• Title/Summary/Keyword: Process pressure

Search Result 6,551, Processing Time 0.039 seconds

Low Temperature Growth of MCN(M=Ti, Hf) Coating Layers by Plasma Enhanced MOCVD and Study on Their Characteristics (플라즈마 보조 유기금속 화학기상 증착법에 의한 MCN(M=Ti, Hf) 코팅막의 저온성장과 그들의 특성연구)

  • Boo, Jin-Hyo;Heo, Cheol-Ho;Cho, Yong-Ki;Yoon, Joo-Sun;Han, Jeon-G.
    • Journal of the Korean Vacuum Society
    • /
    • v.15 no.6
    • /
    • pp.563-575
    • /
    • 2006
  • Ti(C,N) films are synthesized by pulsed DC plasma enhanced chemical vapor deposition (PEMOCVD) using metal-organic compounds of tetrakis diethylamide titanium at $200-300^{\circ}C$. To compare plasma parameter, in this study, $H_2$ and $He/H_2$ gases are used as carrier gas. The effect of $N_2\;and\;NH_3$ gases as reactive gas is also evaluated in reduction of C content of the films. Radical formation and ionization behaviors in plasma are analyzed in-situ by optical emission spectroscopy (OES) at various pulsed bias voltages and gas species. He and $H_2$ mixture is very effective in enhancing ionization of radicals, especially for the $N_2$. Ammonia $(NH_3)$ gas also highly reduces the formation of CN radical, thereby decreasing C content of Ti(C, N) films in a great deal. The microhardness of film is obtained to be $1,250\;Hk_{0.01}\;to\;1,760\;Hk_{0.01}$ depending on gas species and bias voltage. Higher hardness can be obtained under the conditions of $H_2\;and\;N_2$ gases as well as bias voltage of 600 V. Hf(C, N) films were also obtained by pulsed DC PEMOCYB from tetrakis diethyl-amide hafnium and $N_2/He-H_2$ mixture. The depositions were carried out at temperature of below $300^{\circ}C$, total chamber pressure of 1 Torr and varying the deposition parameters. Influences of the nitrogen contents in the plasma decreased the growth rate and attributed to amorphous components, to the high carbon content of the film. In XRD analysis the domain lattice plain was (111) direction and the maximum microhardness was observed to be $2,460\;Hk_{0.025}$ for a Hf(C,N) film grown under -600 V and 0.1 flow rate of nitrogen. The optical emission spectra measured during PEMOCVD processes of Hf(C, N) film growth were also discussed. $N_2,\;N_2^+$, H, He, CH, CN radicals and metal species(Hf) were detected and CH, CN radicals that make an important role of total PEMOCVD process increased carbon content.

Effect of Extraction Process on the Physicochemical Characteristics of Seed Oil of Camellia sinensis (추출 공정에 따른 Camellia sinensis 오일의 물리화학적 특성에 관한 연구)

  • Kim, Youn-Soon;Kim, Ran;Na, Myung-Soon;Choi, DuBok
    • Applied Chemistry for Engineering
    • /
    • v.21 no.2
    • /
    • pp.148-153
    • /
    • 2010
  • This study was carried out to investigate the effect of extraction methods on the physicochemical characteristics using seed oil of wild green tea (Camellia sinensis). When the solvent extraction method after grinding and steam treatment (SGS) was used for oil extraction, the yield was highest. The specific gravity was a range of $0.91{\sim}0.94g/cm^{3}$ irrespective of extraction methods of oil. However, the light in the solvent extraction method after grinding (SG), the red in the pressure extraction method after grinding and roasting treatment (PGR), and the yellow in SG method were highest. Among various fatty acids, the concentrations of C16 : 0, C18 : 1 and C18 : 2 were highest, irrespective of extraction methods. Especially, the C16 : 0 concentration was in the order of SG (34.78%), SGS (23.04%), and PRGS method (23.01%), the C18 : 1 concentration was in the order of PGR (43.35%), SGS (42.7%), SG method (39.0%), and in the case of C18 : 2, it was in order of PGR (23.15%), SGS (23.03%), and SG method (15.01%). The saturated fatty acid concentration was in the order of SG (40.59%), PGR (31.61%), and SGS method (30.1%). On the other hand, in the case of the unsaturated fatty acid, it was in the order of SGS (69.9%), PGR (68.39%), and SG method (59.41%). The acid values in the SGS and SG method after 10 days of storage were in the range of 6~8 mgKOH/g. However, in the case of PGR method, it was increased with the increase of storage time and was 49.3 mgKOH/g after 60 days. The peroxide values in the SGS and SG method were in the range of 60~100 mEq/g from 10 to 60 days of storage. On the other hand, when the storage time was increased from 10 to 30 days, it was sharply increased from 60 to 240 mEq/g. The rancidity was in the order of $Fe^{2+}$, $Cu^{2+}$, $Cr^{2+}$, $Zn^{2+}$ and $Ni^{2+}$, irrespective of extraction methods. Especially, when butylated hydroxyanisole (BHA) was added into oil containing 1.0 ppm of <$Fe^{2+}$, the peroxide value was decreased from 539.4 to 216.6%. These results show that seed oil of Camellia sinensis grown in Iksan can be applied as sources for cosmetics, detergents, food, and pharmaceuticals.

