• Wind and Structures
• /
• 제10권3호
• /
• pp.269-285
• /
• 2007

This paper assesses the damage to high-set rectangular-plan houses with low-pitch gable roofs (built in the 1960 and 70s in the northern parts of Australia) to wind speeds experienced in tropical cyclones. The study estimates the likely failure mode and percentage of failure for a representative proportion of houses with increasing wind speed. Structural reliability concepts are used to determine the levels of damage. The wind load and the component connection strengths are treated as random variables with log-normal distributions. These variables are derived from experiments, structural analysis, damage investigations and experience. This study also incorporates progressive failures and considers the inter-dependency between the structural components in the house, when estimating the types and percentages of the overall failures in the population of these houses. The progressively increasing percentage of houses being subjected to high internal pressures resulting from damage to the envelope is considered. Results from this study also compare favourably with levels of damage and related modes of failure for high-set houses observed in post-cyclone damage surveys.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권3호
• /
• pp.48-54
• /
• 2022

본 연구는 균열에 의한 콘크리트 전단벽 강성저하 영향 평가를 위해 수행되었으며, 극한 내지진 하중의 60%까지 재하한 비선형 해석 결과, 사전 균열효과에 의해 비손상 대비 진동수의 12%정도 진동수가 감소하였으며 강성 측면에서 23%정도의 감소현상을 나타냈다. 단계적으로 지진하중의 크기를 증가시킨 비선형 해석 결과, 지진하중의 세기가 커짐에 따라 콘크리트 전단벽체에 전단균열이 발생하여 진전함을 파악하고, 반복이력에 의한 에너지 손실과 강성 저하가 뚜렷하게 발생함을 알 수 있었다. 또한 두 가지 콘크리트 강도와 전단벽 제원에 대하여 지진하중의 크기가 극한 내지진 하중에 근접함에 따라 진동수의 감소량은 비손상 대비 10~40%정도로 나타났으며, 강성의 경우 비손상 대비 40%정도 수준까지 감소할 수 있는 것으로 나타났다.

• 대한조선학회논문집
• /
• 제52권3호
• /
• pp.248-254
• /
• 2015

The strength and fatigue life of Satin and Twill-woven CF/epoxy composite(CFRP) have been investigated. Damage mechanism fatigue method has been used to assess fatigue damage accumulation. It is based on measured residual stiffness and residual strength of carbon-fiber reinforced plastic(CFRP) laminates under cyclic loading. Fatigue damage evolution in composite laminates and predict fatigue life of the laminates were simulated by finite element analysis(FEA) method. The stress analysis was carried out in MSC patran/Nastran. A modified Hashin's failure criterion di rmfjapplied to predict the failure of the experimental data of fatigue life but a Ye-delamination criterion was ignored because of 2D modeling. Almost linear stiffness and strength degradation were observed during most of the fatigue process. These stress distribution data were adopted in the simulation to simulate fatigue behavior and estimate life of the laminates. From the results, the predicted fatigue life is more conservatively estimated than the experimental results.

• Steel and Composite Structures
• /
• 제19권6호
• /
• pp.1369-1379
• /
• 2015

In this study, a progressive damage modeling is developed to predict functional failure pressure of GRP pipes subjected to internal hydrostatic pressure. The modeling procedure predicts both first-ply failure pressure and functional failure pressure associated with the weepage phenomenon. The modeling procedure is validated using experimental observations. The random parameters attributed to the filament winding production process are identified. Consequently, stochastic simulation is conducted to investigate the influence of induced inconsistencies on the functional failure pressures of GRP pipes. The obtained results are compared to realize the degree to which random parameters affect the performance of the pipe in operation.

• Steel and Composite Structures
• /
• 제21권3호
• /
• pp.479-500
• /
• 2016

Seismic design criteria allow enhancing the structural ductility and controlling the damage distribution. Therefore, detailing rules and design requirements given by current seismic codes might be also beneficial to improve the structural robustness. In this paper a comprehensive parametric study devoted to quantifying the effectiveness of seismic detailing for steel Moment Resisting Frames (MRF) in limiting the progressive collapse under column loss scenarios is presented and discussed. The overall structural performance was analysed through nonlinear static and dynamic analyses. With this regard the following cases were examined: (i) MRF structures designed for wind actions according to Eurocode 1; (ii) MRF structures designed for seismic actions according to Eurocode 8. The investigated parameters were (i) the number of storeys; (ii) the interstorey height; (iii) the span length; (iv) the building plan layout; and (v) the column loss scenario. Results show that structures designed according to capacity design principles are less robust than wind designed ones, provided that the connections have the same capacity threshold in both cases. In addition, the numerical outcomes show that both the number of elements above the removed column and stiffness of beams are the key parameters in arresting progressive collapse.

• Composites Research
• /
• 제31권5호
• /
• pp.251-259
• /
• 2018

본 논문에서는 섬유강화복합재의 멀티스케일 해석을 위해 필요한 대규모/소규모 통계적 체적요소 모델을 개발하였다. 미시영역모델의 크기효과를 최소화하기 위해서 섬유를 최대한 포함한 거대모델을 구성하였다. 이를 위해 국부 영역의 요소 절단법을 이용하여 전체 유한요소 크기에 상관없이 신속한 격자 섬유/기지의 모델링이 가능한 요소생성기를 구성하였다. 이를 통해 대규모 통계 체적 모델을 도출하여 체적모델의 크기에 따른 국부하중 공유의 차이를 고찰하고, 섬유방향의 연속체손상역학모델을 BSVEs 모델 해석으로부터 도출 하였다. BSVEs 모델을 보편적인 RVE모델과 비교 검증하였다.

