• 대한산업공학회지
• /
• 제34권4호
• /
• pp.398-407
• /
• 2008

We consider a product recovery system that a single product is stocked in order to meet a demand from customers who may return products after usage. This paper addresses a problem of when to release a procurement process to replenish serviceable inventory and how many new products to procure. The structure of the optimal procurement policy is examined and numerically identified as a monotonic threshold curve. A numerical procedure is presented to jointly find the optimal procurement order size, optimal procurement policy, and optimal discounted profit. Sensitivity analysis also indicates that these optimal performance measurements have monotonic properties with respect to system parameters.

• Nuclear Engineering and Technology
• /
• 제38권2호
• /
• pp.163-174
• /
• 2006

The $Ph{\acute{e}}bus$ FP project is an international reactor safety project. Its main objective is to study the release, transport and retention of fission products in a severe accident of a light water reactor (LWR). The FPT4 test was performed with a fuel debris bed geometry, to look at late phase core degradation and the releases of low volatile fission products and actinides. Post Test Analyses results indicate that releases of noble gases (Xe, Kr) and high-volatile fission products (Cs, I) were nearly complete and comparable to those obtained during $Ph{\acute{e}}bus$ tests performed with a fuel bundle geometry (FPT1, FPT2). Volatile fission products such as Mo, Te, Rb, Sb were released significantly as in previous tests. Ba integral release was greater than that observed during FPT1. Release of Ru was comparable to that observed during FPT1 and FPT2. As in other $Ph{\acute{e}}bus$ tests, the Ru distribution suggests Ru volatilization followed by fast redeposition in the fuelled section. The similar release fraction for all lanthanides and fuel elements suggests the released fuel particles deposited onto the plenum surfaces. A blockage by molten material induced a steam by-pass which may explain some of the low releases. The revaporisation testing under different atmospheres (pure steam, $H_2/N_2$ and steam /$H_2$) and up to $1000^{\circ}C$ was performed on samples from the first upper plenum. These showed high releases of Cs for all the atmospheres tested. However, different kinetics of revaporisation were observed depending on the gas composition and temperature. Besides Cs, significant revaporisations of other elements were observed: e.g. Ag under reducing conditions, Cd and Sn in steam-containing atmospheres. Revaporisation of small amounts of fuel was also observed in pure steam atmosphere.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 추계학술대회
• /
• pp.167-172
• /
• 2003

This study reviews the revisions and updates to the Release 3.5 version of the TL 9000 Measurements Handbook. This paper introduces the new organization of QuEST Forum Work Groups(WGs) and how to apply TL 9000 standards in software product lifecycle.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.484-488
• /
• 1997

Fission product release (FPR) assessment for 100% reactor outlet header (ROH) break in CANDU reactor loaded with CANFLEX-NU fuel bundles has been performed. The predicted results are compared with those for the reactor loaded with standard 37-element bundles. The fuel failure thresholds for the CANFLEX and standard bundle elements are very similar. All the sheaths at the corresponding fuel failure thresholds for the CANFLEX and standard bundles fail due to the significant cracks in the surface oxide, except those for the CANFLEX inner element at burnups of 220 to 240 MW.h/kg(U), which fail due to the excessive diametral strain. The fuel failure analysis predicts that the number of failed fuel elements for the CANFLEX bundle case is none, while that for the standard bundle case is 1827. The total (gap plus bound) I-131 releases for the CANFLEX and standard bundles are none and 5889 TBq, respectively The significant reduction of the number of failed fuel elements and FPR for the CABFKEX fuel bundle is attributed to the lower linear power of the CANFLEX fuel bundle compared with the standard fuel bundle.

• Smart Structures and Systems
• /
• 제17권4호
• /
• pp.577-591
• /
• 2016

In this study, the transfer length of 2400 MPa, seven-wire high-strength steel strands with a 15.2 mm diameter in pretensioned prestressed concrete (PSC) beams utilizing high strength concrete over 58 MPa at prestress release was evaluated experimentally. 32 specimens, which have the variables of concrete compressive strength, concrete cover depth, and the number of PS strands, were fabricated and corresponding transfer lengths were measured. The strands were released gradually by slowly reducing the pressure in the hydraulic stressing rams. The measured results of transfer length showed that the transfer length decreased as the concrete compressive strength and concrete cover depth increased. The number of strands had a very small effect, and the effect varied with both the concrete cover depth and concrete strength. The results were compared to current design codes and transfer lengths predicted by other researchers. The comparison results showed that the current transfer length prediction models in design codes may be conservatively used for 2400 MPa high-strength strands in high-strength concrete beams exceeding 58 MPa at prestress release.

