• 복식문화연구
• /
• 제6권4호
• /
• pp.238-246
• /
• 1998

According to several pilot tests, petite women have their own body proportion which is not simply an overall diminutive reflection of the proportion of Misses sizes. Apparel manufacturers and pattern companies do not consider racial differences nor do they consider petite women's own specific body proportions in their size categories to produce petite garments. The primary objectives of this study was to describe the petite women's body proportions especially the differences between Asian and Caucasian petite women and to compare their body proportions to the average body figure. A physical body measurement chart was developed and revised through a pretest. Sixty subjects, thirty for each group of Asian and Caucasian. They were landmarked using an anthropometric instrument and photographed using the method of somatography for analysis of body proportions. Data were analyzed by t-test for a description of the petite subject's body proportion. The results of this study indicated that the Caucasian subjects had generally a longer lower torso than tehAian subjects in their body proportions. both subject groups had differnt body proportions from the aerage body figure.

• Journal of the Korean Data and Information Science Society
• /
• 제23권2호
• /
• pp.411-417
• /
• 2012

In this paper, we consider the estimation of multinomial proportions. Multinomial distribution is the most important multivaritate distribution. Estimation of multinomial parameters for multinomial distribution is widely applicable to many practical research areas including genetics. We investigated the properties of several frequency substitution estimates and derived the maximum likelihood estimate of multinomial proportions of Hardy Weinberg proportions. Phenotype and genotype frequencies of allele are used to the estimation of multinomial proportions. These estimates are then analyzed via numerical data. Small sample Monte Carlo simulation is conducted to compare considered estimates of multinomial proportions.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권6호
• /
• pp.617-625
• /
• 1995

Distribution of wholesale carcass cuts and tissues was studied in Omani Dhofari bulls and steers raised under intensive management and slaughtered over a range of 110 to 210 kg body weight. The fore quarter of Dhofari cattle carcasses was heavier than the hind quarter with the chuck being the heaviest cut in the half carcass followed by the round whereas the flank was the lightest cut. Proportions of the fore quarter and its cuts increased whereas that of the hind quarter and its cuts decreased with increasing carcass weight. The fore quarter contained higher proportions of carcass tissues especially intermuscular fat than the hind quarter. The chuck and round contained the highest proportions of lean and bone and the flank the least. There was a general trend of increasing proportions of fat and decreasing proportions of lean and bone in carcass cuts and fore and hind quarters with increasing slaughter weight and age. As % total body fat (TBF), total carcass fat (TCF) increased whereas total non-carcass fat (TNCF) decreased. The largest proportion of TBF was deposited in the intermuscular site. Among the TNCF depots, the kidney and omental contributed the highest proportions whereas the pelvic and channel were the lowest. Proportions of M. rhomboideus and M. splenius increased in the half carcass whereas that of M. semitendinosus decreased as the cattle increased in size. The axial skeleton contributed 47.4-51.1, the fore limb 21.6-22.6 and the hind limb 23.9-26.2% of the total carcass bone. Proportions of axial skeleton increased whereas that of fore and hind limbs decreased with increasing slaughter weight and age. There were no major effects of castration on the distribution of weight of carcass cuts or carcass tissues. Steers had higher total body fat at 160 kg body weight and higher proportions of mesenteric, scrotal, pelvic, kidney and total non-carcass fat at 210 kg weight than bulls. As % of total body fat, steers fad significantly higher kidney and total non-carcass fat. There was little effects of castration on proportions of dimensions of individual muscles or bones.

• Computers and Concrete
• /
• 제10권6호
• /
• pp.587-607
• /
• 2012

The purpose of this research is to propose a design technique of concrete mix proportions satisfying service life through genetic algorithm (GA) and neural network (NN). For this, thirty mix proportions and the related diffusion coefficients in high performance concrete are analyzed and fitness function for diffusion coefficient is obtained considering mix components like w/b (water to binder ratio), cement content, mineral admixture (slag, flay ash and silica fume) content, sand and coarse aggregate content. Through averaging the results of 10 times GA simulations, relative errors to the previous data decrease lower than 5.0% and the simulated mix proportions are verified with the experimental results. Assuming the durability design parameters, intended diffusion coefficient for intended service life is derived and mix proportions satisfying the service life are obtained. Among the mix proportions, the most optimized case which satisfies required concrete strength and the lowest cost is selected through GA algorithm. The proposed technique would be improved with the enhancement of comprehensive data set including wider the range of diffusion coefficients.

