• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.496-498
• /
• 2005

This paper presents intelligent digital redesign method of global approach for hybrid state space fuzzy-model-based controllers. For effectiveness and stabilization of continuous-time uncertain nonlinear systems under discrete-time controller, Takagi-Sugeno(TS) fuzzy model is used to represent the complex system. And global approach design problems viewed as a convex optimization problem that we minimize the error of the norm bounds between nonlinearly interpolated linear operators to be matched. Also by using the power series, we analyzed nonlinear system's uncertain parts more precisely. When a sampling period is sufficiently small, the conversion of a continuous-time structured uncertain nonlinear system to an equivalent discrete-time system have proper reason. Sufficiently conditions for the global state-matching of the digitally controlled system are formulated in terms of linear matrix inequalities (LMIs).

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.508-515
• /
• 2003

There are various methods to assess to company's outcome. Among them, the customers satisfaction, which is assessed by customers, is the most important. If the customers satisfaction is measured by the CSI based on the proper reliability and validity, you can apply the result for various marketing methods. Therefore, this study develops a model to assess CSI for an industry, specifically, local automotive industry based on the SEM that is already proven valid through assessing models such as ACSI, KCSI and NCSI. Moreover, this research can be utilized for marketing strategy helping customers to decide as an AHP model, one of the decision making method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.161-167
• /
• 1992

Centrifuge model tests were performed to find the capacity and the failure mechanism of reinforced earth retaining wall subjected to the failure due to breakage of reinforcements. Parametric model tests were carried out to figure out effects of factors on the capacity of wall by changing materials of reinforcing strip, strip length, strip arrangement. Tests were analyzed and were compared with the various design methods currently in use to verify feasibility of them. As a result of it, a proper design method was recommended.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.4 no.1
• /
• pp.33-39
• /
• 1979

The cash management problem as a part of working capital management has been extensively studied. By and large the articles surveyed lacked consideration of long-term assets and the proper tax treatment of them. Recognizing that investment activities - long-term as well as short-term generate cash inflows, leads one to conclude that these investments should be included in the cash management problem. The liquidity of long term investments is an integral part of the cash management problem. This paper formulated a cash management model which incorporate the effect of long term investments and their liquidity on cash holdings. Although all of the models formulated could be solved using mathematical programing techniques, the mere size of the problem in terms of the number of variables and constraints leads one to seek other methods. For this reason rules were developed using the Kuhn-Tucker conditions thereby substaintially avoiding the programming calculations or at least easing them significantly.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.17 no.1
• /
• pp.3-16
• /
• 1992

We present a modified Tank and Hopfield's neural network model for solving Linear Programming problems. We have found the fact that the Tank and Hopfield's neural circuit for solving Linear Programming problems has some difficulties in guaranteeing convergence, and obtaining both the primal and dual optimum solutions from the output of the circuit. We have identified the exact conditions in which the circuit stops at an interior point of the feasible region, and therefore fails to converge. Also, proper scaling of the problem parameters is required, in order to obtain a feasible solution from the circuit. Even after one was successful in getting a primal optimum solution, the output of the circuit must be processed further to obtain a dual optimum solution. The modified model being proposed in the paper is designed to overcome such difficulties. We describe the modified model and summarize our computational experiment.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.129-135
• /
• 2009

In this paper, a finite element model is presented for the prediction of roll force and strip thickness in a backup-roll-drive mill. The proposed FE model is focused mainly on analyzing the elastic/plastic behavior between a work roll and a strip as well as the rigid/plastic behavior between a backup roll and a work roll. The capability of the proposed model is demonstrated through application to 4-high silicon steel rolling mill at POSCO. Results show that the predicted roll force and strip thickness rolled accurately agree with the measured them. It is also illustrated that the proper position of work roll displaced to one side from the vertical centerline of the backup-roll may be determined by minimizing the horizontal force of work roll.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.2
• /
• pp.116-125
• /
• 2003

Four models for stick-slip friction are presented and are adopted for a numerical simulation study for a manual transmission clutch damper in idle mode. Meaning of parameters for friction models are explained and proper values are suggested. Also explained ate the reason why those specific values for the parameters are chosen. Preferable model for the clutch damper In Idle mode is discussed in terms of calculation efficiency and fidelity of the model based on real measured data. For clutch damper idle mode simulation studies, all four models perform equally well.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.696-702
• /
• 2006

Flutter characteristics of composite curved wing were investigated in this study. The efficient and robust system for the flutter optimization of general composite curved wing models has been developed using the coupled computational method based on both the standard genetic algorithm and the micro genetic algorithms. Micro genetic algorithm is used as an alternative method to overcome the relatively poor exploitation characteristics of the standard genetic algorithm. The present results show that the micro genetic algorithm is more efficient in order to find optimized lay-ups for a composite curved wing model. It is found that the flutter stability of curved wing model can be significantly increased using composite materials with proper optimum lamination design when compared to the case of isotropic wing model under the same weight condition.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.80-89
• /
• 2002

The flame structure and soot formation in Acetylene-Air nonpremixed jet flame are numerically analyzed. We employed two variable approach to investigate the soot formation and oxidation processes. The present soot reaction mechanism involves nucleation, surface growth, particle coagulation, and oxidation steps. The gas phase chemistry and the soot nucleation, surface growth reactions are coupled by assuming that the nucleation and soot mass growth has the certain relationship with the concentration of pyrene and acetylene. We also employed laminar flamelet model to calculate the thermo-chemical properties and the proper soot source terms from the information of detailed chemical kinetic model. The numerical and physical model used in this study successfully predict the essential features of the combustion processes and soot formation characteristics in the reaction flow field.

• Explosives and Blasting
• /
• v.22 no.4
• /
• pp.1-6
• /
• 2004

In this study, dimension and scale factor of explosives were calculated. Proper dimension and scale factor were considered. Scale factor of 1/256 was obtained when scaled factor of the length was l/4. This value is similar to the ratio of explosives of model test and demolition structure. It seemed that scale factor of length should be larger than 1/4.