물론 안전보건경영시스템의 지속적 개선이 가능할 것으로 판단된다.

• 한국안전학회지
• /
• 제11권1호
• /
• pp.108-120
• /
• 1996

It is a problems in industrial accidents that the knowledge for industrial accidents is obtained by experience, not by experiment. This experiential knowledge is obtained by Investigating accident cases and utilizing those for safety education. Therefore, in this paper, the situation about the serious accident of construction is analyzed by occupation, a kind of construction, time group, season, type of accident, and accidental cause. And the mutual · relations of these factors are studied. The most frequent type of the serious accidents of construction Is the falling accident. It happenes most frequently at apartment construction among kinds of construction and to structural worker, finishing worker, normal worker in order among occupations. And it is found that the most critical causes of the falling accident are the imperfection of safety facilities and unwearing of protection equipments, so a number of accidents can be reduced by the expansion of safety facilities and wearing of protection equipments absolutely. The counterplan of prohibition of accidents and the direction of government policy are presented by a series of nalyses for accident cases.

• Journal of Radiation Protection and Research
• /
• 제37권4호
• /
• pp.177-180
• /
• 2012

Industrial radiography practice is usually employed in public domain. Over the years there are several radiation accidents reported in this practice. The accidents often result in severe or fatal exposures to occupational workers and public. The number of radiation accidents is also significant when compared with other industrial accidents. This paper describes practice specific training as one of the measures to the improve radiation safety and reduce the accidents. The efforts by International Atomic Energy Agency (IAEA) to disseminate information and to improve the radiation safety status in industrial radiography are also discussed.

• 해양환경안전학회지
• /
• 제29권2호
• /
• pp.118-126
• /
• 2023

해양을 이용하려는 수요자 증가에 따라, 해양공간을 합리적으로 배분하기 위해 해양공간계획(Marine Spatial Planning)제도가 도입되었다. 이 중 어업활동보호구역은 수산자원보호 등 어업활동 보호를 위해 지정되었다. 그러나, 어업활동보호구역을 주로 항해하는 어선은 우리나라에서 발생하는 해양사고의 약 70 %를 차지할 정도로 위험에 노출되어 관리가 필요하다. 본 연구의 목적은 어업활동보호구역 내 어선 통항 안전 확보를 위해 어업활동보호구역과 항만·항행구역에서 발생하는 해양사고를 분석하는 것이다. 이를 위해 해양용도구역의 교통량을 조사하고 선종별, 사고 유형별, 톤수별, 사고원인별, 인명피해별로 해양사고를 조사하였다. 분석 결과 각 유형별 단위 면적당 해양사고는 대부분 항만·항행구역에서 더 많이 발생하였으나 전체적으로 발생한 해양사고는 어업활동보호구역이 높았다. 특히 인명사고가 많이 발생하여 통항 안전관리가 필요한 것으로 식별되었다.

• International Journal of Safety
• /
• 제10권1호
• /
• pp.10-15
• /
• 2011

In Japan, protective measures to reduce falls from scaffolds have been strictly applied within industry safety guidelines, and such measures have significantly decreased fatal accidents due to falls from scaffolds. However, the rate of fatal accidents from falls is still high in the construction industries. In order to examine further countermeasures to reduce such falls, the Japan Ministry of Health, Labour and Welfare established a committee in our institute. That committee$\acute{i}$s work experimentally confirmed the effectiveness of using plastic sheets as a covering around scaffolds to protect against falls of construction materials (a method widely used in Japan). However, the workers fell from the space between the work platform and the plastic sheets very occasionally. Based on those results, the plastic sheets were improved for fall protection from the space, and the effect of the improved sheets was confirmed experimentally.

