• The Journal of the Acoustical Society of Korea
• /
• v.18 no.6
• /
• pp.17-30
• /
• 1999

This paper proposes a new stereophonic acoustic echo canceller to prevent impairments on the voice quality and to remove acoustic echo effectively appearing in stereo environment at the instant of abrupt change of the transmission room environment in teleconferencing system. In stereophonic acoustic echo canceller, the major defective problems are the large computational complexity of estimating echo path systems due to the long impulse response of the true echo paths and the performance degradation of echo canceller due to large correlation between dual stereo signals. Moreover, the change of the suboptimal solution for the echo canceller was considered as a critical deficient factor on to the performance of stereophonic echo canceller. To overcome these problems, this paper proposes pseudo stereophonic acoustic echo canceller using Hyper-plane projection algorithm, which shows the robustness to the environment change of the transmission room and the efficiency of computational complexity.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.12 no.2
• /
• pp.69-77
• /
• 2006

Angiography means that a check up to know an abnormal condition in all the blood vessels include from the heart, aortae, cerobrovascular and abdonominal artery to hands and feet. Main examples of this are cerebral angiography, abdominal, liver for urinary anomaly, renovascular angiography, and artery and vein in arms and legs. Angiography uses radial rays or angiography equipment for an image output during interventional procedure and compositive diagnosis. The acts which performed in a projection room have changed drastically. In general, it is performed by using equipment which is attached one or two C-arms and the method of inserting catheter in vein after anesthesia. For this reason, some rooms that consist of angiography room units should be planned not only for expensiveness equipment and facilities also to be germ-free. Nowadays, in the angiography unit case, it is placed independently as the central part of many hospitals. It does not belong to the imaging medical department any more as considering raising filming times and the relation between C.C.U.(coronary care unit) and operation unit. This means the acts performed are diversified and well-organized rooms in support of diagnosis are required. However, it is difficult to plan the angiography room unit due to domestic researches and data on this unit are not enough. Therefore, this study aims at bringing up basic issue for architectural planning of the angiography unit in general hospital.

• Journal of the Korean Society of Radiology
• /
• v.5 no.5
• /
• pp.237-244
• /
• 2011

Generally, X-ray examinations for dentistry use low energy radiation. It explains that the radiations are mainly absorbed to a human body because of the weak permeability. We made up some counterplans for decrease in radiation exposure, when guardians and radiologists are overexposed owing to unavoidable circumstances. The equipments for the test are GX-770 and CRANEX TOME CEPH which are used for various exams. Besides we measured the radiations in the projection room and in the control room using model 2026c and 20X6-1800. According to the test, the measurement value in the control room was low dose below $20{\mu}R$, the maximum dose in the projection room was $702.8{\mu}R$ and the measurement value of back dose was higher than lateral one. As the result, if we use a shielding door, it's effective for radioprotection and when we didn't prepare protectors, we should secure appropriate distance and be situated at the side area($90{\sim}135^{\circ}$) on the basis of centeral radiation. That way will provide valuable aid for radioprotection.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.367.2-367
• /
• 2002

영화관의 구조설계에서 중요한 고러 인자 중에서 음향적 관점뿐만 아니라, 영사기의 진동으로 인한 영상의 떨림 현상은 관람석에서 미치는 구조물의 동적 특성 문제가 있다. 이는 영사기-스크린-관람객 사이의 3인자에 대한 상대진동허용변위에 의해 지배됨을 고려하여, 이를 만족시키는 변수 등에 따른 진동허용규제치를 결정하는 절차가 필요하다 본 연구에서는 영화관의 진동허용규제치를 이들 3인자에 대한 변수들을 고려한 결정 과정을 공학적인 차원에서 정리하였으며, 복합상가 건물내의 영화판 영사실에 이를 만족하기 위한 진동 저감설계 자료에 활용하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3192-3202
• /
• 2014

This study has its purposes on analyzing specific features of the elements according to scales of 32 main buddhist sancta among wooden temples with gable roof that are nationally designated as cultural assets, and analyzing influences and proportional relations between main and submaterials, so that it could be basic and objective data for restore and repair cultural assets in the future. Results of the study are following. First of all, the average plane proportion of doritong (facade) and yangtong (side) in 3-room building is about 1.31:1, while it is 1.70:1 in 5-room building. Secondly, as a result of analyzing the locational proportion and thickness of pillars at each location, floor room turned out to have wider space between pillars than that of edge room or side room in both cases of 3 and 5-room buildings. In the mean time, for the average thickness of the pillars in 3-room building, it was 491mm for corner pillars, 433mm for general pillars in cases of 3-room building, while it was 595 and 511mm respectively in cases of 5-room building. The reason why corner pillars are 60~80mm thicker than general ones in average, is determined to considered structural stability and optical illusion. For the third, as a result of analyzing the influences on pillar thickness, eaves projection and eaves height according to the scale(dimension) of buildings, 3-room buildings have outstanding correlation as its scale(dimension) goes bigger, while 5-room ones are not very much influenced by its scale(dimension). For the fourth, as a result of the relation between pillars and eaves, both of 3 and 5-room buildings have longer-projected and higher eaves as their pillars go taller; especially height of eaves turns out to have very close relation between length of pillars. In addition to that, both of 3 and 5-room buildings have much projected eaves as the eaves go higher.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.3 s.35
• /
• pp.305-313
• /
• 1991

