Journal of the Korean Society of Safety (한국안전학회지)

The Korean Society of Safety (한국안전학회)
권호 표지

A Study of Cutting Factor Analysis and Reliability Evaluation of ASTM(F136-96) Material by Taguchi Method

다구치 방법에 의한 ASTM(F136-96)의 절삭인자 분석과 신뢰성 평가

  • Published : 2008.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Machine operator and quality are affected by chip during cutting process to product machine parts. This paper presents a study of the influence of cutting conditions on the surface roughness obtained by turning using Taguchi method for safety of turning operator. In the machining of titanium alloy, high cutting temperature and strong chemical affinity between the tool and the work material are generated because of its low thermal conductivity and chemical reactivity. Therefore titanium alloys are known as difficult-to materials. An orthogonal array, the signal-to-noise ratio, the analysis of variance are employed to investigate the cutting characteristics of implant material bars using tungsten carbide cutting tools of throwaway type. Also Experimental results by orthogonal array are compared with optimal condition to evaluate advanced reliability. Required simulations and experiments are performed, and the results are investigated.

Keywords

References

  1. S. Y. Hong, Irel Markus, W. C. Jeong, "New cooling approach and tool life improvement in crygenic machining of titanium alloy Ti-6Al-4V", International Journal of Machining Tools & Manufacture Vol. 41, No. 15, pp. 2245-2260, 2001 https://doi.org/10.1016/S0890-6955(01)00041-4
  2. 김희남, 박태문, 하상용, 이주상, 김순채, "생산효율을 고려한 상자형모터 회전자의 유효절삭조건에 관한 연구(I)", 한국산업안전학회지, Vol. 10, No. 1, pp. 9-19, 1995
  3. 현동훈, 이용성, "금형 가공의 합리화를 위한 최적 절삭조건 선정 시스템에 관한 연구," 한국산업안전학회지, Vol. 8, No. 4, pp. 73-81, 1993
  4. W. H. Yang and Y. S. Tarng, "Design optimization of cutting parameters for turning operations based on the Taguchi method", Journal of Materials Processing Technology Vol. 84, No. 1,1, pp. 122-129, 1998 https://doi.org/10.1016/S0924-0136(98)00079-X
  5. J. P. Davim, "Study of drilling metal-matrix composites based on the Taguchi Techniques", Journal of Materials Processing Technology, Vol. 132, pp. 250-254, 2003 https://doi.org/10.1016/S0924-0136(02)00935-4
  6. W. H. Yang and Y. S. Tarng, "Design optimization of cutting parameters for turning operations based on the Taguchi method", Journal of Materials Processing Technology, Vol. 84, pp. 122-129, 1998 https://doi.org/10.1016/S0924-0136(98)00079-X
  7. M. S. Hong and Z. M. Lian, "The optimal selection of cutting parameters in turning operations", Transaction of NAMRI/SME, Vol. XXIX, pp. 319-325, 2001
  8. Y. L. Su, S. H. Yao, C. S. Wei and C.T. Wu, "Analyses and design of a WC milling cutter with TiCN coating", Wear, Vol. 215, pp. 59-66, 1998 https://doi.org/10.1016/S0043-1648(97)00280-9
  9. M. J. Maeng, S. M. Jang, "A Study on Analysis of Parameter for Optimal Surface Quality in Face Turning," Journal of the KOSOS, Vol. 21, No. 1, pp. pp. 21-27, 2006
  10. M. S. Song and H. S. Nam, Statistical quality control using statistica, Youngchi, pp. 420-438, 2002