• The Journal of the Korea Contents Association
• /
• v.14 no.1
• /
• pp.24-29
• /
• 2014

This paper proposes a kinect-based human motion recognition model for the 3D contents control after tracking the human body gesture through the camera in the infrared kinect project. The proposed human motion model in this paper computes the distance variation of the body movement from shoulder to right and left hand, wrist, arm, and elbow. The human motion model is classified into the movement directions such as the left movement, right movement, up, down, enlargement, downsizing. and selection. The proposed kinect-based human motion recognition model is very natural and low cost compared to other contact type gesture recognition technologies and device based gesture technologies with the expensive hardware system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.663-664
• /
• 2018

The car design has changed a lot over the past 100 years, but the side mirrors have not changed. It is not right in the fourth round of the Industrial Revolution. It is also an analog format, which has many disadvantages. Accordingly, by replacing the side mirror to the camera to change the digital it was improve the limitations and disadvantages of the 'mirror' with. It also has additional benefits such as fuel savings of 5 to 10 percent per year and automatic detection of threats. In this project, we used Razberry pie, which is highly compatible, as a main board, and connected infrared distance sensor and monitor module to focus on automatic threat detection.

• Publications of The Korean Astronomical Society
• /
• v.20 no.1 s.24
• /
• pp.21-27
• /
• 2005

We have been performing a wide-field photometric monitoring program, named SPVS (Short-Period Variability Survey), at the Bohyunsan Optical Astronomy Observatory (BOAO). The observation system consists of a small refracting telescope (D = 155 mm, f = 1050 mm) and a $2k{\times}3k$ CCD Camera. The field of view is $1.0^{\circ}{\times}1.5^{\circ}$. Detection limit is about V = 13 for short-period small amplitude variables such as ${\delta}$ Scuti-type pulsating stars, and about V = 15 for long-period large amplitude variables such as eclipsing binaries and RR Lyrae stars. The instrument is designed to be remote-controlled through internet. The primary purpose of this project is to search for variable objects in bright Galactic open clusters. We present results of test observations conducted towards NGC 7092.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.3
• /
• pp.211-219
• /
• 2016

Korea's lunar exploration project includes the launching of an orbiter, a lander (including a rover), and an experimental orbiter (referred to as a lunar pathfinder). Laser altimeters have played an important scientific role in lunar, planetary, and asteroid exploration missions since their first use in 1971 onboard the Apollo 15 mission to the Moon. In this study, a laser altimeter was proposed as a scientific instrument for the Korean lunar orbiter, which will be launched by 2020, to study the global topography of the surface of the Moon and its gravitational field and to support other payloads such as a terrain mapping camera or spectral imager. This study presents the baseline design and performance model for the proposed laser altimeter. Additionally, the study discusses the expected performance based on numerical simulation results. The simulation results indicate that the design of system parameters satisfies performance requirements with respect to detection probability and range error even under unfavorable conditions.

• Publications of The Korean Astronomical Society
• /
• v.22 no.4
• /
• pp.169-175
• /
• 2007

The international cooperation project CIBER (Cosmic Infrared Background ExpeRiment) is a rocket-borne instrument, of which the scientific goal is to measure the cosmic near-infrared extra-galactic background to search for signatures of primordial galaxy formation. CIBER consists of a wide-field two-color camera, a low-resolution absolute spectrometer, and a high-resolution narrow-band imaging spectrometer. Currently, all the subsystems have been built, and the integration, testing, and calibration of the CIBER system are on process for the scheduled launch in June 2008.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.2
• /
• pp.82-90
• /
• 2007

Recently, the development project is conducting disaster effect estimation to breed disaster, and cope these disaster beforehand provoking soil erosion and flood. Therefore, it is important to analyze and reduce of these disaster. In this study, it is intended to extract LS and C factors of soil erosion through the digital image. The photogrammetric technique, which employs the Remote Control Helicopter equipped with a non-metric digital camera, was used for the efficient survey and analysis of cutting slopes. As a result, we obtain more objective value of soil erosion factor using digital image.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.6
• /
• pp.43-53
• /
• 2010

The increasing interest in the use of automated photographic equipment in Korea enables to detect speed violation and enforce traffic laws. Since 1996, Korean National Police Agency has been promoting a project for installation of Automated Speed Enforcement (ASE) system aiming at reduction of accidents. Recently, point to point speed cameras operate to measure a driver's average speed across length of road and/or the spot speed at individual camera sites along the road length. In this study, we were analyzed to driver's operating characteristics in point to point speed cameras. The point to point speed camera system has link-long influence on drivers and their speeds despite enforcement being visible only at the start and end of enforced road length. Then, mean and 85th percentile speeds were below speed limit along enforced road length by the two camers. Also, Female drivers were driving at low speed than male drivers along the road length.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.3
• /
• pp.151-158
• /
• 2019

Patients with disabilities from various reasons such as disasters, injuries or chronic illness or elderly with limited body motion range due to aging are recommended to participate in rehabilitation programs at hospitals. But typically, it's not as simple for them to commute without help as they have limited access outside of the home. Also, regarding the perspectives of hospitals, having to maintain the workforce and have them take care of the rehabilitation sessions leads them to more expenses in cost aspects. For those reasons, in this paper, a home-based remote rehabilitation system using motion recognition is developed without needing help from others. This system can be executed by a personal computer and a stereo camera at home, the real-time user motion status is monitored using motion recognition feature. The system tracks the joint range of motion(Joint ROM) of particular body parts of users to check the body function improvement. For demonstration, total of 4 subjects with various ages and health conditions participated in this project. Their motion data were collected during all 3 exercise sessions, and each session was repeated 9 times per person and was compared in the results.

• Journal of The Korean Association of Information Education
• /
• v.16 no.4
• /
• pp.483-488
• /
• 2012

As propagation of mobile smart devices is widespread, it is an observable trend that the cases of utilizing them are increasing in the school programs, and it is also anticipated that they will be very important part of the educational equipment in near future. For this reason the department of education and science technology has announced a medium and long term project on the education with smart device, which is undergoing the preparation stage, and the various academic and industrial institutes have actively produced the related research results and the application prototypes. In this paper we propose a framework on design and implementation of a visual context recognition system for educational purpose usable in the school program by utilizing a module for recognition of the texts embedded in the image captured by video camera from mobile smart device. The system proposed in this paper is consisted of the four modules, such as, image acquisition, image processing, information extraction, and knowledge representation, which are explained in details with the practical examples.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.1
• /
• pp.11-19
• /
• 1999

Lately, with the development of the fields of computer and photogrammetry, Digital Photogrammetric Systems are widely used for the generation of GIS basemap, the acquisition of topographic information and DEM, the formation of digital orthophoto, three-dimensional viewing and so on. According as the demand for the systems is rapidly increasing, we suggest keenly the necessity of domestic technical development, because all of these systems depend on foreign technology until now. In this study, by using digital photogrammetry method, with Visual C++ language, we have developed Digital Photogrammetric Systems for Windows which is able to get three-dimensional coordinates through interior orientation, exterior orientation, epipolar line, image matching from a pair of aerial photos taken with metric camera. This system consists of not only a module which can revise digital map that is being made at National Geographic Institute as a part of data construction project of National Geographic Information System, but also a module which can view three-dimensional image on the screen monitor by using anaglyph for three-dimensional analysis. The digital photogrammetry modules developed in this study are expected to be used as primary modules for the effective management of the urban as well as main modules in developing professional digital photogrammetric systems.