• Korean Journal of Remote Sensing
• /
• v.32 no.2
• /
• pp.119-131
• /
• 2016

Descriptions are provided of the automated aerosol-type classification and mass concentration calculation algorithm for real-time data processing and aerosol products in Korea Aerosol Lidar Observation Network (KALION, http://www.kalion.kr). The KALION algorithm provides aerosol-cloud classification and three aerosol types (clean continental, dust, and polluted continental/urban pollution aerosols). It also generates vertically resolved distributions of aerosol extinction coefficient and mass concentration. An extinction-to-backscatter ratio (lidar ratio) of 63.31 sr and aerosol mass extinction efficiency of $3.36m^2g^{-1}$ ($1.39m^2g^{-1}$ for dust), determined from co-located sky radiometer and $PM_{10}$ mass concentration measurements in Seoul from June 2006 to December 2015, are deployed in the algorithm. To assess the robustness of the algorithm, we investigate the pollution and dust events in Seoul on 28-30 March, 2015. The aerosol-type identification, especially for dust particles, is agreed with the official Asian dust report by Korean Meteorological Administration. The lidar-derived mass concentrations also well match with $PM_{10}$ mass concentrations. Mean bias difference between $PM_{10}$ and lidar-derived mass concentrations estimated from June 2006 to December 2015 in Seoul is about $3{\mu}g\;m^{-3}$. Lidar ratio and aerosol mass extinction efficiency for each aerosol types will be developed and implemented into the KALION algorithm. More products, such as ice and water-droplet cloud discrimination, cloud base height, and boundary layer height will be produced by the KALION algorithm.

• Korean Security Journal
• /
• no.13
• /
• pp.423-449
• /
• 2007

This research is to investigate the detention facilities of police stations and their real operations through the perceptions of detainees at police station cells and to present the policy suggestions for them. To fulfill the research, a questionnaire was made out on the basis of 'the Regulation on Detention and Escort for Suspects'. 'the Regulation on a Standard Plan for Detention Facilities' and 'the Regulation on the Lowest Standard to Treat Detainees' ; and detainees at 23 police station cells under the jurisdiction of Kyungbuk Local Police Agency were asked to answer it. Policy suggestions following from the result of the investigation of detainees' perceptions of the detention facilities of the police stations are as follows; Firstly, the structure of police station cells should be arranged in straight lines in order to take their human rights into consideration and more detention facilities are needed to be built in order to separate male, female, handicapped and juvenile inmates. Secondly, shower rooms and washrooms outside the cells should always be open to detainees whenever they need to be used. Thirdly, any detention facilities deficient in fire fighting equipment should have exit doors installed as soon as possible in case of an emergency and provide sufficient fire extinguishers considering the number of detainees and the size of the facilities. Fourthly, the detention facilities should have sufficient windows for ventilation and take necessary measures to obtain natural lighting instead of electric lighting. Fifthly, air conditioners should be equipped properly taking account of the number of detainees and the dimensions of the facilities. Policy suggestions according to the result of the investigation of detainees' perceptions of the operation of detention facilities of police stations are as follows; Firstly, the problem of operating the detention facilities must deal with worn-out facilities and measures to secure the budget should be taken as soon as possible. Secondly, considering that most detained suspects have difficulties in livelihood, daily necessaries must be issued to them. Thirdly, personal belongings deposited by inmates must be properly managed with the same documentation throughout the police station detention facilities. The number of female guards to take exclusive charge of the physical checkups and processing of female detainees should be increased. Also the facilities for handicapped detainees must be expanded, improved and managed properly. Fourthly, except for handcuffs and ropes to bind detainees in the detention facilities, helmets to prevent self-harm must be withdrawn. The budget to improve the quality of meal issued by the government must be urgently secured and the price of private food sent to detainees must be readjusted to be in line with the consumer price. Health and medical care and sanitation for detainees must be substantial, and also sunbathing and outdoor exercises should be allowed to detainees.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.34-39
• /
• 2018

