• 한국의류학회지
• /
• 제23권1호
• /
• pp.120-127
• /
• 1999

The purpose of the study is to mae experimental whether the required property quantity and marker efficiency has variation of marking based on theoretical background of marking using th function of computer marking system. To investigate that variation of marking effect the required property quantity and marker efficiency as the following is tried to solve giving separation to item width of property cutting line detail which is believed to influence the required property quantity and marker efficiency. How to make experiment as follows separating in order marker of 1082 styles of women's ready-made clothes of with basic design(jacket. pants. skirt, two-piece). Then the data were subjected to analysis of variance and Duncan's multiple range test. The result of this studying as follows 1. In marker of women's jacket and pants the required property quantity shows lower when it is each item than when it is two-pice,. 2. In marker of women's pants marker efficiency shows the highest level when width is 132cm and it shows the lowest level when width is 112cm. 3. In width 152cm of skirt marker it has cutting lines shows lower the required property quantity than it doesn't have. 4. In marker of women's pants it has details shows more high marker efficiency than it doesn't have.

• 한국주조공학회지
• /
• 제31권4호
• /
• pp.198-204
• /
• 2011

The present study was aimed to investigate the dependence of fatigue property on microporosity variation of low-pressure die-cast (LPDC) A356 alloy. The fatigue property of A356 alloy was evaluated through high cycle fatigue test, and the microporosity-terms used were the fractographic porosity measured from SEM observation on fractured surface and the volumetric porosity obtained through the density measurement using Archimedes's principle. The number of cycles to failure of A356 alloys depends obviously upon the variation of fractographic porosity, and can describe in terms of the defect susceptibility which depends on the microporosity variation at a given value of stress amplitude. The modified Basquin's equation was suggested through the combination of microporosity variation and static maximum tensile stress to fatigue strength coefficient. Using modified Basquin's equation, it could suggest that the maximum values of fatigue strength coefficient and exponent achievable in defect-free condition of A356 alloy are 265 MPa, -0.07, respectively.

• Communications for Statistical Applications and Methods
• /
• 제31권4호
• /
• pp.459-466
• /
• 2024

Multivariate regular variation is a popular framework of multivariate extreme value analysis. However, a suitable parametric model needs to be introduced for efficient estimation of its spectral measure. In such a view, elliptical distributions have been employed for deriving such models. On the other hand, the second order behavior of multivariate regular variation has to be specified for investigating the property of the estimator. This paper derives such a behavior by imposing a widely adopted second order regular variation condition on the representation of elliptical distributions. As result, the second order variation for the convergence to spectral measure is characterized by a signed measure with a regular varying index. Moreover, it leads to the asymptotic bias of the estimator. For demonstration, multivariate t-distribution is considered.

• 한국전산유체공학회지
• /
• 제12권4호
• /
• pp.74-84
• /
• 2007

The flowfield characteristics in a straight rectangular channel have been investigated through a numerical model to analyze the regenerative cooling system that is used in rocket engine cooling. The supercritical hydrogen coolant introduces strong property variations that have a major influence on the developing flow and heat transfer characteristics. Of particular interest is the improved understanding of the physical characteristics of such flows through parametric studies. The approach used is a numerical solution of the full Navier-Stokes equations in the three dimensional form including the arbitrary equation of state and property variations. The present study compares constant and variable property solutions for both laminar and turbulent flow. For laminar flow, the variation of aspect ratio is examined, while for turbulent flow, the effects of variation of channel length and Reynolds number are discussed.

• Korean Journal of Mathematics
• /
• 제24권1호
• /
• pp.1-13
• /
• 2016

This paper shows that the solutions to the perturbed functional dierential system $$y^{\prime}=f(t,y)+{\int_{t_0}^{t}}g(s,y(s),Ty(s))ds$$ have uniformly Lipschitz stability and asymptotic property. To sRhow these properties, we impose conditions on the perturbed part ${\int_{t_0}^{t}}g(s,y(s),Ty(s))ds$ and the fundamental matrix of the unperturbed system $y^{\prime}=f(t,y)$.

