• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.1
• /
• pp.117-130
• /
• 2017

Bicycles are leading to serious accidents in the event of a side collision, and it is very important to prevent accidents in advance because it is difficult to actively deal with them in a dangerous situation. As a part of the bicycle safety driving support technology, this study establishes bicycle accidents dangerous zone based on bicycle accident data and road property information of digital map nationwide and provides timely safety information to cyclists. The point selected by using actual accident data was called 'dangerous zone', and the potential accident occurrence point generated by modeling based on this 'dangerous zone' was called 'logical dangerous zone'. As a result of the research on the Designation of Logical Bicycle Accident Dangerous Zone, the regional specificity of the bicycle accident points across the nation was generalized to the form of the logical dangerous zone through the network data.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.15-24
• /
• 2000

The dielectric relaxation of high-dielectric capacitors could be understood as a dynamic property of the capacitor in the time domain, which is regarded as a primarily important charge loss mechanism during the refresh time of DRAMs. Therefore, the equivalent circuit of the dielectric relaxation of the high-dielectric capacitor is essentially required to investigate its effects on DRAM. Nevertheless, There is not any theoretical method which is generally applied to realize the equivalent circuit of the dielectric relaxation. Recently, we have developed a novel procedure for the circuit modeling of the dielectric relaxation of high-dielectric capacitor utilizing the frequency domain. This procedure is a general method based on theoretical approach. We have also verified the feasibility of this procedure through experimental process. Finally, we successfully investigated the effect of dielectric relaxation on DRAM operation with the obtained equivalent circuit through this new method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1199-1204
• /
• 2011

The capability to bilaterally telemanipulate soft-tissues for medical applications could increase the quality of telemanipulation systems. Since most soft-tissue manipulation tasks include constrained motion interacting with an unknown and dynamic bioenvironment through contact, bilateral telemanipulation raises problems due to stability and transparency issues. It is well understood that knowledge of environments plays an important role in pursuing transparent telemanipulation and achieving telepresence, and in particular, online estimation of environmental parameters with an explicit environment model can improve these systems' performance. In this study, a continuum mechanics-based environment model with an online environmental property estimation algorithm and an adaptive telemanipulation control scheme is proposed. The proposed method can improve the telemanipulation performance in terms of stability and transparency and can offer valuable information (e.g., elastic modulus of soft tissues) pertaining to diagnostic examinations.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.5
• /
• pp.16-23
• /
• 2011

Muzzle flash based on gunnery is the target that has huge energy. So, gunnery target in a long range over xx km is distinguishable in the IR(infrared) images, on the other hand, is not distinguishable in the CCD images. In this paper, we propose the classification method of gunnery targets in a infrared images and in a long range. The energy from gunnery have an effect on varous pixel values in infrared images as a property of infrared image sensor, distance, and atmosphere, etc. For this reason, it is difficult to classify gunnery targets using pixel values in infrared images. In proposed method, we take the profile of pixel values using high performance infrared sensor, and classify gunnery targets using modeling GMM and shape of profile. we experiment on the proposed method with infrared images in the ground and aviation. In experimental result, the proposed method provides about 93% classification rate.

• Journal of Biomedical Engineering Research
• /
• v.19 no.5
• /
• pp.495-502
• /
• 1998

A mathematical model of viscoelasticity on the material property of human pharyngeal tissue utilizing Y.C. Fung's Quasi-linear viscoelastic theory is proposed based on cyclic load, stress relaxation, incremental load, and uniaxial tensile load tests. The material properties are characterized and compared with other biological materials' results. The mathematical model is proposed by combining two characteristic functions determined from the stress relaxation and uniaxial tensile load tests. The reduced stress relaxation function G(t) and elastic response function S(t) are obtained from stress relaxation test and uniaxial tensile load test results respectively. Then the model describing stress-time history of the tissue is implemented utilizing two functions. The proposed model is evaluated and validated by comparing the model's cyclic behaviour with experimental results. The model data could be utilized as an important information for constructing 3-dimensional biomechanical model of human pharynx using FEM(Finite Element Method).

