• 전자공학회논문지B
• /
• 제32B권1호
• /
• pp.30-38
• /
• 1995

In this paper, we propose an efficient architecture for motion estimation processor which performs one of essential functions in moving picture coding algorithms. Simple control mechanism of data flow in register array which stores pixel data, parallel processing of pixel data and pipelining scheme in arithmetic umit allow this architecture to process a 352*288 pixel image at the frame rate of 30fs, which is compatable with CCITT standard H.261.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 제6회 파동 및 레이저 학술발표회 Prodeedings of 6th Conference on Waves and Lasers
• /
• pp.29-34
• /
• 1991

An optoelectronic implementation of analog and non-volatile synaptic weights of neural networks is proposed by using the doping modulated amophous silicon multilayer. The persistent photoconductivity(PPC) of the multilayer induced by a short illumination is characterized in experiment and implemented to the non-volatile synaptic weights. An optoelectronic processor with the single layer perceptron algorithm is also proposed. Some learning equations of the processor and the results of simulation are presented.

• 한국통신학회논문지
• /
• 제23권8호
• /
• pp.1977-1983
• /
• 1998

본 논문에서는 인코더 벡터(encoder vector)에 입각하여 양, 음 체크썸 벡터(positive, negative checksum vector)를 정의하고, 이를 벡터 컨버루션(vector convolution)에 적용하여 알고리즘 기반 결함허용 벡터 컨버루션 방식을 제안하였다. 또한 제안된 방식을 배열구조에서 구현하고 복잡도 해석을 통하여 추가 리던던시(redundancy)의 규모를 검토하였다.

• 한국정보통신학회논문지
• /
• 제23권7호
• /
• pp.822-828
• /
• 2019

증강현실은 실제 환경과 함께 가상 정보를 제공하며, 이러한 시스템을 위해 프로세서의 메모리 접근이 요구된다. 하지만 기술 발전에 따라 데이터의 양이 증가함으로써, 프로세서의 작업량 또한 증가하게 된다. 이를 해결하기 위해 임베디드 프로세서의 작업 부하를 감소시킬 수 있는 특정 모듈을 필요로 한다. 본 논문에서는 임베디드 프로세서 대신에 이미지를 출력하는 Direct Memory Acceass(DMA) 컨트롤러를 제안한다. 제안하는 DMA 컨트롤러를 Field Programmable Gate Array(FPGA)에 구현하고 Avalon Memory Mapped(Avalon-MM) 인터페이스를 기반으로 한 DMA 컨트롤러의 기능을 시연한다. 또한, DMA 컨트롤러를 Magnachip/Hynix 0.35um CMOS로 제작하고, 임베디드 시스템의 실현 가능성을 검증한다.

• 센서학회지
• /
• 제32권4호
• /
• pp.246-251
• /
• 2023

Internet of Things (IoT) systems process signals from various sensors using signal processing algorithms suitable for the signal characteristics. To analyze complex signals, these systems usually use signal processing algorithms in the frequency domain, such as fast Fourier transform (FFT), filtering, and short-time Fourier transform (STFT). In this study, we propose a multi-mode sensor signal processor (SSP) accelerator with an FFT-based hardware design. The FFT processor in the proposed SSP is designed with a radix-2 single-path delay feedback (R2SDF) pipeline architecture for high-speed operation. Moreover, based on this FFT processor, the proposed SSP can perform filtering and STFT operation. The proposed SSP is implemented on a field-programmable gate array (FPGA). By sharing the FFT processor for each algorithm, the required hardware resources are significantly reduced. The proposed SSP is implemented and verified on Xilinxh's Zynq Ultrascale+ MPSoC ZCU104 with 53,591 look-up tables (LUTs), 71,451 flip-flops (FFs), and 44 digital signal processors (DSPs). The FFT, filtering, and STFT algorithm implementations on the proposed SSP achieve 185x average acceleration.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.373-376
• /
• 2001

This paper has been studied a real-time video frame data processing control that used the linear systolic array for motion estimation. The proposed data control processing provides to the input data into the multiple processor array unit(MPAU) from search area and reference block data. The proposed data control architecture has based on two slice band for input data processing. And it has no required external control logic blocks for input data as like reference block or search area data.

