• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.2
• /
• pp.108-113
• /
• 2014

This study was conducted to evaluate the performance of Italian ryegrass cultivars for salt tolerance under in vitro condition. Italian ryegrass cultivars such as Greenfarm, Florida80, Kowinearly, and Hwasan101 were tested for their tolerance to various sodium chloride levels (0, 50, 150, 250, and 350 mM). The seed germination, growth, and activities of antioxidant enzymes were investigated under salt treatment. Physiological traits such as seed germination percentage, germination period, shoot and root length, and dry weight were suppressed under entire salt stress conditions. The results indicated that the highest germination percentage and shoot and root length were recorded at normal conditions. Increased sodium chloride levels caused a significant reduction in the seed germination and growth rate. Among the four tested cultivars, Italian ryegrass 'Hwasan101' could be considered as salt tolerant owing to its higher germination percentage, better seedling growth and antioxidant activities under salinity stress, whereas Greenfarm cultivar was more sensitive. The selection of Italian ryegrass cultivars for greater tolerance to saline environment would allow greater productivity from large saline lands.

• Journal of Energy Engineering
• /
• v.26 no.3
• /
• pp.105-112
• /
• 2017

A lot of piping systems have been used from nuclear power systems to water supply systems. The maintenance of the piping systems is needed to ensure proper operation of the piping systems. Failure of the large pipe systems especially such as KDHC(Korea District Heating Corporation) can be a matter directly related to the enterprise productivity and profitability. It can also lead to very important issues in promoting public safety and convenience. Therefore a method of quick and safety repairs have been emerged as the most important problem. In this study, freezing seal isolation method using liquid nitrogen cryogenic refrigerant was developed for the maintenance of a pre insulated heat transport pipe of KDHC with a diameter of 300 mm. In this study, by employing computational analysis techniques we performed the flow and heat transfer analysis for the targeted pre insulated heat transfer pipe and freezing seal jacket(ice-Plug) and have selected for optimal system. The detailed design model based on the results of the computational analysis finally was produced. A laboratory-scale test apparatus were designed and the freezing seal isolation self-test carried out. Also the performance assessment tests in the test bed of KDHC were carried out for on-site application.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.1
• /
• pp.35-41
• /
• 2020

3D laser scanners are an effective way to quickly acquire a large amount of data about an object. Recently, it is used in various fields such as surveying, displacement measurement, 3D data generation of objects, construction of indoor spatial information, and BIM(Building Information Model). In order to utilize the point cloud data acquired through the 3D laser scanner, it is necessary to make the data acquired from many stations through a matching process into one data with a unified coordinate system. However, analytical researches on the accuracy of point cloud data according to the registration method are insufficient. In this study, we tried to analyze the accuracy of registration method of point cloud data acquired through 3D laser scanner. The point cloud data of the study area was acquired by 3D laser scanner, the point cloud data was registered by the ICP(Iterative Closest Point) method and the shape registration method through the data processing, and the accuracy was analyzed by comparing with the total station survey results. As a result of the accuracy evaluation, the ICP and the shape registration method showed 0.002m~0.005m and 0.002m~0.009m difference with the total station performance, respectively, and each registration method showed a deviation of less than 0.01m. Each registration method showed less than 0.01m of variation in the experimental results, which satisfies the 1: 1,000 digital accuracy and it is suggested that the registration of point cloud data using ICP and shape matching can be utilized for constructing spatial information. In the future, matching of point cloud data by shape registration method will contribute to productivity improvement by reducing target installation in the process of building spatial information using 3D laser scanner.

