• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1880-1885
• /
• 1989

In this paper, a new approach for systolic array realizing the discrete cosine transform (DCT) based on discrete Fourier transform (DFT) of an input sequence is presented. The proposed array is based on a simple modified DFT(MDFT) version of the Goertzel algorithm combined with Kung's approach and is proved perfectly. This array requires N cells, one multiplier and takes N clock cycles to produce a complete N-point DCT and also is able to process a continuous stream of data sequences. We have analyzed the output signal-to-noise ratio(SNR) and designed the circuit level layout of one-PE chip. The array coefficients are static adn thus stored-product ROM's can be used in place of multipliers to limit cost as eliminate errors due to coefficients quantization.

• 통합자연과학논문집
• /
• 제6권1호
• /
• pp.39-45
• /
• 2013

Robust design is an approach to reducing performance variation of quality characteristic values in quality engineering. Taguchi has an idea that mean and variation are handled simultaneously to reduce the expected loss in products and processes. In the Taguchi parameter design, the product-array approach using orthogonal arrays is mainly used. However, it often requires an excessive number of experiments. An alternative approach, which is called the combined-array approach, was studied. In these studies, only single quality characteristic (or response) was considered. In this paper we propose how to simultaneously optimize for multiple quality characteristics (or multiresponse) using desirability function when we used the combined-array approach to assign control and noise factors.

• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.138-143
• /
• 2018

In general, the operating temperature of electronic equipment is closely related to product life and reliability, and it is recognized that effectively cooling the parts is an important problem. In this paper, an experimental study on the cooling characteristic according to the pin array of the heat sink is conducted. The experiment on the heat sink was based on the natural convection and temperature distribution changes. The experimental results indicate that the pin array of the heat sink has an effect on the thermoelectric module's cooling characteristic.

• 전기전자학회논문지
• /
• 제18권2호
• /
• pp.228-233
• /
• 2014

In this paper, we propose a CMOS-memristor hybrid circuit that can perform 4-bit multiplication for future energy-efficient computing in nano-scale digital systems. The proposed CMOS-memristor hybrid circuit is based on the parallel architecture with AND and OR planes. This parallel architecture can be very useful in improving the power-delay product of the proposed circuit compared to the conventional CMOS array multiplier. Particularly, from the SPECTRE simulation of the proposed hybrid circuit with 0.13-mm CMOS devices and memristors, this proposed multiplier is estimated to have better power-delay product by 48% compared to the conventional CMOS array multiplier. In addition to this improvement in energy efficiency, this 4-bit multiplier circuit can occupy smaller area than the conventional array multiplier, because each cross-point memristor can be made only as small as $4F^2$.

• 대한전자공학회논문지
• /
• 제26권6호
• /
• pp.131-139
• /
• 1989

본 논문에서는 CMOS 및 domino CMOS 의 특징과 PLA등 array logic의 특징을 동시에 살리면서 동작특성이 좋고 집적도가 높으며 테스트 생성이 쉬운 domino CMOS NOR-NOR array logic의 설계방식을 제안하였다. 이 방식은 pull-down 특성을 개선하여 기생 커패시턴트의 문제점을 해결하며 간단한 부가회로를 사용하여 회로내의 모든 고정들을 검출할 수 있도록 한 testable design 방식이다. PLA의 적항군의 개념 및 특성 행렬을 이용한 테스트 생성 알고리듬과 절차를 제안하였고 이를 PASCAL 언어로 실현하였다. 또한 SPICE 및 P-SPICE를 이용하여 본 설계방식에 대한 검증을 행하였다.

• 전자공학회논문지S
• /
• 제34S권2호
• /
• pp.1-10
• /
• 1997

In this paper, an improved lower bound on the burst-error correcting capability of th ecyclic product code is presented and through the analysis of this new bound clustered cyclic product (CCP abbr.)code is proposed. The CCP code, to improve the burst-error correcting capability, combines the idea of clustering and the transmission method of cyclic product code. That is, a cluster which is defined in this paper as a group of consecutive code symbols is employed as a new transmission unit to the code array transmission of cyclic product code. the burst-error correcting capability of the CCP code is improved without a loss in the random-error correcting capability and performance comparison in the digital video camera records (DVCR) system shows the superiority of the proposed CCP code over conventional product codes.