• Nuclear Engineering and Technology
• /
• 제47권1호
• /
• pp.1-10
• /
• 2015

After the Fukushima Daiichi nuclear power plant (NPP) accident, new regulatory requirements were enforced in July 2013 and a backfit was required for all existing nuclear power plants. It is required to take measures to prevent severe accidents and mitigate their radiological consequences. The Regulatory Standard and Research Department, Secretariat of Nuclear Regulation Authority (S/NRA/R) has been conducting numerical studies and experimental studies on relevant severe accident phenomena and countermeasures. This article highlights fission product (FP) release and hydrogen risk as two major areas. Relevant activities in the S/NRA/R are briefly introduced, as follows: 1. For FP release: Identifying the source terms and leak mechanisms is a key issue from the viewpoint of understanding the progression of accident phenomena and planning effective countermeasures that take into account vulnerabilities of containment under severe accident conditions. To resolve these issues, the activities focus on wet well venting, pool scrubbing, iodine chemistry (in-vessel and ex-vessel), containment failure mode, and treatment of radioactive liquid effluent. 2. For hydrogen risk: because of three incidents of hydrogen explosion in reactor buildings, a comprehensive reinforcement of the hydrogen risk management has been a high priority topic. Therefore, the activities in evaluation methods focus on hydrogen generation, hydrogen distribution, and hydrogen combustion.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.870-880
• /
• 2016

A steam generator tube rupture (SGTR) event with a stuck-open safety relief valve constitutes one of the most serious accident sequences in pressurized water reactors (PWRs) because it may create an open path for radioactive aerosol release into the environment. The release may be mitigated by the deposition of fission product particles on a steam generator's (SG's) dry tubes and structures or by scrubbing in the secondary coolant. However, the absence of empirical data, the complexity of the geometry, and the controlling processes have, until recently, made any quantification of retention difficult to justify. As a result, past risk assessment studies typically took little or no credit for aerosol retention in SGTR sequences. To provide these missing data, the Paul Scherrer Institute (PSI) initiated the Aerosol Trapping In Steam GeneraTor (ARTIST) Project, which aimed to thoroughly investigate various aspects of aerosol removal in the secondary side of a breached steam generator. Between 2003 and 2011, the PSI has led the ARTIST Project, which involved intense collaboration between nearly 20 international partners. This summary paper presents key findings of experimental and analytical work conducted at the PSI within the ARTIST program.

• 대한화장품학회지
• /
• 제33권4호
• /
• pp.219-225
• /
• 2007

비스에칠헥실옥시페놀메톡시페닐트리아진(Bis-ethylhexyloxyphenolmeth oxyphenyltrizine; BEMT)은 식품의약품안전청 고시 기능성 원료로 자외선 차단 제품에 널리 사용되는 UVA와 UVB의 화학적 자외선 흡수제이다. 그러나 BEMT는 실제 적용에 있어 여러 가지 결점이 있어 사용이 제한되고 있다. 본 연구의 목적은 BEMT가 적용된 고형지질나노입자(BEMT- SLN)의 자외선차단제품 응용에 있다. 제조된 고형지질나노입자의 입도는 약 330 nm, 봉입율은 93.3 %, 결정화지표는 4.3 %였다. In vitro 방출 및 투과 실험 결과에서, BEMT는 SLN보다 O/W 에멀젼이 대체로 높았다. In vivo 실험에서 SLN의 BEMT 방출비는 80 % 감소하였다. 또한 in vitro UV 방어 효과 실험에서 SLN이 적용된 처방의 자외선방어지수(SPF) 값은 약 2.5배 증가하였다. 결국 SLN은 BEMT를 효과적으로 봉입하고 있었으며, 자외선 차단 상승 효과를 나타낸다.