• Management & Information Systems Review
• /
• v.37 no.3
• /
• pp.115-130
• /
• 2018

The purpose of this study is to clarify the relationship between organizational characteristics and information systems characteristics or job satisfaction, attempts to examine the regulatory effects brought about by the adjustment of social capital theory. So far, The results of this study are based on the analysis of individual models from the perspectives of each functional organization such as HR, organization, finance, operation, and MIS. Therefore, this paper attempted a comprehensive analysis of factors affecting job satisfaction and firm performance by presenting an integrated research model of organizational perspectives in addition to the approach of MIS perspective. The characteristics of information system were promptness, CEO support, and compensation. And the organizational characteristics were multiple regression analysis using innovation, trust, and preferential factors. The analysis data is based on sixth data from the HCCP of Korea Productivity Center. According to the analysis results, all the variables had a significant influence on satisfaction, especially CEO support and trust. The analysis of the moderating effect between innovation and job satisfaction was moderated by vision sharing. Only the logistic regression analysis of the satisfaction with the average salary of the members among the demographic variables was statistically significant. Therefore, this study can be concluded that the overall satisfaction level will be improved by recognizing appropriate compensation as sufficient compensation.

• Korean Journal of Agricultural Science
• /
• v.39 no.2
• /
• pp.271-277
• /
• 2012

Dimensions, operation conditions and improvement items for round roof windows were investigated in arch shape single-span plastic greenhouse with roof vents, and natural ventilation performance was analyzed based on the ventilation theory. Diameter of round roof windows was mostly 60 cm, and chimney height projected on roof was average 30 cm. Installation space was mostly 5 to 6 m but farmhouse of 10 m and over was 16.7% also. A round roof window which has 60 cm diameter was installed to 6 m space generally and 80 cm diameter was installed to 10 m space, but correct standards did not exist. There were a lot of opinions that ventilation effect of round roof windows is fairly good and user satisfaction is generally excellent. It is problem that there is few effects in summer and that vinyl around each vent tears well and rainwater leaks, and improvement hope item required development of automatic control system. In the wind speed of 0.3 m/s, it was estimated that natural ventilation rates were 0.69, 0.55, 0.50 and 0.48 volumes per minute in case of 2, 4, 6 and 8 m installation space for round roof windows, respectively. It was analyzed that the ratio of ventilation due to buoyancy out of total ventilation were 65.2, 41.9, 29.9 and 22.8% in case of 2, 4, 6 and 8m installation space, respectively. By the round roof windows installed at space of 6 m, ventilation rate was estimated to 0.5 volumes per minute, and we can expect the increase in ventilation rate of 30%. In order to meet the recommended ventilation rate for summer season, we have to install the round roof windows at space of 1 to 2 m. However, it is difficult to apply those installation space because of falling productivity due to lower light transmittance as well as rising costs. It is estimated that the installation space of 6m is appropriate for spring or fall season. Therefore it is necessary to encourage installing the roof windows in single-span plastic greenhouses.

• Clean Technology
• /
• v.23 no.2
• /
• pp.163-171
• /
• 2017

Currently, researches on recycling and reuse of waste energetic materials have recently gained a great attention from advanced countries due to ever tightening environmental regulations. In this study, as a part of a recycling technology, the experiments and dynamic simulation of simulated moving bed (SMB) process were performed to efficiently separate TNT and RDX from their mixture, which are main components of ammunition. In order to determine the operation zone of SMB process, the retention times of TNT and RDX were measured using HPLC at different flow rates and the adsorption equilibrium of each component was obtained by using a moment method. According to the adsorption equilibrium and the triangle theory of SMB process, four operation points were determined and separation experiments were carried out by the SMB process using the solvent consisting of acetonitrile and water. Two different mixing ratios (6:4 and 1:1) of acetonitrile and water were chosen for the experiment due to the great impact of mixing ratio of the solvent on separation. The performance of SMB process was evaluated by purity, recovery, productivity and solvent consumption. Pure TNT and RDX were successfully obtained from the SMB process and the dynamic simulation for the SMB process agreed well with the experimental results. Therefore, the dynamic model could be applied for predicting the dynamic behavior of the SMB process and designing a large scale SMB process.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.5
• /
• pp.175-187
• /
• 2013