• 한국안전학회지
• /
• 제33권6호
• /
• pp.8-14
• /
• 2018

Recently, serious problems occurred such as insecticide eggs, sanitary pads with carcinogens, radon(Rn) emitting beds in domestic. It had not been establishing the inspection system to evaluate safety and human harmfulness before occurring real accidents. This research was conducted to test preliminary experimental inspection for consideration of safety insensibility. The influence of corrosion of metals and plants was studied through aerosol type spraying of agricultural pesticide products coming into the market. These products contain primary three insecticide ingredients(Flufenoxuron, Etoxazole, Fipronil) in recent accidents. Visual examination, SEM-EDS and optical microscope were used for the analysis for corrosion effect. Results show that a lot of ingredients contain in the crop protection products, and various type of corrosion exist in the surface of metals and plants. Therefore, it is necessary to provide health warning and accurate range of use for crop protection products containing insecticide ingredients.

• 대한인간공학회지
• /
• 제20권3호
• /
• pp.61-76
• /
• 2001

This study is for analyzing the explosion accidents in the tunnels, roads, subways, streets and various kinds of building construction area with the use of Fault Tree Analysis(FTA). based on the police Department and Guns & Explosives Safety Technology Association's researching materials. the explosion accidents have been investigated and analyzed between 1988 and 1977. As the result, we can find out that the majority of the explosion accidents in Korea is the accidents by flown stones(45.7%), like in Japan. So we make the research chart which is needed for analyzing the explosion accident, and then analyze these accidents systematically. using the investigation codes of the industrial accidents. After that, the FTA was performed on the accidents by flown stones. They result fromm non-observance of the safety rules, and lees knowledge of the safety and so on. Moreover several causes are combined and then the accidents are apt to happen. So according to the results of this study, for the protection of the explosion accidents, the specialized safety education is badly needed and the enough investigation of the places before the work along with the management for safety in working must be planned.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제17권2호
• /
• pp.7-16
• /
• 2011

The death toll of the elderly by accidents in 2007 takes 6.5% of total death toll. The lost income from this is estimated to be 17 trillion and 511 billion won. According to CISS of Korea Consumer Protection Board, the number of safety related accidents of the elderly at home in 2006 was 486 cases in 2006 and has gradually increased every year. This thesis created 115 guidelines at 14 spaces as facility evaluation index evaluating the aging friendliness of the facility and safety related accidents generated at elderly resident welfare facility, examined influence variables of safety related accidents with 191 elderly including demographic variable, physical skill variable, social psychological variable and facility environmental variables, and then verified relevance between safety accidents and each influence variable. As a result, it was verified through ANOVA test of SAS Package Program and $x^2$- test that facility environmental variable would be closely related to the accident. In this regard, this study newly proposes the facility standards of aging friendly facility by supplementing them with contents and guidelines of facility evaluation table as ways to reduce safety related facility of the elderly.

• 한국산업융합학회 논문집
• /
• 제27권3호
• /
• pp.591-599
• /
• 2024

This paper presents the configuration and characteristic analysis of the protection system to improve the safety of the building integrated photovoltaic(BIPV) system. BIPV is a solar power system installed in buildings. Since the BIPV system is installed in buildings, there is a high risk of electric shock and fire accidents. Therefore, in order to improve the safety of BIPV, a protective system is required to block or quickly detect risk factors. In this paper, as a protection system to improve the safety of the BIPV system, it is composed of a rapid shutdown (RSD) that can quickly separate the PV system to prevent fire and electric shock accidents and a system to detect Arc faults that cause PV system fires. RSD and Arc Fault Detector analyzed the operating characteristics according to each condition and confirmed that the safety of the BIPV system can be improved through this.

• 건설안전기술
• /
• 통권36호
• /
• pp.73-81
• /
• 2006

Construction fall accidents have been investigated by many researchers. Construction workers are prone to fall when elevations of the construction site is high. And falls are the most fatal accidents: it can be directly linked to the death. Construction fall accidents might be reduced by predetermining several areas which are highly probable to have fall accidents and by controlling such areas until the completion of the building construction. In this paper, a fall prevention system is suggested which can identify the areas where the focus on fall protection is perhaps most needed from the process characteristics. Main methodologies for this research are summarized as follows: 1. A data base on elements and types of falls is constructed from the data analysis of last 10 years fall accidents history. 2. Guideline is derived by identifying the highly probable areas of fall accidents with respect to the specific construction process. 3. Developed system is verified by applying the system to construction sites. 4. Finally a fall prevention system is suggested by utilizing the fall accidents data.