• Communications for Statistical Applications and Methods
• /
• 제9권2호
• /
• pp.389-399
• /
• 2002

In order to examine whether the difference between two point estimates of population proportions is statistically significant, data analysts use two techniques. The first is to explore the overlap between two associated confidence intervals. Second method is to test the significance which is introduced at most statistical textbooks under the common assumptions of consistency, asymptotic normality, and asymptotic independence of the estimates. Under the null hypothesis which is two population proportions are equal, the pooled estimator of population proportion is preferred as a point estimator since two independent random samples are considered to be collected from one population. Hence as an alternative method, we could obtain another confidence interval of the difference of the population proportions with using the pooled estimate. We conclude that, among three methods, the overlapped method is under-estimated, and the difference of the population proportions method is over-estimated on the basis of the proposed method.

• 대한인간공학회지
• /
• 제22권1호
• /
• pp.17-29
• /
• 2003

This study was initiated to develop a methodology for devising Korean virtual models for apparel shopping at internet shopping site. The data base for this study was the Korean National Anthropometric Survey in 1997. The subjects were 493 women and 626 men in 20's. The researchers also measured 88 males and females in age 20's to suggest back and front depth proportions which are not available from the survey. The virtual models' figure types were classified by the heights, drop value and bust(chest) girth. It was evaluated whether it is needed to separate figure type with bust(chest) girth. The body sizes of virtual models were suggested for side view model and front view model in 13cm height. Four female virtual models were suggested for front view and side view. Eight male virtual models were suggested for front view and side view. Each virtual model's height, breadth and depth proportions were calculated. Shoulder breadth. Bust(chest) breadth, waist breadth, hip breadth and proportions were calculated for front view model. The bust(chest) depth, waist depth, abdomen depth, hip depth and proportions were calculated for side view model. Height proportions were suggested for female and male virtual models.

• 대한인간공학회지
• /
• 제10권2호
• /
• pp.23-30
• /
• 1991

This paper interprets the Seongho/s ergonomec philosophy in terms of contemporary view of ergonomics, which appears in 'ichuck' of Seongho Sasul written in 1760's. The content of Jichuck is largely composed of three parts such as the proportions of human body dimensions, numerical examples, and the principles and method of clothes edsign. Some parts of human body proportions are tested and compared with Woodson's criteria and anthropometric data suggested by Korea Standards Research Institute in 1986. Concludingly, it is revealed that the ancient Seongho's ergonomic philosophy is regarded as apporopriate, and 'saji(4 fingers width)' is more reasonable for criterion of human body proportions.

• Journal of the Korean Statistical Society
• /
• 제36권3호
• /
• pp.397-410
• /
• 2007

For the two groups data from multivariate binomial distribution, we consider a bootstrap approach to inferring the simultaneous confidence level and its standard error of a collection of the dependent confidence intervals for the difference of proportions with an experimentwise error rate at the a level are presented. The bootstrap method is used to estimate the simultaneous confidence probability for the difference of proportions.

• Journal of the Korean Data and Information Science Society
• /
• 제25권4호
• /
• pp.941-949
• /
• 2014

Unit level logistic regression model with mixed effects has been used for estimating small area proportions, which treats the spatial effects as random effects and assumes linearity between the logistic link and the covariates. However, when the functional form of the relationship between the logistic link and the covariates is not linear, it may lead to biased estimators of the small area proportions. In this paper, we relax the linearity assumption and propose two types of kernel-based logistic regression models for estimating small area proportions. We also demonstrate the efficiency of our propose models using simulated data and real data.

• Journal of the Korean Data and Information Science Society
• /
• 제23권3호
• /
• pp.587-593
• /
• 2012

We study Bayesian estimates for finite population proportions in multinomial problems. To do this, we consider a three-stage hierarchical Bayesian model. For prior, we use Dirichlet density to model each cell probability in each cluster. Our method does not require complicated computation such as Metropolis-Hastings algorithm to draw samples from each density of parameters. We draw samples using Gibbs sampler with grid method. We apply this algorithm to a couple of simulation data under three scenarios and we estimate the finite population proportions using two kinds of approaches We compare results with the point estimates of finite population proportions and their standard deviations. Finally, we check the consistency of computation using differen samples drawn from distinct iterates.