Each participant in building construction project requires their own workspace to execute their activities. In this environment, inappropriate workspace planning in construction site causes workspace conflicts which result in a loss of productivity, safety hazard and poor-quality issues. Therefore, workspace should be regarded as one of the most important resources and constraints have to be managed at construction site. However, current construction planning techniques such as Gantt chart, network diagram and critical path method have proven to be insufficient to workspace planning. This paper contains formalized process for workspace planning in 4D BIM environment to prevent workspace related problems in construction project. The proposed process in this paper represents workspace occupation status for each activity and suitable solutions for identified workspace conflicts by integrating workspace attributes and activity execution plan. Based on the result of this study, project manager will be able to prevent probable workspace conflicts and negative effect on project performance by devising appropriate workspace plan during preconstruction phase.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.1
• /
• pp.102-112
• /
• 2003

The objective of this study was to investigate the effects of food waste and probiotics supplementation on productive performance and egg composition of laying hens. Total 120 layers (Brown Tetran) 22 weeks old were divided into five groups with 4 replicates for each treatments and raised in battery cage. The experimental design was completely randomized. The egg Production rate was significantly increased in layer supplemented with 0%, 0.5%, 1.0% and 1.5% of probiotic supplemented diets compared to control (P<0.05). At feeding with food waste and probiotic supplementation had no effect on the egg shell strength (P>0.05). Haugh unit of the eggs was significantly increased in layers fed with 1.5% of probiotic supplemented diet (P<0.05). The different levels of inclusion of the food waste and probiotic supplementation had not effect on egg shell color, blood spot and albumen index of the eggs (P<0.05). There were not significant differences in over all acceptability, juiciness, texture and color of the eggs from layer fed with different levels of wood waste and probiotic supplementation. The appearance and flavor significantly deteriorated in eggs from layers fed with probiotic diets compared to control (P<0.05).

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.196-204
• /
• 1997

우리 나라는 한해에 안전사고로 인해 12만 .+-. 2만명정도의 재해자를 발생시키고 있으며, 재해의 천국이라는 오명까지 얻게 되었다. 따라서 본 연구는 우리나라의 산업안전관리자의 안전의식을 분석함으로써 재해발생의 감소에 일조를 하고자 함을 본 연구의 목적으로 한다. 연구기간은 1997년 3월에서 8월까지며, 총 200여명의 강원지역의 산업안전관리자들을 대상 으로 설문조사하여, 그중 불성실하게 답한 것을 제외한 183명의 관리자들의 응답결과를 토 대로 통계분석을 실시하였다. 연구내용은 안전의식에 대한 설문조사를 통하여 그들의 근무 조건과 안전에 대한 지식정도, 현 직장에의 만족과 불만족요인과 자주 쓰는 재해통해방법들을 조사하여 우리나라의 안전관리자들의 현 상황을 유추해 보고자 시도하였다. 분석결과 183명 중 여성은 불과 3명뿐이며, 83%가 기혼이며, 대졸은 전체의 25.1%이며, 59.6%가 고졸이며 , 전문대졸은 15.2%나 되었다. 전담 안전관리자는 전체의 8%에 불과했으며, 대부분 겸임을 하고 있었다. 놀라운 것은 안전관리자들의 92.6%가 안전관리자격증이 없었으며, 2급이 4.7% 에 불과했다. 과거에 부상을 당한 경험이 있는 안전관리자는 전체의 26.3%에 달해 회사가 부상을 당한 근로자를 안전부서로 발령한다는 사실을 확인할 수 있었다. 다친 원인의 50%가 시설물 결함으로 나타나 작업환경개선이 시급함을 알 수가 있었다. 우리나라도 선진국과 같은 교욱담당의 NIOSH와 제재담당의 OSHA와 같은 기관의 설립이 보다 효율적이고 근본적인 안전 관리의 문제해결책이라고 사료된다. 열악한 중소기업에 나라에서 안전교육을 담당해 주는 대신 기업은 근로자들에게 보다 안전한 환경을 제공해야 된다는 것이 이러한 기관설립의 목적이라고 하겠다. 더 나아가 이를 총괄하는 안전관리청의 신설이 보다 근본적인 문제해결을 제공해 줄 수 있을 것으로 사료된다.의 결과는 자전거 에르고노미터의 결과가 트레드밀의 결과에 87.60%정도 나타났다.음을 관찰하였다. 특히 vitamin C와 E의 병용투여는 상승적으로 적용하여 간세포손상을 더욱 억제시킴을 알 수 있었다.mance and on TFP(Total Factor Productivity) growth which is a pure measure of firm performance. To utilize the advantage of panel data, FEM(Fixed Effect Model) and REM(Random Effect Model) were used. The empirical result shows that the entropy index as a measurement of inter-business relatedness is not significant but technological relatedness index is significant. OLS estimates on pooled data were considerably different from FEM or REM estimates on panel data. By introducing interaction effect among the three variables for business portfolio properties, we obtained three findings. First, only VI (Vertical integration) has a significant positive correlation with ROS. Second, when using TFP growth as an dependent variable, both TR(Technological Relatedness) and f[ are significant and positively related to the

