• Proceedings of the Korean Institute of Landscape Architecture Conference
• /
• 2007.10b
• /
• pp.60-65
• /
• 2007

Workshops and discussions on the community planning process and visions for the future have progressed with the cooperation of the administration, citizens and specialists. However, they require a technical proof. For this reason, it is difficult to achieve a standard, whereby city dwellers are satisfied. In this study, the Delphi method was selected as a support tool, and an attempt was made to grasp the intentions and interests of city dwellers. Then, the community planning process was applied by using the Delphi method for urban areas with sparse identification. Participants were residents and commuters in the target areas. Categories were 'environment', 'community' and 'cultural sensibility'. For reducing the cost and time taken by investigators, and to enable those living in the community to participate in voluntaries and flexibility, we used a web survey as an investigation method. As a result, we could express the regional characteristics, problems and community planning intentions of city dwellers. The results suggested the validity of web surveys in regional evaluation, and explained the visions for the future and response attitudes, as well as the existence of a new identification that gives consideration to voluntary and flexibility of participation.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.3-8
• /
• 2006

The heat pump system is attractive alternatives to conventional heating and cooling systems owing to their higher energy utilization efficiency. The thermal loads of commercial and institutional buildings are generally cooling-dominated. In this study have been developed ice storage type heat pump system for cooling and heating by heat pipe. This system was practiced performance test on evaluation criteria for heat storage systems. Accomplished the actual proof examination and looked into the performance of the system. In this study, measurement and analysis of ice storage type heat pump system for cooling and heating by heat pipe. The heat pump unit COP appears 3.05 for cooling and 4.20 for heating. As a result, the method to energy saving and to using a substitute energy actively that is heat pump cooling & heating system is expected by heat pipe. Thermal storage capacity appears $19.5RTH/m^3$ for cooling.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.2
• /
• pp.151-161
• /
• 2019

In this study, to evaluate the High Altitude Electromagnetic Pulse(HEMP) protection performance of UHPC/CNT composites by the content of Carbon nanotubes(CNTs), Electromagnetic Shielding Effectiveness(SE) test was performed based on MIL-STD-188-125-1. And the results were verified by applying the Antenna theory. In the case of UHPC with a thickness of 200 mm mixed with 1 % CNT of cement weight, the SE was 28.98 dB at 10 kHz and 45.94 dB at 1 GHz. Then the Scabbing limit thickness for bullet proof was computed based on the result of compressive strength test which was 170 MPa, and it was examined whether it satisfied the HEMP protection criteria. As a result, the required HEMP shielding criteria were satisfied in all frequency ranges as well as the scabbing limit thickness was reduced by up to 43 % compared with that of ordinary concrete.

• Earthquakes and Structures
• /
• v.22 no.2
• /
• pp.109-120
• /
• 2022

Older or damaged structures can require significant retrofit to ensure they perform well in subsequent earthquakes. Supplemental damping devices are used to achieve this goal, but increase base shear forces, foundation demand, and cost. Displacement reduction without increasing base shear is possible using novel semi-active and recently-created passive devices, which offer energy dissipation in selected quadrants of the force-displacement response. Combining these devices with large, strictly passive energy dissipation devices can offer greater, yet customized response reductions. Supplemental damping to reduce response without increasing base shear enables a net-zero base shear approach. This study evaluates this concept using two incremental dynamic analyses (IDAs) to show displacement reductions up to 40% without increasing base shear, more than would be achieved for either device alone, significantly reducing the risk of response exceeding the unaltered structural case. IDA results lead to direct calculation of reductions in risk and annualized economic cost for adding these devices using this net-zero concept, thus quantifying the trade-off. The overall device assessment and risk analysis method presented provides a generalizable proof-of-concept approach, and provides a framework for assessing the impact and economic cost-benefit of using modern supplemental energy dissipation devices.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.5
• /
• pp.1634-1652
• /
• 2022

Due to the increasing need for data sharing in the age of big data, how to achieve data access control and implement user permission revocation in the blockchain environment becomes an urgent problem. To solve the above problems, we propose a novel blockchain-based data sharing scheme (BDSS) with fine-grained access control and permission revocation in this paper, which regards the medical environment as the application scenario. In this scheme, we separate the public part and private part of the electronic medical record (EMR). Then, we use symmetric searchable encryption (SSE) technology to encrypt these two parts separately, and use attribute-based encryption (ABE) technology to encrypt symmetric keys which used in SSE technology separately. This guarantees better fine-grained access control and makes patients to share data at ease. In addition, we design a mechanism for EMR permission grant and revocation so that hospital can verify attribute set to determine whether to grant and revoke access permission through blockchain, so it is no longer necessary for ciphertext re-encryption and key update. Finally, security analysis, security proof and performance evaluation demonstrate that the proposed scheme is safe and effective in practical applications.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1342-1349
• /
• 2023