• 대한기계학회논문집A
• /
• 제38권12호
• /
• pp.1345-1350
• /
• 2014

본 연구에서는 자동차 판스프링을 대상으로 유리섬유 복합재의 적용을 위한 해석적 방법들을 제시하였다. 즉, 판스프링의 정적거동에 영향을 미치는 복합재 재료의 구성 성분비와 섬유각의 변화 등을 고려한 해석을 수행하였다. GFRP 복합재의 기계적 성질들은 ASTM 표준시험 방법을 따라서 직접 측정하였으며, 역해석 방법을 통해서 섬유와 수지 각각의 직교이방성과 등방성 성질들을 시험결과들로부터 재구성하였다. 다음으로 섬유의 방향과 섬유와 수지의 함유량 비와 같은 주요 재료변수들의 변화에 따른 스프링 계수들의 변화를 분석하였다. 마지막으로 초기 파괴하중을 예측하기 위해서 선형 탄성해석과 파손조건식을 이용해서 점진적 파괴해석을 수행하였으며, 그 결과 최초의 손상부위는 전단응력에 의해 판스프링의 모서리 부위에서 발생하였다.

• Advances in concrete construction
• /
• 제9권3호
• /
• pp.235-248
• /
• 2020

Progressive collapse in a structure occurs when load bearing members are failed and the adjoining structural elements cannot resist the redistributed forces and fails subsequently, that leads to complete collapse of structure. Recently, construction using precast concrete technology is adopted increasingly because it offers many advantages like faster construction, less requirement of skilled labours at site, reduced formwork and scaffolding, massive production with reduced amount of construction waste, better quality and better surface finishing as compared to conventional reinforced concrete construction. Connections are the critical elements for any precast structure, because in past, major collapse of precast structure took place because of connection failure. In this study, behavior of four different precast wet connections with U shaped reinforcement bars provided at different locations is evaluated. Reduced 1/3^rd scale precast beam column assemblies having two span beam and three columns with removed middle column are constructed and examined by performing experiments. The response of precast connections is compared with monolithic connection, under column removal scenario. The connection region of test specimens are filled by cast-in-place micro concrete with and without polypropylene fibers. Performance of specimen is evaluated on the basis of ultimate load carrying capacity, maximum deflection at the location of removed middle column, crack formation and failure propagation. Further, Finite element (FE) analysis is carried out for validation of experimental studies and understanding the performance of structural components. Monolithic and precast beam column assemblies are modeled using non-linear Finite Element (FE) analysis based software ABAQUS. Actual experimental conditions are simulated using appropriate boundary and loading conditions. Finite Element simulation results in terms of load versus deflection are compared with that of experimental study. The nonlinear FE analysis results shows good agreement with experimental results.

• 토지주택연구
• /
• 제11권2호
• /
• pp.95-104
• /
• 2020

This study aims to explore a purely mechanistic pavement analysis approach where viscoelasticity and fracture of asphalt mixtures are considered to accurately predict deformation and damage behavior of flexible pavements. To do so, the viscoelastic and fracture properties of designated pavement materials are obtained through experiments and a fully mechanistic damage analysis is carried out using a finite element method (FEM). While modeling crack development can be done in various ways, this study uses the cohesive zone approach, which is a well-known fracture mechanics approach to efficiently model crack initiation and propagation. Different pavement configurations and traffic loads are considered based on three main functional classes of roads suggested by FHWA i.e., arterial, collector and local. For each road type, three different material combinations for asphalt concrete (AC) and base layers are considered to study damage behavior of pavement. A concept of the approach is presented and a case study where three different material combinations for AC and base layers are considered is exemplified to investigate progressive damage behavior of pavements when mixture properties and layer configurations were altered. Overall, it can be concluded that mechanistic pavement modeling attempted in this study could differentiate the performance of pavement sections due to varying design inputs. The promising results, although limited yet to be considered a fully practical method, infer that a few mixture tests can be integrated with the finite element modeling of the mixture tests and subsequent structural modeling of pavements to better design mixtures and pavements in a purely mechanistic manner.

• 대한조선학회논문집
• /
• 제32권4호
• /
• pp.73-86
• /
• 1995

본 연구에서는 선박의 전진형 좌초(grounding with a forward speed)에 대한 손상 메카니즘을 분석하고, 구조손상 추정모델을 제안하였다. 손상 추정모델의 정도와 적용성을 검증하기 위하여 다양한 실험결과들과 비교하였다. 또한, 좌초사고에 의해 선저부가 손상을 입었을 경우 잔류강도(residual strength)의 부족으로 인한 선각의 점진 붕괴해석을 ALPS/ISUM 컴퓨터 코드를 이용하여 수행하는 방법을 제시하였다. 이 방법을 AFRAMAX급 Transverseless 이중선체 유조선의 좌초 해석문제에 적용하고, 구조손상의 크기와 붕괴 가능성을 검토하였다.