• Journal of Microbiology and Biotechnology
• /
• v.22 no.1
• /
• pp.92-99
• /
• 2012

The optimal physical factors affecting enzyme production in an airlift fermenter have not been studied so far. Therefore, the physical parameters such as aeration rate, pH, and temperature affecting PLA-degrading enzyme production by Actinomadura keratinilytica strain T16-1 in a 3 l airlift fermenter were investigated. The response surface methodology (RSM) was used to optimize PLA-degrading enzyme production by implementing the central composite design. The optimal conditions for higher production of PLA-degrading enzyme were aeration rate of 0.43 vvm, pH of 6.85, and temperature at $46^{\circ}C$. Under these conditions, the model predicted a PLA-degrading activity of 254 U/ml. Verification of the optimization showed that PLA-degrading enzyme production of 257 U/ml was observed after 3 days cultivation under the optimal conditions in a 3 l airlift fermenter. The production under the optimized condition in the airlift fermenter was higher than un-optimized condition by 1.7 folds and 12 folds with un-optimized medium or condition in shake flasks. This is the first report on the optimization of environmental conditions for improvement of PLA-degrading enzyme production in a 3 l airlift fermenter by using a statistical analysis method. Moreover, the crude PLA-degrading enzyme could be adsorbed to the substrate and degraded PLA powder to produce lactic acid as degradation products. Therefore, this incident indicates that PLA-degrading enzyme produced by Actinomadura keratinilytica NBRC 104111 strain T16-1 has a potential to degrade PLA to lactic acid as a monomer and can be used for the recycle of PLA polymer.

• YAKHAK HOEJI
• /
• v.38 no.5
• /
• pp.614-620
• /
• 1994

Following the study on the fermentation conditions influencing the production of vitamin $B_{12}$ by Propionibacterium shermanii(Korean J Biotechnol. Bioeng. 7,126-131, 1992), the effects of some factors supplemented in the medium on the production of vitamin $B_{12}$ were studied. Maximum production of vitamin $B_{12}$ was observed when $Co^{+2}$ was supplemented at the concentration of 2-4 ppm in the fermentation medium. Increase of the supplemented $Co^{+2}$ to 12 ppm did not inhibit the growth of the organism, but it accelerated the lysis of the organism. In the literature, peptone was reported to activate the biosynthesis of vitamin $B_{12}$. Examination of the effect of peptone on the growth and the production of vitamin $B_{12}$ showed that at early stage more vitamin$B_{12}$ was observed in the supplemented medium, but no difference was observed in the later stage of fermentation. Examination of the time for addition and the amount of 5,6-dimethylbenzimidazole, a precursor known to influence the production of vitamin $B_{12}$, showed that a maximum yield of vitamin $B_{12}$ was observed when 15 mg/L was added to the fermentation medium after 2 days' incubation. The effect was comparable with the increase of the production of vitamin $B_{12}$ when the fermentation condition was changed to aerobic condition after 2 days' culture under anaerobic condition.

• Applied Biological Chemistry
• /
• v.48 no.3
• /
• pp.207-211
• /
• 2005

The metabolites released from cultures of rhizosphere bacteria can inhibit plant growth. Bacillus subtilis IJ-31 inhibited plant growth by the production of hydrocinnamic acid (HCA). The production of HCA by plant-growth inhibiting rhizobacterium B. subtilis IJ-31 was optimized. $90.5\;{\mu}g/ml$ of HCA was obtained under the condition of 1% rice bran as carbon source, 0.5% tryptone as nitrogen source, 0.1% $ZnCl_2$ as metal source at $37^{\circ}C$ for 60 h (pH 7.0). The optimal condition for the HCA production by B. subtilis IJ-31 in the jar fermenter was established using response surface methodology (RSM) of statistical analysis system(SAS) program. The production of HCA by B. subtilis IJ-31 in the jar fermenter culture reached $102.99\;{\mu}g/ml$ when 2.24% soil extracts was added and agitation speed was 290 rpm under the same condition. And the experimental value of HCA production is $102.5\;{\mu}g/ml$ in the same culture condition. The production of HCA by B. subtilis IJ-31 is higher as 12% than that from the flask culture.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.36
• /
• pp.219-232
• /
• 1995

Even though Just-In-Time Production System is introduced to industry in order to strengthen competition, applying this production system to field is hard and some problems are occurred. On this study, the algorithm which become smoothed production, one of the prerequisite condition for implementing Just-In-Time, are developed. On the other word. it is possible to become smoothed production based on keeping Lot Production System. The possibility of establishing more stable smoothed production scheduling are proved on this study by comparing with previous researches.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.111-117
• /
• 2002

In most machining companies, operators decide the cutting condition, a pair of spindle speed (5) and table federate (F) by experience and subjective judgment. As cutting conditions are determined by operators' experience and ability, inconsistent cutting conditions are given in same operating conditions. The objective of this study is to develop the cutting condition decision system which utilizes shop data and predicts tool life by neural network and eventually leads to the optimal cutting condition. The production time per piece is considered for an optimization object. We will discuss the process of an optimal cutting condition decision by neural network. By this process, a series of shop data is stored. And neural network is constructed for prediction of tool life and the optimal cutting condition is recommended from a cutting condition decision system using the stored shop data. The results show that the developed system is rational in searching the optimal cutting conditions on job operations.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.131-135
• /
• 2002