• 한국인터넷방송통신학회논문지
• /
• 제21권6호
• /
• pp.49-55
• /
• 2021

최근 소형 추적 레이더는 다양한 환경에서 표적을 획득하고, 추적하여 한 번의 타격으로 표적의 시스템을 무능화 시킬 수 있는 높은 거리해상도를 갖는 소형 밀리미터파 추적 레이더 개발을 요구한다. 높은 거리해상도를 갖는 소형 밀리미터파 추적 레이더는 넓은 대역폭의 신호를 실시간으로 처리하고, 소형 추적 레이더의 성능 요구 조건을 충족할 수 있는 신호처리기의 구현이 필요하다. 본 논문에서는 소형 밀리미터파 추적 레이더의 신호처리기 역할과 기능을 수행할 수 있는 신호처리기를 설계하였다. 소형 밀리미터파 추적 레이더를 위한 신호처리기는 8채널에서 입력되는 OOOMHz의 중심주파수와 OOOMHz 대역폭의 신호를 실시간으로 처리하기를 요구한다. 신호처리기의 요구사항을 만족하기 위해 고성능 프로세서 및 ADC (Analog-to-digital converter) 적용과 FPGA (Field Programmable Gate Array)를 활용한 DDC (Digital Down Converter), FFT (Fast Fourier Transform) 등의 전처리 연산을 적용하여 신호처리기를 설계하였다. 마지막으로 소형 밀리미터파 추적 레이더를 위한 신호처리기의 성능시험을 통하여 구현한 신호처리기를 검증하였다.

• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.392-398
• /
• 2009

A novel approach is presented to improve the array performance of the alternate mainbeam nulling in a linearly constrained adaptive array processor in coherent environment. The convergence parameters in the linearly constrained LMS algorithm with a unit gain constraint and a null constraint in the direction of the desired signal are adaptively estimated to reduce the error power between the desired signal and the array output in the 2-dimensional convergence parameter space. It is shown that the case for estimating the convergence parameter for the unit gain constraint with that for null constraint fixed performs best. Also, it is observed that the proposed method performs significantly better than conventional methods as the number of coherent interferences increases.

• 대한임베디드공학회논문지
• /
• 제6권6호
• /
• pp.345-359
• /
• 2011

In high performance embedded systems, the use of multiple on-chip memories is an essential architectural feature for exploiting inherent parallelism in multimedia applications. This feature allows multiple data accesses to be executed in parallel. However, it remains difficult to effectively exploit of multiple on-chip memories. The successful use of this architecture strongly depends on how to efficiently detect and exploit memory parallelism in target applications. In this paper, we propose a technique based on a linear array access descriptor [1], which is generated from profiled data, to detect and exploit memory parallelism. The proposed technique tackles an array reorganization problem to maximize memory parallelism in multimedia applications. We present preliminary experiments applying the proposed technique onto a representative coarse grained reconfigurable array processor (CGRA) with multimedia kernel codes. Our experimental results demonstrate that our technique optimizes data placement by putting independent data on separate storage. The results exhibit 9.8% higher performance on average compared to the existing method.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권12호
• /
• pp.1554-1563
• /
• 1999

This paper presents the design of high speed processor for a sequence logic control using field programmable gate array(FPGA). The sequence logic controller is widely used for automating a variety of industrial plants. The FPGA designed by VHDL consists of program and data memory interface block, input and output block, instruction fetch and decoder block, register and ALU block, program counter block, debug control block respectively. Dedicated clock inputs in the FPGA were used for high speed execution, and also the program memory was separated from the data memory for high speed execution of the sequence instructions at 40 MHz clock. Therefore it was possible that sequence instructions could be operated at the same time during the instruction fetch cycle. In order to reduce the instruction decoding time and the interface time of the data memory interface, an instruction code size was implemented by 16 bits or 32 bits respectively. And the real time debug operation was implemented for easy debugging the designed processor. This FPGA was synthesized by pASIC 2 SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to sequence control system with inputs and outputs of 256 points. The designed processor for the sequence logic was compared with the control system using the DSP(TM320C32-40MHz) and conventional PLC system. The designed processor for the sequence logic showed good performance.