• Steel and Composite Structures
• /
• 제7권1호
• /
• pp.71-85
• /
• 2007

This study suggests modular composite profile beams, where the prefab concept is applied to existing composite profile beams. The prefab concept produces a beam of desired size having two types of profile: side module and bottom module. Module section will improve construction efforts because it offers several benefits : reduction of deflections due to creep and shrinkage, which might be found in existing composite profile beams; increase in span/depth ratio; and free prefabrication of any required beams. Based on the established analysis theory of composite profile beams, an analysis theory of modular composite profile beams was suggested, and analysis values were compared with experimental ones. The behavior of individual modules with increase of load was measured with a strain gauge, and the shear connection ratio between modules was analyzed by using the measured values. As a result of experiment, it was found that theoretical flexural strength on condition of full connection was 57%-80% by connection of modules for each specimen, and it is expected that flexural strength will approximate the theoretical levels through further module improvement.

• Tribology and Lubricants
• /
• 제5권2호
• /
• pp.107-112
• /
• 1989

This paper deals with strength analysis of tooth and method of manufacture of external tooth profile in harmonic drive. From the calculation of load imposed on the contact teeth, moximum contact stress is investigated to design the addendum modification coefficient. New tooth profile of the external gear is generated according to the law of gearing, assuming that internal gear has involute tooth profile. External tooth profile can't be manufactured by conventional exclusive tools which have pressure angle of 20$\circ$. The method to design cutter tooth profile is presented.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제26권3호
• /
• pp.235-252
• /
• 2023

We investigated the classification of learner groups for students' mathematical modeling competency and analyzed the characteristics in each profile group for each country and variable using PISA 2012 data from six countries. With a perspective on measuring sub-competency, we applied the latent profile analysis method to student achievement for mathematical modeling variables - Formulate, Employ, Interpret. The findings showed the presence of 4-6 profile groups, with the variables exhibiting high and low achievement within each profile group varying by country, and a hierarchical structure was observed in the profile group distribution in all countries, interestingly, the Formulate variable showed the largest difference between high-achieving and low-achieving profile groups. These results have significant implications. Comparison by country, variable, and profile group can provide valuable insights into understanding the various characteristics of students' mathematical modeling competency. The Formulate variable could serve as the most suitable predictor of a student's profile group and the score range of other variables. We suggest further studies to gain more detailed insights into mathematical modeling competency with different cultural contexts.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.90-95
• /
• 2001

f-$\theta$len is one of the important parts in Laser Scanning Unit because it affects on the optical performance of Laser Scanning Unit dominantly. It is necessary to find out the relationship between the surface profile error of f-$\theta$lens and the beam profile focusing on the Organic Photo Conductive drum in order to analysis the beam profile problems such as appearance of side lobe and expansion of center lobe. In this research, a simulation process which relates the surface profile characteristics to the beam profile has been developed by CODE V. The simulated beam profile also have been compared with the measurement results.

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.551-558
• /
• 2011

To analyze the effect of wear of wheel profile on the running stability of rolling-stock, theoretical and experimental studies were conducted on the profiles used in conventional lines. In experiment using 1/5 scale model to verify the results of the theoretical analysis, the test results of the critical speed for worn wheel profile samples show similar trend. In case of the conical type wheel profile(Profile 40), the equivalent conicity is increased with flange wear. But in case of the arc type wheel profile(Profile 20h), the equivalent conicity is decreased with flange wear. And the critical speed of the bogie was inverse proportion to the equivalent conicity. It is shown that the variation of the critical speed with the wheel wear could be changed according to the design concept and wear pattern of wheel profile. Results of the theoretical and experimental studies are discussed here.

• 한국정밀공학회지
• /
• 제23권11호
• /
• pp.78-84
• /
• 2006

The objective of this study is to design the optimal die profile that can prevent material fracture in the tube drawing process for automobile steering input shaft. First, the CDV(Critical Damage Value) of material is obtained by the compression test and FE-analysis. The occurrence of fracture is estimated by the FE-analysis considering the CDV. In order to achieve the objective of this study, optimization technique and FE-analysis are applied. FPS(Flexible Polyhedron Search) method, which is one of the non-gradient optimization techniques often used in engineering, is used to search optimal die profile. The drawing die profile is represented by Bezier-curve to generate all the possible die profile. Using FPS method and FE-analysis the optimal drawing die profile is determined. To verify tile effectiveness of the redesigned optimal die, the tube drawing experiment is performed. In the experimental result, it is possible to produce sound product without material fracture using the redesigned optimal die.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제9회 단조 심포지엄
• /
• pp.89-94
• /
• 2004

Profile ring rolling process for large slewing rings of alley steels are developed. A profile ring with a round groove located asymmetrically on the outer surface is rolled. The process is simulated by the finite element method. The general-purpose commercial finite element analysis software, MSC.Superform, was used. Experiments are carried in the ring rolling machine and compared with the analysis.

• Tribology and Lubricants
• /
• 제29권6호
• /
• pp.353-359
• /
• 2013

The rollers and/or races in cylindrical and tapered roller bearings should be profiled to relieve high edge stress concentrations caused by their finite lengths and misalignment. In this study, a numerical analysis was performed to investigate the elastohydrodynamic lubrication (EHL) of a Lundberg profile-type cylindrical roller. A finite difference method with fully nonuniform grids and the Newton-Raphson method were used to present detailed EHL pressure distributions and film shapes, as well as the variations in the minimum and central film thicknesses with the profile modification coefficient. In the Lundberg profile, the maximum pressure and minimum film thickness always occurred near the edges. Proper modification of the Lundberg profile considerably increased the minimum film thickness.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.391-402
• /
• 2011

Purpose: The purpose of this study was to investigate the factors affecting oral health impact profile. Methods: Subjects included elderly in the metropolitan areas of the cities of Daegu and Gyeong-buk. Statistical analysis was done using the Statistical Package for Social Sciences version 19.0 for Windows. We determined frequencies and percentage, calculating means, and standard deviations, and determining statistical significance using T-tests, analysis of variance, multiple regression analysis. Results: The results of multiple regression analysis between the oral health impact profile and the related factors indicated that Occupation, Economic status are the major component oral health impact profile in general characteristics and the Impediment of oral health promotion behavior is the major component that contribute the oral health impact profile in oral health belief. Conclusion: The comprehensive and reliable research which measures oral health impact profile of elderly is necessary.

• 한국전기전자재료학회논문지
• /
• 제21권11호
• /
• pp.963-967
• /
• 2008

There are many factors to affect polishing performance normally in chemical mechanical polishing (CMP) process. One of the factors is a pad profile. A pad profile has not been considered as a significant factor. However, a pad profile is easily changed by conditioning process in CMP, and then changed pad profile affects polishing performance. Therefore, understanding how the pad profile is changed by conditioning process is very important. In this paper, through the simulation based on kinematic analysis, the variation of the pad profile was described in accordance with difference condition of conditioning process. A swing-arm type conditioner was applied in this simulation. A swing-arm type conditioner plays a role of generating asperities on pad surface. The conditions of conditioing process to get uniform removal were also investigated by comparing the simulation with the experiment.