• Journal of Applied Biological Chemistry
• /
• 제64권3호
• /
• pp.225-236
• /
• 2021

The epipyrone (EPN) biosynthetic gene cluster of Epicoccum nigrum is composed of epnC, epnB, and epnA, which encode cytochrome P450 oxidase, glycosyltransferase, and highly reducing polyketide synthase, respectively. Gene inactivation mutants for epnA, epnB, and epnC were previously generated, and it was found that all of them were incapable of producing EPN and any of its related compounds. It was also reported that epnB inactivation abolished epnA transcription, generating ΔepnAB. This study shows that the introduction of native epnC readily restored EPN production in ΔepnC, suggesting that epnC is essential for polyketide release from EpnA and implies that EpnC works during the polyketide chain assembly of EpnA. Introduction of epnC promoter-epnA restored EPN production in ΔepnA. The ΔepnB genotype was prepared by introducing the epnA expression vector into ΔepnAB, and it was found that the resulting recombinant strain did not produce any EPN-related compounds. A canonical epnB inactivation strain was also generated by deleting its 5'-end. At the deletion point, an Aspergllus nidulans gpdA promoter was inserted to ensure the transcription of epnA, which is located downstream of epnB. Examination of the metabolite profile of the resulting ΔepnB mutant via LC-mass spectrometry verified that no EPN-related compound was produced in this strain. This substantiates that C-glycosylation by EpnB is a prerequisite for the release of EpnA-tethered product. In conclusion, it is proposed that cytochrome P450 oxidase and glycosyltransferase work in concert with polyketide synthase to generate EPN without the occurrence of any free intermediates.

• The Korean Journal of Physiology and Pharmacology
• /
• 제2권1호
• /
• pp.31-39
• /
• 1998

As it has been reported that the depolarization induced acetylcholine (ACh) release is modulated by activation of presynaptic $A_1$ adenosine heteroreceptor and various lines of evidence suggest the $A_2$ adenosine receptor is present in the hippocampus. The present study was undertaken to delineate the role of adenosine receptors on the hippocampal ACh release. Slices from the rat hippocampus were equilibrated with $[^3H]choline$ and then the release amount of the labelled product, $[^3H]ACh$, which was evoked by electrical stimulation (rectangular pulses, 3 Hz, 2 ms, 24 mA, $5\;V/cm^{-1}$, 2 min), was measured, and the influence of various adenosine receptor-related agents on the evoked tritium outflow was investigated. And also, the drug-receptor binding assay was performed in order to confirm the presence of $A_1$ and $A_2$ adenosine receptors in the rat hippocampus. N-ethylcarboxamidoadenosine (NECA), a potent adenosine receptor agonist with nearly equal affinity at $A_1$ and $A_2$ adenosine receptors, in concentrations ranging from $1{\sim}30\;{\mu}M$, decreased the electrically-evoked $[^3H]ACh$ release in a concentration-dependent manner without affecting the basal rate of release. And the effect of NECA was significantly inhibited by 8-cyclopentyl-1,3-dipropylxanthine (DPCPX, 2 ${\mu}M$), a selective $A_1$ adenosine receptor antagonist, but was not influenced by 3,7-dimethyl-1-propargylxanthine (DMPX, 5 ${\mu}M$), a specific $A_2$ adenosine receptor antagonist. $N^6-cyclopentyladenosine$ (CPA), a selective $A_1$ adenosine receptor agonist, in doses ranging from 0.1 to 10 ${\mu}M$, reduced evoked $[^3H]ACh$ release in a dose-dependent manner without the change of the basal release. And the effect of CPA was significantly inhibited by 2 ${\mu}M$ DPCPX treatment. 2-P-(2-carboxyethyl)-phenethylamino-5'-N-ethylcarboxamidoadenosine hydrochloride (CGS-21680C), a potent $A_2$ adenosine receptor agonist, in concentrations ranging from 0.1 to 10 ${\mu}M$, did not alter the evoked ACh release. In the drug-receptor binding assay, the binding of $[^3H]2-chloro-N^6-cyclopentyladenosine$ ($[^3H]$CCPA) to the $A_1$ adenosine receptor of rat hippocampal membranes was inhibited by CPA ($K_i$ = 1.22 nM), NECA ($K_i=10.17 nM$) and DPCPX ($K_i=161.86 nM$), but not by CGS-21680C ($K_i=2,380 nM$) and DMPX ($K_i=22,367 nM$). However, the specific binding of $[^3H]CGS-21680C$ to the $A_2$ adenosine receptor was not observed. These results suggest that the $A_1$ adenosine heteroreceptor play an important role in evoked ACh release, but the presence of $A_2$ adenosine receptor is not confirmed in this study.