• ETRI Journal
• /
• 제32권4호
• /
• pp.588-595
• /
• 2010

This paper proposes encoding and decoding for nonlinear product codes and investigates the performance of nonlinear product codes. The proposed nonlinear product codes are constructed as N-dimensional product codes where the constituent codes are nonlinear binary codes derived from the linear codes over higher order alphabets, for example, Preparata or Kerdock codes. The performance and the complexity of the proposed construction are evaluated using the well-known nonlinear Nordstrom-Robinson code, which is presented in the generalized array code format with a low complexity trellis. The proposed construction shows the additional coding gain, reduced error floor, and lower implementation complexity. The (64, 24, 12) nonlinear binary product code has an effective gain of about 2.5 dB and 1 dB gain at a BER of $10^{-6}$ when compared to the (64, 15, 16) linear product code and the (64, 24, 10) linear product code, respectively. The (256, 64, 36) nonlinear binary product code composed of two Nordstrom-Robinson codes has an effective gain of about 0.7 dB at a BER of $10^{-5}$ when compared to the (256, 64, 25) linear product code composed of two (16, 8, 5) quasi-cyclic codes.

• 한국음향학회지
• /
• 제38권5호
• /
• pp.485-493
• /
• 2019

파라메트릭 어레이란 매질의 비선형성을 이용하여 작은 크기의 방사판에서 고지향성 저주파음을 발생시키는 현상을 말한다. 이러한 파라메트릭 어레이의 유용성을 높이기 위해 저주파 음향 빔 조향 연구가 진행 되고 있으며, PD(Product Directivity) 모델을 이용하여 빔 조향 현상이 간편하게 예측되고 있다. 그러나 PD 모델은 준선형 조건에서 가우시안 음원만 적용이 가능하며, 저주파 음향 빔 폭의 예측 정확성이 떨어진다. 본 논문에서는 PD 모델의 한계를 극복할 수 있는 파라메트릭 어레이의 빔 조향 특성 예측 방법에 대해 연구하였다. 이를 위해 파라메트릭 어레이 현상 예측에 널리 사용되는 KZK(Khokhlov-Zabolotskaya-Kuzentsov) 방정식의 수치 해석 알고리즘을 개선하였다. 그리고 전기적 조향 조건을 적용하여 빔 조향 특성을 계산, 실험 결과와 비교 하였다. 그 결과 개선된 알고리즘을 이용하면 준선형 조건에 해당되지 않는 파라메트릭 어레이 음원에서도 저주파 빔 조향 특성 예측이 가능함을 확인하였다.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.1-6
• /
• 2008

Machine operator and quality are affected by chip during cutting process to product machine parts. This paper presents a study of the influence of cutting conditions on the surface roughness obtained by turning using Taguchi method for safety of turning operator. In the machining of titanium alloy, high cutting temperature and strong chemical affinity between the tool and the work material are generated because of its low thermal conductivity and chemical reactivity. Therefore titanium alloys are known as difficult-to materials. An orthogonal array, the signal-to-noise ratio, the analysis of variance are employed to investigate the cutting characteristics of implant material bars using tungsten carbide cutting tools of throwaway type. Also Experimental results by orthogonal array are compared with optimal condition to evaluate advanced reliability. Required simulations and experiments are performed, and the results are investigated.

• 대한의용생체공학회:의공학회지
• /
• 제26권1호
• /
• pp.31-35
• /
• 2005

A novel synthetic aperture method for real-time three-way dynamic focusing is proposed, which provides lateral beam patterns represented as the product of Fourier transforms of transmit subaperture, receive subaperture, and a synthetic window function. In the proposed method, all array elements are fired individually and for each firing echo signals are recorded from all elements of a receive subaperture moving along an array with the transmit element. The three-way dynamic focusing is then achieved by employing a synthetic aperture algorithm for two-way dynamic focusing and a synthetic focusing method for transmit dynamic focusing. Both theoretical analysis and computer simulation results show that the proposed method produces ultrasound beams with improved lateral resolution at all depths compared to the conventional phased array imaging and synthetic aperture focusing methods.