• Journal of the Korea Safety Management & Science
• /
• v.6 no.4
• /
• pp.61-81
• /
• 2004

What is the most important in articles of food is hygienic safety. Because food Is the most common thing in our everyday life, however, the importance of its hygienic safety and other many problems caused by food may be easily neglected. What is more, food is can be dangerous as much as it is directly related to human life and accidents from the same cause may have different effects on the victims according to physical and environmental differences of individuals. Thus PL action for food requires more thorough prevention and measure. Korea has been enforcing 'the Product Liability Act' since the 1/sup 1st/ of July 2002. Product Liability (PL) is liability of the manufacturer or the seller of a product to compensate for the death or injury of consumers or the loss of properties caused by the defect of the product. This study surveyed consumers' response to and the effects of the enforcement of the Product Liability Act, investigated how consumers perceived the importance of food safety and the risk of defective food based on PL standards and their experience in damage by food through a questionnaire survey, and analyzed collected data through empirical analyses (reliability analysis, factorial analysis, regression analysis and ANOVA t-test) using SPSS 10.0. Based on the results of analysis, the researcher proposed strategies for coping with the Product Liability Act in the food industry.

• Safety and Health at Work
• /
• v.13 no.3
• /
• pp.343-349
• /
• 2022

Background: In the United States, the dairy product manufacturing industry has consistently had higher rates of work-related nonfatal injuries and illnesses compared to the national average for industries in all sectors. The selection and implementation of appropriate safety performance indicators are important aspect of reducing risk within safety management systems. This study examined the leading safety indicators implemented in the dairy product-manufacturing sector (NAICS 3115) and their perceived effectiveness in reducing work-related injuries. Methods: Perceptions were collected from individuals with safety responsibilities in the dairy product manufacturing facilities. OSHA Incident Rate (OIR) and Days away, restricted and transferred (DART) rates from 2013 to 2018 were analyzed. Results: The perceived most effective leading were safety observations, stop work authority, near miss reporting, safety audits, preventative maintenance, safety inspections, safety training attendance, and job hazard analysis/safety analysis, respectively. The 6-year trend analysis showed that those implementing all eight top indicators had a slightly lower rates than those that did not implement all eight. Production focused mentality, poor training, and lack of management commitment were perceived as the leading causes of injuries in this industry. Conclusion: Collecting leading indicators with the unique interest to meet the regulatory requirements and to document the management system without the actual goal of using them as input to improve the system most probably will not lead to an effective reduction of negative safety outcomes. For leading indicators to be effective, they should be properly selected, executed, periodically evaluated and actions are taken when necessary.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.3
• /
• pp.151-169
• /
• 2000

Product Liability(P.L) is designed for system which charge with a compensation for demages that has nothing to do with whether manufacturer make a mistake or not in that case suffer heavy losses anyone of body or property by defect of product. Now and then, most people interest of safety of product and main countries already carry out Product Liability. This paper analyzes newly studied cases by defects, products, countries in Korea and some developed countries (USA and Japan mainly) in order to prepare for Product Liability, which will be enforced on July 1, 2002 in Korea. Before P.L. began to enforce, many cases have happened and resulted in sues. Therfore, each country have revised the current P.L. after many trials and errors. From this respect, the cases of other countries and Korea will be compared and analyzed.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.2
• /
• pp.57-69
• /
• 2000

Beginning from July. 2000, the product liability of Korea is designed for reduction of customer loss by defective products. Therefore, most of company are supposed to be ready for taking care of safety and quality of products. ISO9001：2000 quality management system reform to emphasize continual improvement of the process with customer satisfaction. First of all, this paper start with introduction motive of the product liability and examine distinctive mark of the ISO9001：2000 quality management system. We consider the correlation between ISO9001：2000 quality management system and product liability and would like to propose product liability prevention by ISO9001：2000 quality management system with classification a defect style of product, the management guide and the law case.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.04a
• /
• pp.331-336
• /
• 2009

Recently Environmental issues is Product development for ease of disassembly and recycling requires methodical toolboxes and respective infrastructures of information and communication technology. Therefore, today's designers have a very high level of product responsibility as disassembly is a major cost factor of product recycling. A study on the product redesign Methods and tools for sustainable management.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.3
• /
• pp.141-150
• /
• 2000

This study aim is analysis device development for design of experiment with calcium chloride relation used a hardener to search cause of product crack, product reliability improvement building data-base program for computer system of mixture rate, product improvement, and new product development.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.1
• /
• pp.201-217
• /
• 2004

In this research, OIL (Ontology Inference Layer), one of the ontology language, is applied for classifying product data systematically, defining concepts, and establishing relationship between concepts. By transforming steel product data into XML documentation and managing them, knowledge management based on the logical structure of documents is possible.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.11a
• /
• pp.319-322
• /
• 2007

This paper presents geometrical product specifications of acceptance and verification tests for coordinate measuring machines(CMM). These specifications include vocabulary, measuring size, rotary table with fourth axis, scanning measuring mode, multiple-stylus probing systems, measuring, and, estimation of errors in computing Gaussian associated features.

• Journal of Drive and Control
• /
• v.20 no.3
• /
• pp.42-49
• /
• 2023

In this study, the safety of fastening device for the agricultural by-product collector was evaluated according to the driving ground conditions by deriving the stress, static safety factor, and fatigue life using dynamic simulation. A 3D modeling of agricultural by-product collector was carried out, and simulation model was developed by applying the material properties. As a result of dynamic simulation, the magnitude of the maximum stress generated in the fastening device was the highest when driving on the flat off-road, followed by sloped pave-road and flat pave-road. Static safety factor and fatigue life were the highest when driving on the flat pave-road, followed by sloped pave-road and flat off-road. The safety of fastening device was confirmed that static safety factor was more than 1.0 and service life exceeded 9 years in all driving ground conditions.

• Journal of the Ergonomics Society of Korea
• /
• v.23 no.3
• /
• pp.53-72
• /
• 2004

Today we are observing a lot of injuries, casualties, and property losses that are mainly caused by the defects of products. In order to derive safety designs, which minimize the possibility of such product liability-related accidents, we need to take into account the user-product interaction as an important part of the danger factor analysis. Existing risk analysis techniques, however, have some limitations in detecting comprehensive danger factors that are peculiarly involved in human errors and the functional defects of products. Researches on danger factor analysis regarding the user-product interaction have been carried out actively in ergonomics. In this paper, we suggest a novel product risk analysis technique, which is more objective and systematic compared to the previous ones, by combining a modified TAFEI (Task Analysis For Error Identification) technique with SASA (Systematic Approach to Accident Scenario Analysis) technique. By applying this technique to the product design practice in industry, corporations will be able to improve the product safety, consequently strengthening the competitiveness.