• 한국지반공학회논문집
• /
• 제33권4호
• /
• pp.17-24
• /
• 2017

지진과 같은 외부 하중하에서 CFRD 거동은 사력존의 전단파 속도(또는 전단 탄성계수)분포에 큰 영향을 받는다. 일반적으로 사력존의 전단파 속도 분포는 주상도의 형태로 표면파 시험과 같은 비파괴 시험에 의해 결정될 수 있다. 이때 한정된 수의 실험에서 결정된 전단파 속도 주상도에는 불확실성이 존재하며, 이러한 불확실성은 사력존에 존재하는 물성치 공간 변동성에 의해 발생하게 된다. 내진 해석과 같은 다양한 해석에서 물성치 변동성에 의해 발생할 수 있는 해석 결과의 불확실성은 신뢰성 기반 해석을 통해 고려될 수 있다. 신뢰성 기반해석에서는 재료 물성치의 변동계수 결정을 통해 이러한 불확실성을 해석에 반영한다. 본 연구에서는 국내 CFRD 사력존을 위한 전단파 속도변동계수를 결정하였다. 이를 위해 국내 CFRD 사력존에서 결정된 전단파 속도 주상도들과 하모닉 웨이브릿 해석에 기반한 기법을 사용하여 국내 CFRD 사력존에 존재 가능한 600개의 전단파 속도 주상도를 생성하고 이를 이용하여 사력존 전단파 속도 분포의 깊이별 변동계수를 결정하였다.

• 한국재료학회지
• /
• 제14권9호
• /
• pp.659-663
• /
• 2004

Magnetite was prepared by wet method and oil-based magnetic fluid also was prepared by its magnetite. Ahead of making magnetite, we investigated the variation of physical properties for changing $Fe^{3+}/Fe^{2+}$. Through the variation of the process mixing time, pH, magnetite content, we made magnetic fluid of magnetite. We examined the magnetic and frequency property by a toroidal mold. In result $Fe^{3+}/Fe^{2+}=1.2$, over the minute mixing time property of magnetite, Ms was 61.98 emu/g. Moreover, the B-H loop result indicated that the magnetic fluid followed paramagnetic behavior.

• Nuclear Engineering and Technology
• /
• 제46권5호
• /
• pp.605-618
• /
• 2014

The effects of variability of the mechanical properties of lead rubber bearings on the response of a seismic isolation system are investigated. Material variability in manufacturing, aging, and operation temperature is assumed, and two variation models of an isolation system are considered. To evaluate the effect of ground motion characteristics on the response, 27 earthquake record sets with different peak A/V ratios were selected, and three components of ground motions were used for a seismic response analysis. The response in an isolation system and a superstructure increases significantly for ground motions with low A/V ratios. The variation in the mechanical properties of isolators results in a significant influence on the shear strains of the isolators and the acceleration response of the superstructure. The variation provisions in the ASCE-4 are reasonable, but more strict variation limits should be given to isolation systems subjected to ground motions having low A/V ratios. For application of seismic isolation systems to safety-related nuclear structures, the variation in the material and mechanical properties of the isolation system should be properly controlled during the manufacturing and aging processes. In addition, special consideration should be given to minimize the accidental torsion caused by the dissimilarity in the stiffness variations of the isolators.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.214-215
• /
• 2007

Int this paper, we studied the analysis on long-term durability and output power characteristics of PV modules by variation on local thermal property. Using 5 modules(80W), we measured the maximum output power change during the test period. And the optical transmittance of glass was compared with PV module's maximum power fluctuation. The external environment change effected contamination on the entire or local surface of module. This caused the local temperature variation of each solar cell on PV module. The specific analysis is shown in the following paper.

• 대한수학회보
• /
• 제38권1호
• /
• pp.101-111
• /
• 2001

We investigate the property of h-stability, which is an important extension of the notions of exponential stability and uniform Lipschitz stability in variation for nonlinear Volterra difference systems.