• International Journal of Quality Innovation
• /
• v.8 no.1
• /
• pp.137-153
• /
• 2007

Failure mode and effects analysis (FMEA) is a preventive technique in reliability management field. The successful implementation of FMEA technique can avoid or reduce the probability of system failure and achieve good product quality. The FMEA technique had applied in vest scopes which include aerospace, automatic, electronic, mechanic and service industry. The marking process is one of the back ends testing process that is the final process in semiconductor process. The marking process failure can cause bad final product quality and return although is not a primary process. So, how to improve the quality of marking process is one of important production job for semiconductor testing factory. This research firstly implements FMEA technique in laser marking process improvement on semiconductor testing factory and finds out which subsystem has priority failure risk. Secondly, a CCD position solution for priority failure risk subsystem is provided and evaluated. According analysis result, FMEA and CCD position implementation solution for laser marking process improvement can increase yield rate and reduce production cost. Implementation method of this research can provide semiconductor testing factory for reference in laser marking process improvement.

• International Journal of Advanced Culture Technology
• /
• v.3 no.2
• /
• pp.100-109
• /
• 2015

Environmental problems from petroleum-based plastic wastes have been rapidly increasing in recent years. The alternative solution is focus on the development of environmental friendly plastic derived from renewable resource. Poly(lactic acid) (PLA) is a biodegradable polymer synthesized from biomass having potential to replace the petroleum-based non-degradable polymers utilizations. PLA can be synthesized by two methods: (1) ring-opening of lactide intermediate and (2) direct polycondensation of lactic acid processes. The latter process has advantages on high yields and high purity of polymer products, materials handling and ease of process treatments. The polymerization process of PLA synthesis has been widely studied in a laboratory scale. However, the mass scale production using direct polycondensation of lactic acid has not been reported. We have investigated the kinetics and scale-up process of direct polycondensation method to produce PLA in a pilot scale. The order of reaction is 2 and activation energy of lactic acid to lactic acid oligomers is 61.58 kJ/mol. The pre-polymer was further polymerized in a solid state polymerization (SSP) process. The synthesized PLA from both the laboratory and pilot scales show the comparable properties such as melting temperature and molecular weight. The appearance of synthesized PLA is yellow-white solid powder.

• Journal of Technology Innovation
• /
• v.28 no.4
• /
• pp.63-93
• /
• 2020

We suggest a new way of specifying the co-evolution of product and process technologies, and integrating it into one of the well-received technology intelligence tools - a technology radar. Cross impact analysis enables us to identify the core technologies of product-process co-evolution. Combining expert judgment with its results, we can clarify the technological co-evolution trajectory with mainstream as well as emerging core technologies. Reflecting these in the assessment process of a technology radar, we could improve reliance of the technology assessment process and technology portfolio. From the academic perspective, our research provides a point where the co-evolution theory encouners technology intelligence methods. Practically, strategic capability of future-preparedness and strategic management could improve by adopting our method based on our example of co-evolution of semiconductor product and process technologies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.6
• /
• pp.690-696
• /
• 2019

New companies expecting market penetration by adopting technology commercialization process could face high uncertainty and constraints. In particular, ICT-based firms that enter competitive markets must deal with more complex situations. Although in-depth research has been done to solve the problem, there is still a lack of understanding of how startups' technology commercialization process is successful. To discuss the issue, this paper presents the technology commercialization model and determinants.(policy, finance, work team, organizational culture, overcoming the difficulties etc.) the suitability of the framework. From this analysis it emerged that the sustainability of organizational capabilities is as important as the adherence to the technology commercialization process for companies. As the organizational capacity has decreased, the driving force for technology commercialization has weakened. Therefore, the technology commercialization process does not guarantee the success of the market entry but is understood as a means of market access. If the organizational capacity is not strengthened, there is no successful technology commercialization process.

• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2336-2347
• /
• 2018

The azeotrope of methyl acetate methanol and water was isolated using extractive distillation with water as entrainer. The pressure-swing extractive distillation (PSED) process and vapor side-stream distillation column (VSDC) with the rectifier process were designed to separate the methyl acetate, methanol and water mixture. It was revealed that the VSDC with the rectifier process had a reduction in energy consumption than the PSED process. Four control schemes of the two process were investigated: Double temperature control scheme (CS1), $Q_R/F$ feedforward control of reboiler duty scheme for PESD (CS2), $Q_R/F$ feedback control scheme for VSDC (CS3), the feedback control scheme of sensitive plate temperature of side-drawing distillation column to dominate the compressor shaft speed (CS4). Feed flow and composition disturbance were used to evaluate the dynamic performance. As a result, CS4 is a preferable choice for separation of methyl acetate-methanol-water mixture. A control scheme combining the operating parameters of dynamic equipment with the control indicators of static equipment was proposed in this paper. It means using the sensitive plate temperature of side-drawing column to control the compressor shaft speed. This is a new control scheme for extractive distillation.

• The Korean Journal of Ceramics
• /
• v.3 no.3
• /
• pp.182-186
• /
• 1997

Diamond-like carbon(DLC) films were deposited on silicon substreates by using an RF plasmaassisted CVD apparatus; the effects of deposition conditions such as CH4 gas pressure and substrate bias voltage on DLC film friction and wear were examined in both friction and scratch tests. In friction tests critical loads at which the friction coefficient increases abruptly depend on substrate bias voltages: critical loads deposited at a bias voltage of -100 V exceed those deposited at other bias voltages. Critical loads are correlated with DLC film hydrogen content. Critical DLC film loads in scratch tests depended considerably less than in friction tests. The friction coefficient of DLC films depends on neither substrate bias voltage nor CH4 gas pressure.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.1
• /
• pp.237-264
• /
• 2009

Many Korean companies wanted to improve technological competitiveness and business performance radically through technology leadership initiatives. In-depth case studies about successful Korean technological innovation in the technology generation stage have potential to minimize Korea and developing country firms' trial and error when they are pursuing new technological innovation in the technology generation stage. There are few studies about developing country firms' technological innovations in the technology generation stage and especially process innovation studies are far less performed compared to product innovation studies. This is an exploratory study of POSCO's FINEX process technology innovation in the technology generation stage. These are my findings from this study. Firstly, leadership innovation in the technology generation stage is not a continuous development of catch-up innovation in the technology internalization stage and only top managements can initiate highly risky leadership innovation. Secondly, developing country firms which lacked in technological capability overcomes difficulties in the early stage through complementary technological collaboration with R&D first-movers. Thirdly, this company become a technology leader in spite of late entry in technology development race with developed country firms through rapid scale-ups.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.375-378
• /
• 2001

At the time of facing strict environmental regulations, environmentally friendly dyeing technology is being highlighted due to the potential possibility of reducing environmental impact, so is the preparation process that uses a great deal of water and generates as much contamination. Enzyme technology has been regarded as an eco-friendly solution to industrial problems, saving water, chemicals and energy. (omitted)

• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.84-93
• /
• 2015

This study is for the development of Cover Glass Grinding Processing System. This system is developed for manufacturing a mass product system grinding cover glasses with highly precise mechanism, and we improved resulted quality. In the development process, we developed a complete process technology through mechanical design, image processing technology, spindle control, mark identification algorithm etc. With this cover glass grinding development, we could developed process technology, image processing technology, organization mechanisms and control algorithms.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04c
• /
• pp.112-114
• /
• 2003

In order to survive in today's competitive world, understanding the business process and how it works can be a key to success. Visualization improves understandability of business process for developers, and accompanies modeling. There are two modeling methods that are often used in the industry - standard BPMN (Business Process Modeling Notation) and UML activity diagram. This paper shows whether the activity graph of UML 2.0 draft can support business process modeling or not through comparing it with the BPMN features.