This research was conducted to estimate moisture content in cucurbitaceae seedlings, such as cucumber and watermelon, using hyperspectral imagery. Using a hyperspectral image acquisition system, the reflectance of leaf area of cucumber and watermelon seedlings was calculated after providing water stress. Then, moisture content in each seedling was measured by using a dry oven. Finally, using reflectance and moisture content, the moisture content estimation models were developed by PLSR analysis. After developing the estimation models, performance of the cucumber showed 0.73 of $R^2$, 1.45% of RMSE, and 1.58% of RE. Performance of the watermelon showed 0.66 of $R^2$, 1.06% of RMSE, and 1.14% of RE. The model performed slightly better after removing one sample from cucumber seedlings as outlier and unnecessary. Hence, the performance of new model for cucumber seedlings showed 0.79 of $R^2$, 1.10% of RMSE, and 1.20% of RE. The model performance combined with all samples showed 0.67 of $R^2$, 1.26% of RMSE, and 1.36% of RE. The model of cucumber showed better performance than the model of watermelon. This is because variables of cucumber are consisted of widely distributed variation, and it affected the performance. Further, accuracy and precision of the cucumber model were increased when an insignificant sample was eliminated from the dataset. Finally, it is considered that both models can be significantly used to estimate moisture content, as gradients of trend line are almost same and intersected. It is considered that the accuracy and precision of the estimating models possibly can be improved, if the models are constructed by using variables with widely distributed variation. The improved models will be utilized as the basis for developing low-priced sensors.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.4
• /
• pp.177-191
• /
• 2013

6th Industry reduced agricultural income and rural areas, the economic downturn is going to be activated is attracting attention as an alternative. 6th industry means that the integrated or linked, the manufacture and processing of secondary industry based on primary industry, the distribution and service of tertiary industry. Park Geun-hye government to realize the creative economy in agriculture as an alternative to specifically evaluate the 6th industries and suggests various policy alternatives. In addition, to support the development of models and analysis of best practices, including sleep studies are in progress. However, the 6th Industry management body for performing management level, technical level, the leader in comprehensive evaluation of competencies and indicators on the development of an evaluation study is insufficient. In this regard, the present study performed 6th industry management body for the management level, technical level, the leader competency evaluation indicators to develop a comprehensive evaluation by utilizing AHP method was developed indicators. The results achieved in Korea As different countries and the FTA as cheap agricultural imports increased 6th industry revenues associated with the management body is very likely to be worse. The endless competition to survive in the most important of the strategy for each individual project management body to operate on their own, rather than to strengthen internal capacity by strengthening linkages with other industries, products, and services that promote the sale will be. This also is that you need to improve revenue management body. Thus, all 6th industry management body at the location of their efforts to gain the trust of consumers will require, moreover, for each management body to build cooperation between the various measures will be sought. In addition to the smart era rapidly changing needs of customers, depending on the life cycle of products and services are getting faster and the new consumer is getting more and more tend to find new products. Thus, customers and management body 6th industry changes quickly and accurately predict market trends, and also to market new products and services that further efforts would be needed.