Design of a pilot-scale helium heating system to support the SI cycle (파이롯 규모 SI 공정 시험 설비에서의 헬륨 가열 장치 설계)

  • Jang, Se-Hyun;Choi, Yong-Suk;Lee, Ki-Young;Shin, Young-Joon;Lee, Tae-Hoon;Kim, Jong-Ho;Yoon, Seok-Hun;Choi, Jae-Hyuk
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.40 no.3
    • /
    • pp.157-164
    • /
    • 2016
  • In this study, researchers performed preliminary design and numerical analysis for a pilot-scale helium heating system intended to support full-scale construction for a sulfur-iodine (SI) cycle. The helium heat exchanger used a liquefied petroleum gas (LPG) combustor. Exhaust gas velocity at the heat exchanger outlet was approximately 40 m/s based on computational thermal and flow analysis. The maximum gas temperature was reached with six baffles in the design; lower gas temperatures were observed with four baffles. The amount of heat transfer was also higher with six baffles. Installation of additional baffles may reduce fuel costs because of the reduced LPG exhausted to the heat exchanger. However, additional baffles may also increase the pressure difference between the exchanger's inlet and outlet. Therefore, it is important to find the optimum number of baffles. Structural analysis, followed by thermal and flow analysis, indicated a 3.86 mm thermal expansion at the middle of the shell and tube type heat exchanger when both ends were supported. Structural analysis conditions included a helium flow rate of 3.729 mol/s and a helium outlet temperature of $910^{\circ}C$. An exhaust gas temperature of $1300^{\circ}C$ and an exhaust gas rate of 52 g/s were confirmed to achieve the helium outlet temperature of $910^{\circ}C$ with an exchanger inlet temperature of $135^{\circ}C$ in an LPG-fueled helium heating system.

Test Bed Studies with Highly Efficient Amine CO2 Solvent (KoSol-4) (고효율 습식 아민 CO2 흡수제(KoSol-4)를 적용한 Test bed 성능시험)

  • Lee, Ji Hyun;Kwak, No-Sang;Lee, In Young;Jang, Kyung Ryoung;Jang, Se Gyu;Lee, Kyung Ja;Han, Gwang Su;Oh, Dong-Hun;Shim, Jae-Goo
    • Korean Chemical Engineering Research
    • /
    • v.51 no.2
    • /
    • pp.267-271
    • /
    • 2013
  • Test bed studies with highly efficient amine $CO_2$ solvent (KoSol-4) developed by KEPCO research institute were performed. For the first time in Korea, evaluation of post-combustion $CO_2$ capture technology to capture 2 ton $CO_2$/day from a slipstream of the flue gas from a coal-fired power station was performed. Also the analysis of solvent regeneration energy was conducted to suggest the reliable performance data of the KoSol-4 solvent. For this purpose, we have tested 5 campaigns changing the operating conditions of the solvent flow rate and the stripper pressure. The overall results of these campaigns showed that the $CO_2$ removal rate met the technical guideline ($CO_2$ removal rate: 90%) suggested by IEA-GHG and that the regeneration energy of the KoSol-4 showed about 3.0~3.2 GJ/$tCO_2$ which was, compared to that of the commercial solvent MEA (Monoethanolamine), about 25% reduction of regeneration energy. Based on these results, we could confirm the good performance of the KoSol-4 solvent and the $CO_2$ capture process developed by KEPCO research institute. And also it was expected that the cost of $CO_2$ avoided could be reduced drastically if the KoSol-4 is applied to the commercial scale $CO_2$ capture plant.