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.142-151
• /
• 1997

본 연구는 주부들의 주활동공간인 부엌가구와 공간의 설계에 있어사용하기 편리하며 가사활동에 따 른 피로를 경감시키고 요통과 같은 주부직업병을 예방할 수 있는 부엌가구와 공간의 개발에 그 목적을 두었다. 연구는 먼저 수도권의 32평형 규모의 아파트150가구를 대상으로 설문조사를 실시하였으며, 만 24시간동안의 실제 가사활동을 Video로 촬영하여 동작분석을 실시하였다. 그 결과 주부들은 수납의 용 이성과 공간의 크기, 작업대의 높이 등을 가장 많은 개선사항으로 지적하였으며, 절반이상의 주부들이 앉은 자세에서 작업이 이루어졌으면 좋겠다고 응답하였다. 또한 동작분석 결과 작업의 70%이상이 개수 대를 중심으로 조리대와 가열대 주변의 한정된 공간에서정적으로 선 자세에서이루어지는 것으로 파악 되었다. 이러한 선 자세에서의 작업에 따른 피로도를 감소시키기 위하여 입좌식 의자를 도입하였으며, 개수대를 씽크대의 'ㄱ'자 코너에 위치하여 주방활동시의 이동거리를 단축하고자 하였다. 피로도의 경감 을 측정하기 위하여 입좌식 의자를 도입한 개선된 씽크대와 기존의 입식씽크대에서 가사활동시 요구되는 주부들의 에너지 대사량을 비교하기 위하여 심장박동수와 산소호흡량을 측정하였다. 실험결과에 따르면 주방에 입좌식의자를 도입한 경우가 가사활동에 요구되는 에너지 소모량이 심장박동수와 산소호흡량의 기준에서 각각 평균적으로 30%와 57.5% 이상이 감소하는 것으로 파악되어 이러한 부엌가구의 도입으로 주부들의 가사활동에따른 피로도가 절반 가까이 감소될 수 있음을 니타내었다. 또한 부엌가구의 재배치 에따른 가사활동시 이동거리가 평균적으로5.5%이상이 감소하는 것으로 나타났다. 본 연구결과를 주방설 계에 적용할 경우 가사활동의 효율성과 편리성이 향샹됨은 물론 가사활동에따른 피로도를 경감 시키고 요통 등의 주부직업병을 예방할 수 있을 것으로 기대된다.1일 1회씩 4회 투여한 군에서도 암수에 상관없이 전 농도 군에서 염색체이상을 나타내지 않아 유전독성을 나타내지 않음을 관찰하였다. 특히 vitamin C와 E의 병용투여는 상승적으로 적용하여 간세포손상을 더욱 억제시킴을 알 수 있었다.mance and on TFP(Total Factor Productivity) growth which is a pure measure of firm performance. To utilize the advantage of panel data, FEM(Fixed Effect Model) and REM(Random Effect Model) were used. The empirical result shows that the entropy index as a measurement of inter-business relatedness is not significant but technological relatedness index is significant. OLS estimates on pooled data were considerably different from FEM or REM estimates on panel data. By introducing interaction effect among the three variables for business portfolio properties, we obtained three findings. First, only VI (Vertical integration) has a significant positive correlation with ROS. Second, when using TFP growth as an dependent variable, both TR(Technological Relatedness) and f[ are signif