• Journal of the Korean Society of Costume
• /
• v.2
• /
• pp.73-88
• /
• 1978

This article is an attempt to explain, at least in part, the contemporary Korean women's consciousness of Western Dreasses. As time changes, the role of clothing undergoes varisous transitions, while values and ways of life are constantly in change. It is, therefore, proper and appropriate to recognize as among the major aspects of social psychology such phenomenon as interests, understanding of clothing, the choice of a dress, and attitudes toward clothing, etc. The purpose of this study is to discover problems concerning and their clothing and their solutions, by means of a surveying approach. The method of research used is based upon questionares distributed to parents of first-year pupils in elementary schools and to female clerks working in offices, covering the period from August through October, 1976. The number of the questionares distrubuted totalled 600, and 526 were returned to the research to be utilized for analysis. The contents of the survey included such things as values concerning clothing, kinds of clothing and their practical use, the selection of clothing and the method of purchase, fashions, etc. The classification of aquisition are self-made clothing, clothing made to order and ready-made materials. It is composed of 25 items, including affirmative reasons as well as negative ones. The processing of the material returned was made by using the computer, and based upon classifications such as ages, monthly income, occupations; thus diagraming the result in percentages. The conclusion made and the improvements proposed are as follows: 1. The values of clothing were placed on the expression of the wearer's personality (32.7) and on eauty(28. 6%). The lower age group places is stress upon the expression of personality, while the higher age group stresses beauty. About 50% of wearers are contented with their clothing, their clothing, the rest of whom them indicating their dissatisfaction with what they wear. As to designs at the time of selection, about 46% indicated their preference of personal expression, 31.8% on usefulness. In selecting material, practicality is emphasized; in selecting patterns, single color is preferred. In short, personal expression and esthetic values are primary, with consideration of practicality in mind. 2. The classification of clothing according to their uses indicates the highest numbers in normal wear (home wears) and clothings to be worn outside home. As to evening dresses, (party dress) only one or two articles were checked by many, and no such article was clamed to be possessed by most. The highest ratio of wearing was shown in the case of home wear (47.3%) and clothing to be worn outside the home, which is 55.8%. The budget for one article of clothing was greatest in the case of home wear, and clothing worn outside the home. Many used both kinds of articles for the same purpose. It is desirable, therefore, that the kinds of clothing should be varied according to the purpose for which they are worn, and that clothing appropriate for that purpose should be worn. 3. The motivation for purchasing clothing was highly chosen in the item of seasonal change, which was 55.7%; Clothing deliberately made was indicated by 45.2%. In the mothods of purchasing clothing, clothing made to order and ready-made was indicated by 44.4%, which is the highest; Clothing made to order was 25.4%, and self-sewing was 1.1%, which is the lowest. (1) In the case of self-sewing, "I like it but it is very hard," was checked by 43.6%; "It is so difficult that I cannot wear such clothing" was checked by 13.3%. From these, we can conclude that the questionees are willing to make clothing by themselves, but techniques involved in sewing and at her problems involved in the skill are complicated but when those problems are eliminated there is a possibility for practice. The response checked by questionees concerning the self-sewing was, "It's economical", which is a clear indication that many questionees are positive for self-sewing. It is generally believed that ready-made clothing is cheaper, but it is not necessarily so. In consideration of the quality of clothing, self-sewing is a necessity, and it is desirable that it should be encouraged. (3) Problems involved in ready-made clothing, such as designs, skills, size (fitting) should be eliminated. When these problems are scientifically gotten rid of, it is possible that affirmative returns will be expected. Affirmative responses such as "Ready-made clothing is economical," "You can select there on the spot," are good signs that many women expect to wear ready-made clothing. It is in this sense that the prospect for ready-made clothing is brighter when much development for ready-made clothing is on the way. 4. Much concern for fashion are checked in such item of questions as "Fashionable clothing in the show window," "Clothes worn by women." The first item was checked by 50.1 %, and the second was checked by 48.6%. The reason for following fashion is "Because many people wear them," which was indicated by 30.4%. The reason for not following fashion is "It is too expensive," which was checked by 29.6%. The 26.2% of the answers indicated that "Fashionable clothing is devoid of personality," The influences of fashion over the development of fashion over the development of clothing are two-fold: Esthetic and active. It is not to be deniable that people follow fashion more or less. 1978.9>