The planning accuracy of charged particle therapy (CPT) is subject to the accuracy of stopping power (SP) estimation. In this study, we propose a method of deriving a pseudo-triple-energy CT (pTECT) that can be achievable in the existing dual-energy CT (DECT) systems for better SP estimation. In order to remove the direct effect of errors in CT values, relative CT values according to three scanning voltage settings were used. CT values of each tissue substitute phantom were measured to show the non-linearity of the values thereby suggesting the absolute difference and ratio of CT values as parameters for SP estimation. Electron density, effective atomic number (EAN), mean excitation energy and SP were calculated based on these parameters. Two of conventional methods were implemented and compared to the proposed pTECT method in terms of residuals, absolute error and root-mean-square-error (RMSE). The proposed method outperformed the comparison methods in every evaluation metrics. Especially, the estimation error for EAN and mean excitation using pTECT were converging to zero. In this proof-of-concept study, we showed the feasibility of using three CT values for accurate SP estimation. Our suggested pTECT method indicates potential clinical utility of spectral CT imaging for CPT planning.

• The Journal of Information Systems
• /
• v.33 no.2
• /
• pp.105-124
• /
• 2024

Purpose This study aims to propose a blockchain-based platform that can guarantee enhanced trustworthiness in corporate ESG efforts, demanded by global ESG initiatives such as GRI and TCFD. Blockchain technology, recognized for its transparency and data immutability, can contribute to building trust in ESG disclosures, meeting the data transparency verification needs required by these initiatives. This research also explores the use of NFTs representing unique ESG efforts by companies, helping them in organizing and sharing ESG information with investors and consumers. Design/methodology/approach This study utilizes Hyperledger Fabric, a permissioned blockchain known for its enhanced transparency, scalability, and suitability for business transactions, to develop a blockchain platform for managing and disclosing ESG information assets in a trustworthy manner. Furthermore, it introduces the concept of ESG NFTs as a more reliable method for conveying ESG information to stakeholders, where ESG NFTs undergo verification process by third-party authenticators and evaluation by independent evaluators for credibility of ESG disclosure. Findings The use of NFTs, which has been predominantly intended for market trading in public blockchain, offers a credible means of disseminating corporate ESG status and evaluations in a permissioned blockchain, better fit for business transactions. By representing information assets as NFTs, which are tamper-proof and establish clear ownership, the proposed platform enables effective management of ESG-related information assets.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.10
• /
• pp.1571-1583
• /
• 2008

The study aimed to investigate the actual condition of working clothes in the Changwon National Industrial Complex and to analyze the industrial workers' satisfaction with and preference to the working clothes in terms of the clothing performance and work motion factors. 1 major companies in machinery, automotive, industrial engineering, shipbuilding and rolling stock industries located in the industrial complex were selected as the subject firms. Approximately 900 workers responded to the questionnaire designed for the research and the results derived from the research were as follows. (1) The subject employees were divided into 4 work groups, i.e. the $1^{st}$ work group: managerial, general affairs, sales, production planning; the $2^{nd}$ group: quality assurance, material planning and distribution, product inspection; the $3^{rd}$ group: electric, facilities, machinery, vehicles; and the $4^{th}$ group: cutting, pressing, rolling, welding and coating. (2) The significant work environmental factors considered by all work groups were air ventilation, noise and dust factors and in particular, the most dissatisfied factors evaluated by manufacture workers were insulation, noise, dust and vibration. (3) According to the employees' work motion evaluation, the work motion diversity and frequency increased in proportion to the degree of work intensity. Besides, manufacture workers more frequently wore the working clothes even during the off-duty hours comparing to the evaluation of the other work groups. (4) The most important clothing performance factors considered by manufacture work groups were perspiration absorption, stretch, air permeability, tactile sense softness, soil proof in order.

• Fire Science and Engineering
• /
• v.26 no.1
• /
• pp.10-15
• /
• 2012

The fire event occurred in fire proof zone often causes serious electrical problems such as shorts, ground faults, or open circuits in nuclear power plants. These would be directed to the loss of safe shutdown capabilities performed by safety related systems and equipments. The fire event can treat the basic design principle that safety systems should keep their functions with redundancy and independency. In case of a cable fire, operators can not perform their mission properly and can misjudge the situation because of spurious operation, wrong indication or instrument. These would deteriorate the plant capabilities of safety shutdown and make disastrous conditions. In this paper, investigation and cause analysis of cable fire in Nuclear Power Plant, we described the cable fire temperature and functional failure criteria and the cable functional failure temperature evaluation by exposed fire is studied.

• Convergence Security Journal
• /
• v.14 no.6_1
• /
• pp.3-12
• /
• 2014

The purpose of this study is to identify disciplinary professors' core competencies in Div. Military Science student. To best accomplish the study, I select core competencies in the precedent study about Disciplinary Professors' Core Competencies studies. The 5 factors of core competencies are as follow ; teaching core competency, evaluation core competency, guidance core competency, class management core competency, speciality development core competency. Through this study I developed disciplinary process model. This model is conducted to fit the structural relationship among the disciplinary professors' core competencies and students' life satisfaction and aspiration for military occupation. But this study has some restriction, so we should study actual proof the more.