In order to investigate industrial fatigue due to visual display terminal (VDT) work of banking operations the questionnaire survey for subjective symptoms of fatigue was carried out on 470 bank clerks who had been engaged in VDT work for various length of work hours. The questionnaires comprised three groups of 10 items each, representing dullness and sleepiness (level of cerebral activation), difficulty in concentration (level of motivation) and bodily projection of fatigue. The results were as follows : 1. Of the 30 items of questionnaires, the highest percentage was accounted for by 'eye strain' (51.5% ), followed by 'feel stiffness in the neck or the shoulders'(33.4%), 'feel a pain in the low back'(26.8%), 'whole body feels tired'(19.6%) and 'feel headache'(17.9%) in the order of sequence. 2. The average weighted score for the first group of questionnaire items (dullness and sleepiness) was the largest among three groups and was followed by 'the third cup (bodily projection of fatigue) and the second item group (difficulty in concentration) in the order of sequence, suggesting the heavier mental stress of VDT work in banking operations rather than physical burden. 3. In terms of the age and sex of workers, work duration and VDT work percentage, the difference in average weighted score was noted only between sex, the score of female being larger than that of male. 4. The complaint rates of subjective symptoms showed close associations with the subjective optimums of room temperature, ventilation, illumination and noise level. 5. The significant correlation was showed between age, work duration and item of 'whole body feels tired', between VDT work percentage and items of 'eye strain' and 'feel stiffness in the neck or shoulders' and between all items of subjective symptoms.

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.116-124
• /
• 2016

In this paper, we propose digital exhibition contents for the aquarium, especially 'Gyeongpo Lagoon Ecological Museum'. We try to plan appropriate media contents that can be mixed with the aquarium storytelling. The aquarium must have special spaces that are not related with an exhibition directly but are necessary for survival of fishes such as a water circulation room. We design the special spaces using media contents and let visitors feel that the whole aquarium is in the ocean. First of all, we investigate the aquarium currently under construction. And then, we propose the appreciate media platforms and plan individual content. We suggest 3 types of media platforms, 3D water projection, interactive games utilizing Kinect, and a fog screen. Moreover, we produce 2D drawing concepts, 3D modeling images, and virtual exhibitions in virtual reality for the representation of the location in which those platforms are installed and the media contents we plan. The pre-visualization is helpful for the media platform construction and is used as a rough sketch to producing an animation shown in the exhibition.

• International Journal of Automotive Technology
• /
• v.2 no.1
• /
• pp.17-23
• /
• 2001

Measurements of the initial values lead to an inverse and mathematically unprecisely formulated problem. A precise definition of an inverse problem is possible. It is to state a mathematical model of a physical process with clearly defined initial and exit values for the system behind the process. One can grasp the idea of an inverse problem by considering the tire as a copy of the objects of nature in a room with observations. Interpretation of nature is generally a result of an inverse problem. On one hand, the tire may be represented through the sensory organs and the nervous system as well as the experiences of the developer's existing apparatus of the projection of reality. On the other hand, it may be represented by a physical law or a model that can be confirmed or is to be refuted with the help of suitable measurements. During reconstruction of a measuring signal and the identification of a black box that can be assumed to be linear and causal, the tire becomes a first type Volterra integral equation of the convolution type. But measurements of the initial values are always fuzzy, the errors grow and the system behavior can no longer be forecasted. Thus, we have to deal with a chaotic system. This chaos produces fractals in a natural way. These are self-similar geometric structures. This self-similarity is clearly visible in the design.

• Journal of Korean Society of Rural Planning
• /
• v.26 no.2
• /
• pp.13-24
• /
• 2020

This study analyzed the management efficiency of local food stores that are increasing recently. The analysis targeted 25 local food outlets in Jeonbuk area, and the analysis method analyzed the efficiency by CCR model. The input variables used to analyze the input-oriented efficiency of local food stores are business expenses, employees, organizational number of participating farms, and number of items, and sales are used as output variables. The main contents of the analysis are as follows. First, local food outlets increased due to support projects such as the government, local governments, and agricultural cooperatives, but their dependence was high. Second, the management efficiency of 25 local food stores in Jeonbuk is 28.0% when the efficiency is 1.000, and 72.0% of inefficient local food stores. Third, considering the projection point and the reference group, there was room for improvement in input variables. Therefore, it was determined that improvement efforts are needed to secure the continuity of local food outlets in the future. However, this study will require review of variable selection and analysis methods for further analysis.

• Journal of radiological science and technology
• /
• v.21 no.1
• /
• pp.24-28
• /
• 1998

A conventional treatment machine shapes x-ray fields by a set of dense metal collimators(jaws) built into the machine. These collimators are positioned by the therapist using hand controls in the treatment room, and usually remain stationary during treatment. The collimator jaws of treatment machines produce rectangular beams. Conventional beam shaping is accomplished through the use of a combination of these collimator jaws and secondary custom beam blocks attached to the accelerator beyond the collimator Jaws. The jaw positions for a particular field can be retrieved from a computer. One application of this increased capability is replacement of beam blocks for field-shaping with the MLC. There are three basic applications of the MLC. The first application is to replace conventional blocking. A second function of the MLC is related to conformal therapy, adjusting the field shape to match the beam's eye view projection of a planning target volume during treatment. The third application is the use of the MLC to achieve beam intensity modulation. The aim of this paper is to provide basic principle and to state fundamental concepts needed to implement the use of a multileaf collimator in the conventional clinical setting. The use of MLC field shaping is likely to save time and to incur a lower operating cost when compared to the use of beam blocks.