• 대한공업교육학회지
• /
• v.38 no.1
• /
• pp.49-67
• /
• 2013

The purpose of this study is to analyze the external systems and the units 'problem solving and invention' of the middle school technology and home economics 1 textbooks of the revised 2011 national curriculum in an effort to provide some information on the content system of invention education in technology class, as invention education was provided as part of a regular subject for the first time. The findings of the study were as follows: First, 'Technology and Inventions' chapter of Technology and Home Economics 1 Textbooks occupied 10-18% share, with the subchapter of 'Problem Solving and Invention' unit taking up 6.7-29% of the textbooks. Second, for most textbooks, 'Technological Problem Solving', 'Idea Generation' 'Multi-dimensional Projection Method', 'Expansive Thought-Processing Methodology', 'Converging Thought Methodology' and 'Invention in Everyday Lives' were included as main contents based on the accomplishment criteria presented in education process interpretation documents. Third, the detailed structures were generally made up as follows: Introduction (Broad Chapter Title, Subchapter Table of Contents, Introduction, Subchapter Title, Study Objectives, Open Thinking); Development (Unit Title, Thinking Ahead, Core Terms, Main Text, Study Helper, Activities, Research Exercises, Supplemental Readings, In-depth Study Topics, Technology in Everyday Lives, Reading Topics, Discussion Topics, and Career Helpers); and Summary (Subchapter Summary, Study Summary, Terms Summary, Writing Follow-up, Self Review, Broad Chapter Evaluation). Fourth, based on the analysis of figures included, photographs had the largest share, followed by figures, tables, and graphs. The photos were used to illustrate various inventions, invention methodologies, and exercise activities, while figures were included to depict the contents included in the main text, and the tables to assist to preparation of process diagrams or materials lists. Fifth, based on the analysis of content weights, greater weights were placed on 'Inventions and Thoughts', and 'Invention Experiment Activities,' while 'Understanding Inventions' and 'Invention and Patents' chapters did not have a lot of texts involved. Sixth, based on the analysis of content presentation methods, most textbooks combined figures, tables, illustrations and texts to discuss the topics. Based on the above study results, we suggest the following: First, a consistent education curriculum should be developed over the topic of invention; and second, more precise and systematic analysis of textbooks would need to be performed.

• Progress in Medical Physics
• /
• v.19 no.4
• /
• pp.269-275
• /
• 2008

Although MR imaging is generally applicable to depict knee joint deterioration it, is sometimes occurred to mis-read and mis-diagnose the common knee joint diseases. In this study, we employed magnetization transfer ratio (MTR) method to improve the diagnosis of the various knee joint diseases. Spin-echo (SE) T2-weighted images (TR/TE 3,400-3,500/90-100 ms) were obtained in seven cases of knee joint deterioration, FSE T2-weighted images (TR/TE 4,500-5,000/100-108 ms) were obtained in seven cases of knee joint deterioration, gradient-echo (GRE) T2-weighted images (TR/TE 9/4.56/$50^{\circ}$ flip angle, NEX 1) were obtained in 3 cases of knee joint deterioration, In six cases of knee joint deterioration, fat suppression was performed using a T2-weighted short T1/tau inverse recovery (STIR) sequence (TR/TE =2,894-3,215 ms/70 ms, NEX 3, ETL 9). Calculation of MTR for individual pixels was performed on registration of unsaturated and saturated images. After processing to make MTR images, the images were displayed in gray color. For improving diagnosis, three-dimensional isotropic volume images, the MR tristimulus color mapping and the MTR map was employed. MTR images showed diagnostic images quality to assess the patients' pathologies. The intensity difference between MTR images and conventional MRI was seen on the color bar. The profile graph on MTR imaging effect showed a quantitative measure of the relative decrease in signal intensity due to the MT pulse. To diagnose the pathologies of the knee joint, the profile graph data was shown on the image as a small cross. The present study indicated that MTR images in the knee joint were feasible. Investigation of physical change on MTR imaging enables to provide us more insight in the physical and technical basis of MTR imaging. MTR images could be useful for rapid assessment of diseases that we examine unambiguous contrast in MT images of knee disorder patients.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.4
• /
• pp.267-275
• /
• 2000

