• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.256-261
• /
• 2014

Endurance test procedures of multipurpose tactical vehicle is constructed by comparing the Korea defence standard and TOP-2-2-506. The plan was to make the best reflect the operational environment and the actual production purposes. Endurance test of multipurpose tactical vehicle more stringent than the existing other military vehicles validation procedures. But the test plan, it is possible to reduce the cost and schedule of long verification that occurs because of the Endurance test. Through a comparison of the dynamic characteristic analysis, change of test center was to ensure the reliability and validity.

• 한국유기농업학회지
• /
• 제16권4호
• /
• pp.349-366
• /
• 2008

The EU recently adopted the policy for organic food and farming, Even though the EU enacted a regulation for organic farming in 1991, there has been no formal policy for supporting organic farming in the EU. This may mean that the EU regards the organic food and farming as an important sector for the future of European farming. Therefore, this study firstly explores the development processes and current situation of the EU organic food and farming policy, and then summaries the priorities of the EU organic food and farming sector. These were reflected to make up an action plan and a new regulation for the EU organic food and farming. The main features of the recent change in the EU policy would be the application of comprehensive perspective for dealing with organic food and farming issues.

• Industrial Engineering and Management Systems
• /
• 제9권1호
• /
• pp.54-59
• /
• 2010

A two-plan sampling system is proposed for a failure-censored life testing when the lifetime follows a Weibull distribution with known shape parameter. The proposed sampling system is based on a switching rule, for switching between the tightened and the normal inspection levels when lots are submitted for inspection in the order of production or in some other systematic way. The design parameters of the proposed sampling system are determined by the two-point approach considering the producer's risks and the consumer's at the specified acceptable reliability level and the lot tolerance reliability level, respectively. It has been observed that the proposed system requires only a single failure for the observation.

• 한국컴퓨터정보학회논문지
• /
• 제23권2호
• /
• pp.77-82
• /
• 2018

In this paper, we propose an improvement plan to increase the learning effect and satisfaction through the PBL - related video design class. PBL To prepare for the Fourth Industrial Revolution era, we must acquire diverse knowledge and skills to discover problems and solve them creatively. Therefore, various learning methods are being studied, and one of them is PBL learning. PBL is a learner-centered education that explores problems that may arise from specific topics other than existing curriculum-based education methods and finds solutions to problems. In this study, two lectures on video design related to video contents and image contents were taught in PBL class, and PBL class problem was analyzed and the improvement plan was studied.

• 전기학회논문지
• /
• 제60권4호
• /
• pp.726-732
• /
• 2011

To establish the transmission system expansion plan based on reliability, valuation of outage cost become more important. In previous studies about outage cost estimation, macroscopic, microscopic and analytic methods are proposed but they have some limit. For instance, microscopic method involves a complex field survey process and macroscopic method can not estimate regional outage cost. So in this paper, a new method to estimate regional macroscopic outage cost using the reduction of value added due to power outages is proposed. This method uses regional add value according to production activities called Gross Regional Domestic Product(GRDP) and regional electricity sales.

• 한국컴퓨터산업학회논문지
• /
• 제10권1호
• /
• pp.1-12
• /
• 2009

이 논문은 설계자동화로 강판절단 과정에 필요한 도면과 도면정보를 데이터베이스로 구축함으로써 도면을 효율적으로 관리하고, 검색함으로써 기존의 설계방식에 비해 경제성과 생산성 측면에서 보다 효율적이고 사용자의 편리성에서 매우 유리하며, 또한 수정도 용이하게 수행할 수 있다. 본 논문에서는 이러한 필요성에 기반을 두고 관계 데이터 모델의 개념을 정립하여 강판 제작에 따른 도면 정보를 위한 미디어 데이터 형식을 설계하였고, 사용자 인터페이스를 위한 질의 환경을 설계하였으며, 도면 관리시스템을 이용하여 실제 구현되는 과정을 자세히 소개하였다.

• 국토계획
• /
• 제53권7호
• /
• pp.67-86
• /
• 2018

This paper attempted to analyze impacts of transition in electricity generation system on a national economy and environmental level in Korea using a recursive computable general equilibrium(CGE) model. In particular, the paper presented a hybrid model combining the top-down CGE model with the bottom-up model which describes the structure of electricity production in detail. The impacts were analyzed by two policy scenarios base on the basic plan for electricity supply and demand proposed by the Korean government. As a result, the paper specifically showed that there exists a trade-off relationship in the policy-making between economic efficiency and environmental level. The paper also suggested that the transition in electricity generation system should be done more gradually and carefully.

• Nuclear Engineering and Technology
• /
• 제39권2호
• /
• pp.111-122
• /
• 2007

The current energy supply system is burdened by environmental and supply problems. The concept of a hydrogen economy has been actively discussed worldwide. KAERI has set up a plan to demonstrate massive production of hydrogen using a VHTR by the early 2020s. The technological gap to meet this goal was identified during the past few years. The hydrogen production process, a process heat exchanger, the efficiency of an I/S thermochemical cycle, the manufacturing of components, the analysis tools of VHTR, and a coated particle fuel are key areas that require urgent development. Candidate NHDD plant designs based on a 200 MWth VHTR core and I/S thermochemical process have been studied and some of analysis results are presented in this paper.

• Industrial Engineering and Management Systems
• /
• 제8권3호
• /
• pp.131-138
• /
• 2009

The variable sampling inspection scheme with screening for the purpose of assuring the upper limit of maximum expected surplus loss after inspection has been proposed. In this inspection scheme, it has been assumed that a product lot consists of products manufactured through a single production line and lot quality characteristics follow a normal distribution. In the previous literature with respect to inspection schemes, it has been commonly assumed that lot quality characteristics obey a single normal distribution under the condition that all products are manufactured in the same condition. On the other hand, the production line is designed in order that the workload of respective processes becomes uniform from the viewpoint of line balancing. One of the solutions for the bottleneck process is to arrange the workshops in parallel. The lot quality characteristics from such a production line with the process consisting of some parallel workshops might not follow strictly the single normal distribution. Therefore, we expand an applicable scope of the above mentioned variable sampling inspection scheme with screening in this article. Concretely, we consider the variable sampling inspection with screening for the purpose of assuring the upper limit of average outgoing surplus quality loss in the production lots when the lot quality follows the mixed normal distribution.

• 한국환경과학회지
• /
• 제29권2호
• /
• pp.155-166
• /
• 2020

This study was conducted to analyze the current situation of the logging operation system and to suggest an effective policy plan to secure important raw materials for the use of forest biomass. The dissemination of forestry mechanization and the establishment of the logging operation are important tasks to establish a system and reduce costs of timber production by increasing the use of forest biomass; this includes increasing the supply of timber for domestic products and increasing the production of wood chips and wood pellets. In particular, the efficiency of steep-slopes catenary system machinery for yarding such as tower-yarder and swing-yarder should be urgently supplied to cope with forest production and supply of forest biomass energy resources. In addition, it is necessary to continuously promote the dissemination of high-performance forestry machinery as is being done in Japan. At the same time, instead of distributing or retaining the spread of forestry machinery to the state and local governments, it is necessary to distribute timber production work centered on forest cooperatives or private timber producers to be carried out by wood producers, forest cooperatives and individuals.