• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.6
• /
• pp.90-101
• /
• 2008

Korean defense specifications are the technical criteria of military products and major factor of acquisition system. Weapon systems and acquisition technique have been advanced dramatically after 1990's, but Korean defense specification practice standard has stayed after early 1980's except embedded software. The current status of current Korean defense specification practice standard and trend of related design and acquisition techniques like M&S, SBA, and digital manufacturing have been reviewed. This paper suggests that transfer to product, IT oriented specification structure, adaptation of digital product model and reinforcement of engineering management systems to establish a development initiative of Korean defense specification practice standard.

• Nutritional Sciences
• /
• v.3 no.2
• /
• pp.71-76
• /
• 2000

Effects of extrusion processing on zinc bioavailability in a product made from 85% semolina and 15% soy protein concentrate were determined using in vitro and in vivo techniques. Soluble and dialyzable zinc contents of the extruded product were 15.3 and 13.0 $\mu$g/g, respectively, compared to 15.6 to 15.0$\mu$g/g in the raw (unprocessed) ingredients. Zinc bioavailability in diets in which all of the zinc (14ppm) was provided either by the extruded product or by its raw ingredients was determined in two groups of male Sprague Dawley rats. No differences were found in concentrations of zinc in plasma, liver and femur between rats fed the two experimental diets. Apparent zinc digestibility was similar for both diets. These results are consistent with the in vitro results showing no effect of extrusion processing on zinc bioavailability.

• East Asian mathematical journal
• /
• v.36 no.1
• /
• pp.61-71
• /
• 2020

Up to the present day, the best solution we can get to the truncated moment problem (TMP) is probably the Flat Extension Theorem. It says that if the corresponding moment matrix of a moment sequence admits a rank-preserving positive extension, then the sequence has a representing measure. However, constructing a flat extension for most higher-order moment sequences cannot be executed easily because it requires to allow many parameters. Recently, the author has considered various decompositions of a moment matrix to find a solution to TMP instead of an extension. Using a new approach with the Hadamard product, the author would like to introduce more techniques related to moment matrix decompositions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.38-41
• /
• 2003

Better understanding and sharing information are getting important to manage interdisciplinary product development team in a globally-distributed company. This study propose a solution to implement RPD(Rapid Product Development) system, focusing on rapid production process, for better understanding between development team members in different place and easy sharing of product information. The system developed by this research shows that SOAP(Simple Object Access Protocol) operates in distributed environment more efficiently than other RPC(Remote Procedure Call) techniques and it does not respond sensitively to firewall. And SOAP is an excellent RPC and messaging technique to exchange structured data. Procedures developed with use of SOAP are worked together with web, and users can use remote services as an application program in their computer.

• Journal of Integrative Natural Science
• /
• v.11 no.2
• /
• pp.76-81
• /
• 2018

Robust design is an approach to reducing performance variation of quality characteristic values in quality engineering. Product array approach which is used in the Taguchi parameter design has a number of advantages by considering the noise factor. Taguchi has an idea that mean and variation are handled simultaneously to reduce the expected loss in products and processes. Taguchi has used the signal-to-noise ratio (SN) to achieve the appropriate set of operating conditions where variability around target is low in the Taguchi parameter design. Many Statisticians criticize the Taguchi techniques of analysis, particularly those based on the SN. In this paper we propose a substantially simpler optimization procedure for robust design using desirability function without resorting to SN.

• Design & Manufacturing
• /
• v.1 no.1
• /
• pp.17-21
• /
• 2007

In the manufacture and processing of large plastic materials, product quality is tested and verified through several techniques such as injection processing, residual stress through injection molding and shrinkage. With regards to the injection molding process, common problems such as inconsistent density is seen when different points of the product are discovered to have varying thickness levels. Sink marks in product are then evident. This occurs when there is poor molding conditions caused about by poor runner and packaging systems incorporated into the process. We designed the runner system which is possible balanced filling to cavities using CAE program $Moldflow^{TM}$ and then obtained optimal processing conditions by Taguchi's Robust Design technique.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.35-40
• /
• 2003

Immense quantities of coal combustion by-products are produced every year, and only a small fraction of them are currently utilized. The purpose of this study is to investigate reused techniques of coal to highly economic growth and expansion of country base industry. So, in this study, artificial aggregate was developed to recycle coal ash by non-sintering technique and crush method. And characteristic of developed artificial aggregate was examined. Also, noise barriers using developed artificial aggregate was made by link of development of ECO-construction product and is preparing sound absorption and transmission loss experiment. Result of study was showed that artificial aggregate was more proper to use a noise barriers and this is expected to satisfy sound absorption standard in this study. So, if shape and color considering surround and design technology is studied continuously, it can be expected to make ECO-precast product as well as maximize waste recycling.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.2
• /
• pp.33-39
• /
• 2002

Accelerated life testing of a car is used to get information quickly on its life distribution. Test cars are no under severe conditions and fail sooner than under usual conditions. A model is fitted to the accelerated failure times and then extrapolated to estimate the life distribution under usual conditions. This paper presents an accelerated test md the reliability growth theory, and applies it to some subsystems of cars during their prototype and pilot testing. The data presented illustrates explicitly the prediction of the reliability growth in the product development cycle. The application of these techniques is a part of the product assurance function that plays an important role in product reliability improvement.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.625-631
• /
• 2002

A module design aims to develop product architecture that consists physically detachable units such as module. To develop the system of module design, this paper suggests the methodology of part grouping, evaluation of modularization of a product for improving modularization. To determine modules, module concept is proposed to satisfy the objectives of a modular design. Therefore, there are functional, structural, and process modularizations in a modular concept. Module grouping can be accomplished by using an optimization model that maximizes the sum of the weighting. The present study proposes the p-median model and the direct clustering technique. The optimal clustering solution can be obtained by comparing two clustering techniques. To find the best solution among part groups, evaluation of modularization is performed based on the concept of module design. For the evaluation of modularization, evaluation criteria of modularization are used in the matrix table.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.3
• /
• pp.168-176
• /
• 1998

This paper deals with an application on the mould machining of air intake hose product by using 3-dimensional parametric modeling techniques. The detailed domain is the 3-dimensional product with similar shapes and different sizes which needs too much working time for preparation of modeling or machining due to making a trial and errors repeatedly. Decision making rules for selection of modeling order and technique, and for calculation of cutting conditions, and for determination of sequence and method concerning machining operations are required by interview of expert engineers in the field. The developed expert system of modeling and machining is programmed by using a user programming language under the CAD/CAM software of the Personal Designer. The developed system that aids a mould engineer who is working in the modeling and machining section which deal with air intake hose product provides strong and useful capabilities.