In an effort to assess the reliability of satellite altimeter system, we conducted a comparative analysis of sea level data that were collected using the TOPEX/POSEIDON (T/P) altimeter and the 10 tide gauge (TG) stations in the satellite passing track. The analysis was made using data sets collected from marginal sea regions surrounding the Korean Peninsula at T/P cycles of 2 to 230, which correspond to October 1992 to December 1998. Because of strong tidal activity in the study area, treatment of tidal errors is a very critical step in data processing. Hence in the computation of dynamic heights from the Tn data, we adapted the procedures of Park and Gamberoni (1995) to reduce errors associated with it. When these T/P data were treated, the alias periods of M$_2$, S$_2$, and K$_1$ constitutions were found at 62.1, 58.7, and 173 days. The compatibility of the T/P and TG data sets were examined at various filtering periods. The results indicate that the low-frequency signal of Tn data can be interpreted more safely with longer filtering periods (such as up to the maximum selected values of 200 days). When RMS errors for 200-day low-pass filter period was compared among the whole 10 tidal stations, the values spanned in the range of 2.8 to 6.7 cm. The results of correlation analysis at this filtering period also showed a strong agreement between the Tn and TG data sets over the whole stations investigated (e.g., P values consistently less than 0.0001). According to our analysis, we conclude that the analysis of surface sea level using satellite altimeter data can be made safely and reasonably long filtering periods such as 200 days.

• Journal of the Korean Society of Radiology
• /
• v.3 no.2
• /
• pp.27-31
• /
• 2009

Now a days, the Medical X-ray equipments has become digitalized from analog type such as film, cassette to CR, DR. And many scientists are still researching and developing the Medical X-ray equipment. In this study, we used the Bismuth tri-iodide to conversion material for digital X-ray equipments and we couldn't get the satisfying result than previous study, but it opened new possibility to cover the disadvantage of a-Se is high voltage aplly and difficultness of make. In this paper, we use $BiI_3$ powder(99.99%) as x-ray conversion material and make films that have thickness of 200um and the film size is $3cm{\times}3cm$. Also, we deposited an ITO(Indium Tin Oxide) electrode as top electrode and bottom electrode using a Magnetron Sputtering System. To evaluate a characteristics of the produced films, an electrical and structural properties are performed. Through a SEM analysis, we confirmed a surface and component part. And to analyze the electrical properties, darkcurrent, sensitivity and SNR(Signal to Noise Ratio) are measured. Darkcurrent is $1.6nA/cm^2$ and sensitivity is $0.629nC/cm^2$ and this study shows that the electrical properties of x-ray conversion material that made by screen printing method are similar to PVD method or better than that. This results suggest that $BiI_3$ is suitable for a replacement of a-Se because of the reduced manufacture processing and improved yield.

• Journal of Chest Surgery
• /
• v.42 no.2
• /
• pp.148-156
• /
• 2009

Background: As cardiovascular operations become more complex and sophisticated, there is an increasing need for various bioprostheses for use as components of blood vessels and heart valves. We developed a fatigue stimuli test instrument to objectively evaluate the mechanical durability of a bioprosthesis, and we tested several currently known processing methods for bovine pericardium and we then compared the results. Material and Method: Fresh bovine pericardium was collected at the butcher shop with using aseptic technique, and each piece of pericardium was fixated and/or decellularized by 16 representative methods. We measured the permeability and compliance of the processed bovine pericardium samples, and measured them again after exposure to the fatigue stimuli. All the pieces of pericardium underwent microscopic examinations before and after the fatigue stimuli. Result: A mixture of glutaraldehyde and solvent treatment showed better mechanical durability than did the single glutaraldehyde treatment. High concentration glutaraldehyde treatment showed equal or no worse results than did low concentration glutaraldehyde treatment. After SDS (sodium dodecylsulfate) decellularization, the mechanical property of the bioprosthesis became much worse ($20{\sim}190$ times) and the mechanical durability to the fatigue stimuli was also very poor. Conclusion: We obtained the basic durability data after various fixation methods with using a home-made fatigue test instrument.