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.535-540
• /
• 2006

The relationship between the observable noise model and the satellite elevation angle can be modeled quite well by an exponential function.[Jin, 1996] Noise size and dependence on the elevation angle are, however, different for each observation and receiver type. Therefore, the coefficient determination of this model is an issue, and various methods including PR-CP, single difference, and time difference have been suggested. The limitations of them are difficulty to model the carrier phase noise and to eliminate bias. To overcome these disadvantages for using Jin's model, we suggest zero baseline double difference (DD) and noise sorting algorithm. Data DD technique in zero baseline is useful to eliminate all the troublesome GPS biases, and the remaining error is the sum of GPS measurement noises from two satellites. These DD residuals for hours should be sorted by the combination of satellite elevation angles, and then variance value of the residual for each combination can be estimated. Using these values, we construct an over-determined linear equation whose solution is a set of noise variance for each satellite elevation angle. With 24hr Trimble 4000ssi data, we easily worked out the coefficients of the noise model not only for pseudorange but also for carrier phase. We estimated the standard deviation of the measurement DD using our model, and plotted 1 and 3 sigma lines for every epoch to verify the representation of the residual error. 63.3% of pseudorange residual and 65.9% of phase error did not exceed the 1 sigma lines. Additionally, 99.2% and 99.5% of them lied within 3sigma line. These figures prove that the Gaussian property of measurement noise, and that the suggested model by our algorithm corresponds to the observable noise information.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.1
• /
• pp.41-50
• /
• 2008

Recent progress in state-of-the-art geospatial information technologies such as digital mapping, LiDAR(Light Detection And Ranging), and high-resolution satellite imagery provides various data sources fer Digital Elevation Model(DEM). DEMs are major source to extract elements of the hydrological terrain property that are necessary for efficient watershed management. Especially, watersheds extracted from DEM are important geospatial database to identify physical boundaries that are utilized in water resource management plan including water environmental survey, pollutant investigation, polluted/wasteload/pollution load allocation estimation, and water quality modeling. Most of the previous studies related with watershed extraction using DEM are mainly focused on the hydrological elements analysis and preprocessing without considering grid size of the DEMs. This study aims to analyze accuracy of the watersheds extracted from DEMs with various grid sizes generated by LiDAR data and digital map, and appropriate preprocessing methods.

• KIISE Transactions on Computing Practices
• /
• v.21 no.9
• /
• pp.604-609
• /
• 2015

The use of Operating System(OS) virtualization is increasing as it provides many useful features such as efficient use of hardware(HW), easy system migration, and isolation between virtual spaces which prevents errors effecting each other. Recent development in HW has made it possible to use OS virtualization in embedded systems. However, implementing OS virtualization means that a multiple number of schedulers are layered in a system, rendering it difficult to analyze the schedulability of the system and errors are easily produced. Errors in safety critical embedded systems can cause serious damage to life and property; thus, the hierarchical schedulability must be verified. In this paper, we propose a framework which supports formal modeling and verification of hierarchical scheduling systems with UPPAAL.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.195-195
• /
• 2016

Kon - Ha Thanh River basin is the largest and the most important river basin in Binh Dinh, a province in the South Central Coast of Vietnam. In the lower rivers, frequent flooding and inundation caused by heavy rains, upstream flood and or uncontrolled flood released from upstream reservoirs, are very serious, causing damage to agriculture, socio-economic activity, human livelihood, property and lives. The damage is expected to increase in the future as a result of climate change. An advanced flood warning system could provide achievable non-structural measures for reducing such damages. In this study, we applied a modelling system which intergrates a 1-D river flow model and a 2-D surface flow model for simulating hydrodynamic flows in the river system and floodplain inundation. In the model, exchange of flows between the river and surface floodplain is calculated through established links, which determine the overflow from river nodes to surface grids or vice versa. These occur due to overtopping or failure of the levee when water height surpasses levee height. A GIS based comprehensive raster database of different spatial data layers was prepared and used in the model that incorporated detailed information about urban terrain features like embankments, roads, bridges, culverts, etc. in the simulation. The model calibration and validation were made using observed data in some gauging stations and flood extents in the floodplain. This research serves as an example how advanced modelling combined with GIS data can be used to support the development of efficient strategies for flood emergency and evacuation but also for designing flood mitigation measures.

• Journal of the Korea Society for Simulation
• /
• v.18 no.1
• /
• pp.63-70
• /
• 2009

This project presents a classification methodology for malicious codes in Windows OS (Operating System) environment, develops a test classification system. Thousands of malicious codes are brought in every day. In a result, classification system is needed to analyzers for supporting information which newly brought malicious codes are a new species or a variety. This system provides the similarity for analyzers to judge how much a new species or a variety is different to the known malicious code. It provides to save time and effort, to less a faulty analysis. This research includes the design of classification system and test system. We classify the malicious codes to 9 groups and then 9 groups divide the clusters according to the each property. This system provides the similarity for analyzers to save time and effort. It is used prospect system of malicious code in the future.