• Proceedings of the KIEE Conference
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.660-662
• /
• 1993

We have numerically analyzed by using the Beam Propagation Method the Dual-channel directional couplers, which peforms a number of useful fuctions in thin-films devices, including power division, modulation, switching, frequency selection, and polarization selection. We also use the effective index method to reduce one dimension.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• 제44권2호
• /
• pp.11-18
• /
• 2007

Back propagation algorithm based on a gradient-decent method has been widely used to the training of a neural network. However, this algorithm have some problems such as dropping the minimum value in a local area according to an initial value and setting the number of units in a hidden layer when training the neural network. Accordingly, to solve the above-mentioned problems, this paper proposes a genetic algorithm using the training method of the neural network. Thus, the improved genetic algorithm using a new crossover and mutation method is proposed to discriminate 3 bit parity. Experiments confirm that the proposed system is effective for training speed after demonstrating for generation gap, the number of units in the hidden layer, and the number of individuals.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권4호
• /
• pp.491-500
• /
• 2016

This paper presents a highly efficient aeroelastic optimization method based on a surrogate model; the model is verified by considering the case of a high-aspect-ratio composite wing. Optimization frameworks using the Kriging model and genetic algorithm (GA), the Kriging model and improved particle swarm optimization (IPSO), and the back propagation neural network model (BP) and IPSO are presented. The feasibility of the method is verified, as the model can improve the optimization efficiency while also satisfying the engineering requirements. Moreover, the effects of the number of design variables and number of constraints on the optimization efficiency and objective function are analysed in detail. The accuracy of two surrogate models in aeroelastic optimization is also compared. The Kriging model is constructed more conveniently, and its predictive accuracy of the aeroelastic responses also satisfies the engineering requirements. According to the case of a high-aspect-ratio composite wing, the GA is better at global optimization.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.422-425
• /
• 2005

In an transversely isotropic composite laminates, the velocities, the particle directions and the amplitudes of reflected and transmitted waves were obtained using the equation of motion, the constitutive equation, and the displacement equation expressed by wave number and frequency Eigenvalue problem involving a velocity was solved by Snell's law. Finally, the results were confirmed by T300 Carbon fiber/5208 Epoxy materials. This approach could be applied to the detection of flaws in a transversely isotropic composite laminates by the water immersion C-scan procedure.

• Korean Journal of Medicinal Crop Science
• /
• 제15권5호
• /
• pp.315-318
• /
• 2007

An effective rapid propagation method was established through in vitro cultures of the medicinal plant, Cudrania tricuspidata. In vitro plantlets were obtained from in vitro germinated seeds. The various levels of cytokinins (BAP, Kinetin and TDZ) were tested on multiple shoot formation from plantlets. BAP (1.0 mg/l) treatment induced highest number of multiple shoots. Single shoot cultures gave higher initial shoot numbers than 5 shoots per culture. Among the various culture media, the shoot elongation was optimal on 2 MS basal medium without growth regulators. The IAA (2.0 mg/l) treatment induced highest number of roots. IBA (2.0 mg/l) treatment more promoted in vitro root growth than other concentrations. Rooted shoots were transferred directly to small pots with an artificial soil and successfully acclimatized.

• The Journal of the Acoustical Society of Korea
• /
• 제15권4E호
• /
• pp.9-13
• /
• 1996

We developed an iterative algorithm which could improve the resolution of reconstructed tomograms having random attenuation patterns and analyzed the limitation of this algorithm. The simple back-and forth propagation algorithm has depth resolution about four wavelengths. An iterative algorithm, based on back-and-forth propagation, can be used to improve the resolution of reconstructed tomograms. We analyzed the wavefield for multi-layered specimen and programmed iterative algorithm using Clanguage. Simulation results show that the images get clearer as the number of iterations increases. Also, unambiguous images can be reconstructed using this algorithm even when the layer separation is only two wavelengths. However, this iteration algorithm comes up with an incorrect solution for the number of projections less than five.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.109-114
• /
• 2010

Interface tracking of two phase is significant to analyze multi-phase phenomena. The VOF(Volume of Fluid) and level set are well known interface tracking method. However, they have limitations to solve compressible flow and incompressible flow at the same time. CIP(Cubic Interpolate Propagation) method is appropriate for considering compressible and incompressible flow at once by solving the governing equation which is divided up into advection and non-advection term. In this article, we analyze the droplet impingement according to various We number using improved CIP method which treats nonlinear term once more comparison with original CIP method. Furthermore, we compare spread radius after droplet impingement on the wall with the experimental data and original CIP original CIP method, and it reduces the mass conservation error which is generated in the numerical analysis comparison with original CIP method.

• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1087-1094
• /
• 2005

This paper presents the validity and limitation of the thin-shell approach for the analysis of elastic wave propagation in a pipe with nonviscous liquid. The phase velocities calculated by the thin-shell approach were compared with those calculated by the thick-cylinder approach. In contrast to the case of the empty pipe, where only two modes were obtained and the first mode was calculated in a limited frequency range, the results for the liquid-filled pipe exhibits a large number of modes due to the large number of branches of the apparent liquid mass. Several of the lowest modes of the waves in a liquid-filled pipe were calculated for various pipe thicknesses in a low frequency range. The thin-shell approach was valid for a reasonable range of pipe thicknesses.

• Journal of the Korean Society of Propulsion Engineers
• /
• 제10권2호
• /
• pp.62-69
• /
• 2006

In transversely isotropic composite laminates, the velocities, the particle directions and the amplitudes of reflected and transmitted waves were obtained using the equation of motion, the constitutive equation, and the displacement equation expressed by wave number and frequency. Eigenvalue problem involving a velocity was solved by Snell's law. Finally, the results were confirmed by 7300 Carbon fiber/5208 Epoxy materials. This approach could be applied to the detection of flaws in transversely isotropic composite laminates by the water immersion C-scan procedure.

• The Transactions of the Korea Information Processing Society
• /
• 제3권1호
• /
• pp.144-152
• /
• 1996

Recently, as the demands for radio spectrum are growing and the number of cell sites is increasing rapidly, the spectrum engineering plays an important role in estimating frequency sharing and reuse. The radio propagation analysis is essential in the basic technology of radio network design such as deciding the service area and selecting the position of the base station. But, domestic propagation environment in which mountainous region is occupying over 70% of our terrain does not allow us to apply foreign studies which are deduced in highly different environments. Therefore, we need to have our propagation analysis system derived from our own terrain condition. In this paper, we propose the propagation prediction model which issuitable toour propagation environment, and also usinghis model, we implement thesimulator based on GIS(Geographic Information System)which can be applied to both spectrum engineering and radio propagation analysis. We showed that this simulator can well be applied to frequency assignment, propagation network design as well as other radio services. Considering the results of our analysis, we could guarantee the standard deviation of error between the measured data and predicted results as 5 to 7 dB.