• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2007년도 추계학술대회
• /
• pp.299-303
• /
• 2007

This paper deals with conformity assessments requirements for accreditation and certification bodies. This study also introduces conformity guidances of product certification and code of good practice. This paper presents general requirements for accreditation, recognition and registration bodies of environmental quality system and product certification.

• 대한안전경영과학회지
• /
• 제2권3호
• /
• pp.141-150
• /
• 2000

This study aim is analysis device development for design of experiment with calcium chloride relation used a hardener to search cause of product crack, product reliability improvement building data-base program for computer system of mixture rate, product improvement, and new product development.

• 대한인간공학회지
• /
• 제30권1호
• /
• pp.9-17
• /
• 2011

Consumer products are produced on the premise that consumers can use their products safely and effectively no matter how serious human errors they may make. However, different careers and educational experiences of them may induce diverse human errors when they want to use them. In that sense, not a few policies to reduce human errors may show some implications for human error prevention and industrial design of consumer products. In this paper, producers' safety efforts required by Product Liability(PL) Act were reviewed in view of human error prevention, and legal aspects of manufacturers' responsibility for consumer products were discussed in relation to Product Liability Act. Then, principal approaches for them were introduced under the title of System Safety Precedence. After that, major key points for preventing human errors related with consumer products - such as ergonomic design and effective labeling - were discussed with reference to ISO standards. Therefore, it was shown that all the efforts required by PL Act would be correspondent to human error prevention in the whole manufacturing processes if understood by ergonomists. To make a conclusion, it could be said that, for human error prevention, the principle of System Safety Precedence would be indispensable, and that all the efforts for preventing human errors should be systematically organized in Product Safety Management Systems.

• 대한안전경영과학회지
• /
• 제12권3호
• /
• pp.231-235
• /
• 2010

Recently, according to the total quality management environment, the necessity of the systematic administration about the quality information is gradually enlarged as to vehicle related company. Accordingly, related companies require the operation of the information management system matched with the quality administration task level. And through the storage and share of the efficient quality information, they try to solve the customer claim about the quality and prevent the quality problem recurrence of product. This research suggests the standard business process of the auto part supplier for the efficient management of the quality information and the quick correspondence of the quality problem. In addition, by building and managing the quality information management system will be able to expect the more efficient quality management and the product reliability insurance.

• 대한안전경영과학회지
• /
• 제12권3호
• /
• pp.341-348
• /
• 2010

The research which sees for a support the government offices will be able to promote a disability firm manufactured product purchase in order with the petal of the disability firm, investigated the public purchase system use and a satisfaction of the disability firm. The plan which is concrete put the goal presents about disability firm manufactured product purchase promotion of the government offices.

• 산업공학
• /
• 제15권2호
• /
• pp.133-146
• /
• 2002

In July 2002, law of product liability will be established in Korea. Therefore, prevention for product liability(PL) will be immediately needed for many companies. So, in this paper, following topics will be discussed: 1) what are product liability and product safety, 2) why they are needed, 3) why important, 4) what's the difference between considering PL and not considering PL for companies, 5 ) what are risk management methods and risk evaluation system, 6) what is SASA(Systematic Approach to Accident Scenario Analysis) method for applying PL, 7) providing a final conclusion and discussion for future PL law.

• 한국경영정보학회:학술대회논문집
• /
• 한국경영정보학회 2007년도 International Conference
• /
• pp.184-189
• /
• 2007

Concerns about food safety continue to rise and under this situation, governments of some countries have reinforced their regulations more strictly for food safety. In order to prevent food safety incidents or, at least to minimize the impact, the preparedness is very important. As a consequence of this, traceability system has become an essential tool for food safety. Recently, it requires more prevention-based food safety control system. One of the most generally used systems for food safety control is Hazard Analysis and Critical Control Point (HACCP). Both traceability and HACCP systems can be integrated through Electronic Product Code (EPC) Sensor Network technologies which have four value propositions. In this paper, we will introduce the concept of product and process traceability system (P2TS) through the integration of three systems to improve food safety management. The final aim is to find out the added values of the P2TS.

• 대한안전경영과학회지
• /
• 제19권1호
• /
• pp.39-52
• /
• 2017

The scope of this study is the construction conformity assessment system according to the new paradigm of construction management To minimize the differences between domestic and international state, construction Conformity Assessment is subdivided into system certification and product certification. For the former, WASCON(Worldwide Assessment System of Construction Quality Maturity Stage) is applied. For the latter, AQUA(Advanced Quality Assessment System) was developed and adopted to model project for demonstration. Both systems are designed to enable quantified rating, integrated into PQCS(Project Quality Certification), which is an advanced project quality certification system. The construction work observing PQCS will gain quality score on its own quality certificate(Quality mark on construction itself or facilities is also available, if needed or preferred by customers). This Quality Rating System will inspire and encourage any related parties. PQCS score would let supplier/constructor recognize how much themselves are operating effectively and efficiently, offering them the opportunity of redeeming their weaknesses.

• Safety and Health at Work
• /
• 제13권3호
• /
• pp.343-349
• /
• 2022

Background: In the United States, the dairy product manufacturing industry has consistently had higher rates of work-related nonfatal injuries and illnesses compared to the national average for industries in all sectors. The selection and implementation of appropriate safety performance indicators are important aspect of reducing risk within safety management systems. This study examined the leading safety indicators implemented in the dairy product-manufacturing sector (NAICS 3115) and their perceived effectiveness in reducing work-related injuries. Methods: Perceptions were collected from individuals with safety responsibilities in the dairy product manufacturing facilities. OSHA Incident Rate (OIR) and Days away, restricted and transferred (DART) rates from 2013 to 2018 were analyzed. Results: The perceived most effective leading were safety observations, stop work authority, near miss reporting, safety audits, preventative maintenance, safety inspections, safety training attendance, and job hazard analysis/safety analysis, respectively. The 6-year trend analysis showed that those implementing all eight top indicators had a slightly lower rates than those that did not implement all eight. Production focused mentality, poor training, and lack of management commitment were perceived as the leading causes of injuries in this industry. Conclusion: Collecting leading indicators with the unique interest to meet the regulatory requirements and to document the management system without the actual goal of using them as input to improve the system most probably will not lead to an effective reduction of negative safety outcomes. For leading indicators to be effective, they should be properly selected, executed, periodically evaluated and actions are taken when necessary.

• 대한안전경영과학회지
• /
• 제5권2호
• /
• pp.75-85
• /
• 2003

Manufacturing firms have adapted seriously the Design for Manufacture and Assembly (DFMA) techniques which consider concurrently all factors related to the product development by using effective communications and sharing of information on product development processes. This study performed modelling and characterizing the data related to product manufacturing information for Design for Manufacture(DFM) evaluation and analysis. It adapted component-based development method for communicating and managing manufacturing information among distributed manufacturing organizations. Introducing component-based development offers safety and speed to network based system. This development using Unified Modelling Language(UML) provides efficient way for reconstruction and distribution of applications. Also, the integration of database and component into the internet environment enables to communicate and manage effectively manufacturing information for DFM evaluation and analysis at any place in the world. Therefore this system can make it more reasonable that evaluating, analyzing, and effective decision making of product design using DFM technique.