Acetobacter xylinum KJ1 efficiently producing bacterial cellulose(BC) in shaking culture was isolated from a rotten grape. The strain was used to investigate optimum operating conditions for increasing BC production and factorial design model was employed for the optimization. The results of experiments were statistically analyzed by SAS program. Reciprocal effects of each factors(carbon source concentration, shaking speeds(rpm), oxygen pressure, and CSL concentration) and culture condition of BC production were examined by getting regression equation of the dependent variable. Comparisons between experimental results and predicted results about BC concentration were done in total 24 experiments by combination of each factors using SAS program, and the correlation coefficients of BC concentration and BC yield were 0.91 and 0.81, respectively. The agitated cultures were performed in various operation conditions of factors which affected considerably to BC production in jar fermentor. The results showed that BC concentration was 11.67g/ L in 80 hours cultivation under the condition of carbon source concentration shaking speeds(rpm) : oxygen pressure: CSL concentration = 4% : 460rpm : 0.28 : 6%. On the other hand BC yield was 0.42g/g in 80 hours cultivation under the condition of carbon source concentration shaking speeds(rpm) : oxygen pressure: CSL concentration = 4% : 564rpm : 0.21 : 2%. The BC production could be enhanced up to more than 65.3% by factorial design. The result of a verifying experiment under the optimal conditions determined by the factorial design to the BC production showed that the model was appropriate by obtaining BC concentration of 11.02g/L in the optimum condition

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2004

This study intend to make easy modification, even if there is a new job or structure change, by modularizing program and computerize and automation of production control management used in CIM. under the condition where manager control production on the job-site, for increasing connection with other operation and management on the computer by monitoring center computer, recognizing information by computer is needed, it is possible by converting transaction. So this study goal is to make delivery control and order control fast and accurate by finding dynamic history of machine and production information in enterprise without input production and quality information by themselves with quality information system. So production increase and quality improvement are possible by diminishing manager's and producer's work with the result of the study combining POP and CIM, after that, in e-business and m-business period that every enterprise must pass, customer satisfaction and sales promotion are possible with employee's computerizing minds. these study result also can knowledge process condition with theoretical class and have a power in finding a solution with foundation of theoretical knowledge.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.4
• /
• pp.397-403
• /
• 2012

Galactose, an isomer of glucose with an opposite hydroxyl group at the 4-carbon, is a major fermentable sugar in various promising feedstock for hydrogen production including red algal biomass. In this study, hydrogen production characteristics of galactose-glucose mixture were investigated using batch fermentation experiments with heat-treated digester sludge as inoclua. Galactose showed a hydogen yield compatible with glucose. However, more complicated metabolic steps for galactose utilization caused a slower hydrogen production rate. The existence of glucose aggravated the hydrogen production rate, which would result from the regulation of galactose-utilizing enzymes by glucose. Hydrogen produciton rate at galactose to glucose ratio of 8:2 or 6:4 was 67% of the production rate for galactose and 33% for glucose, which could need approximately 1.5 and 3 times longer hydraulic retention time than galacgtose only condition and glucose only condition, respectively, in continuous fermentation. Hydrogen production rate, Hydrogen yield, and organic acid production at galactose to glucose ratio of 8:2 or 6:4 were 0.14 mL H2/mL/hr, 0.78 mol $H_2$/mol sugar, and 11.89 g COD/L, respectively. Galactose-rich biomass could be usable for hydogen fermenation, however, the fermentation time should be allowed enough.

• Journal of Embryo Transfer
• /
• v.12 no.1
• /
• pp.49-56
• /
• 1997

This study was carried out to establish an effective and practical system for commercialization of embryo production techniques by analyzing several factors influencing in vivo embryo production on condition of donors treated FSH-P and SUPER-OV in Korean native cattle. In vivo embryos were flushed 226 times from 128 donors. The results obtained for the factors influencing in vivo embryo production by conditionof donors treated FSH-P and SUPER-OV were as follows :1. Age and parity of donors did not affect the transferable and freezable embryos among the treatments in FSH-P but the transferable and freezable embryos were decreased after 6 years old and 4th parity in SUPER-OV(P<0.01). 2. The production of embryos on the weight of donors was higher in over 400kg of body weight in FSH-P(P<0.01) and was higher in over 450kg than 400~450kg of body weight in SUPER-OV(P<0.05). For FSH-P embryo production was better responded in 350~450kg of body weight with 30~32mg doses, and showed a better result in over 450kg body weight with 32~34mg doses.(Key Words : in vivo embryo, donors, FSH-P SUPER-OV)

• Journal of Microbiology and Biotechnology
• /
• v.24 no.2
• /
• pp.209-216
• /
• 2014

The efficiency of gamma irradiation (0, 1, 5, 10, 15, 20, and 30 kGy) as a sterilization method of corn samples (30 g) artificially contaminated with Fusarium moniliforme stored at normal condition ($25^{\circ}C$ with approximate relative humidity (RH) of 55%) and optimal condition ($25^{\circ}C$ with a controlled RH of 97%) was studied. The results showed that the fungal growth and the amount of fumonisin were decreased as the dose of gamma irradiation increased. Gamma irradiation at 1-5 kGy treatment significantly inhibited the growth of F. moniliforme by 1-2 log reduction on corn samples (P < 0.05). Sublethal effect of gamma irradiation was observed at 10-20 kGy doses after storage, and a complete inactivation required 30 kGy. Fungal growth and fumonisin production increased with higher humidity and longer storage time in all corn samples. This study also demonstrated that there was no strict correlation between fungal growth and fumonisin production. Storage at normal condition significantly resulted in lower growth and fumonisin production of F. moniliforme as compared with those stored at optimal condition (P < 0.05). Gamma irradiation with the dose of ${\geq}5$ kGy followed by storage at normal condition successfully prolonged the shelf life of irradiated corns, intended for human and animal consumptions, up to 7 weeks.