A Study on the Risk Factors for Maternal and Child Health Care Program with Emphasis on Developing the Risk Score System (모자건강관리를 위한 위험요인별 감별평점분류기준 개발에 관한 연구)

  • 이광옥
    • Journal of Korean Academy of Nursing
    • /
    • v.13 no.1
    • /
    • pp.7-21
    • /
    • 1983
  • For the flexible and rational distribution of limited existing health resources based on measurements of individual risk, the socalled Risk Approach is being proposed by the World Health Organization as a managerial tool in maternal and child health care program. This approach, in principle, puts us under the necessity of developing a technique by which we will be able to measure the degree of risk or to discriminate the future outcomes of pregnancy on the basis of prior information obtainable at prenatal care delivery settings. Numerous recent studies have focussed on the identification of relevant risk factors as the Prior infer mation and on defining the adverse outcomes of pregnancy to be dicriminated, and also have tried on how to develope scoring system of risk factors for the quantitative assessment of the factors as the determinant of pregnancy outcomes. Once the scoring system is established the technique of classifying the patients into with normal and with adverse outcomes will be easily de veloped. The scoring system should be developed to meet the following four basic requirements. 1) Easy to construct 2) Easy to use 3) To be theoretically sound 4) To be valid In searching for a feasible methodology which will meet these requirements, the author has attempted to apply the“Likelihood Method”, one of the well known principles in statistical analysis, to develop such scoring system according to the process as follows. Step 1. Classify the patients into four groups: Group $A_1$: With adverse outcomes on fetal (neonatal) side only. Group $A_2$: With adverse outcomes on maternal side only. Group $A_3$: With adverse outcome on both maternal and fetal (neonatal) sides. Group B: With normal outcomes. Step 2. Construct the marginal tabulation on the distribution of risk factors for each group. Step 3. For the calculation of risk score, take logarithmic transformation of relative proport-ions of the distribution and round them off to integers. Step 4. Test the validity of the score chart. h total of 2, 282 maternity records registered during the period of January 1, 1982-December 31, 1982 at Ewha Womans University Hospital were used for this study and the“Questionnaire for Maternity Record for Prenatal and Intrapartum High Risk Screening”developed by the Korean Institute for Population and Health was used to rearrange the information on the records into an easy analytic form. The findings of the study are summarized as follows. 1) The risk score chart constructed on the basis of“Likelihood Method”ispresented in Table 4 in the main text. 2) From the analysis of the risk score chart it was observed that a total of 24 risk factors could be identified as having significant predicting power for the discrimination of pregnancy outcomes into four groups as defined above. They are: (1) age (2) marital status (3) age at first pregnancy (4) medical insurance (5) number of pregnancies (6) history of Cesarean sections (7). number of living child (8) history of premature infants (9) history of over weighted new born (10) history of congenital anomalies (11) history of multiple pregnancies (12) history of abnormal presentation (13) history of obstetric abnormalities (14) past illness (15) hemoglobin level (16) blood pressure (17) heart status (18) general appearance (19) edema status (20) result of abdominal examination (21) cervix status (22) pelvis status (23) chief complaints (24) Reasons for examination 3) The validity of the score chart turned out to be as follows: a) Sensitivity: Group $A_1$: 0.75 Group $A_2$: 0.78 Group $A_3$: 0.92 All combined : 0.85 b) Specificity : 0.68 4) The diagnosabilities of the“score chart”for a set of hypothetical prevalence of adverse outcomes were calculated as follows (the sensitivity“for all combined”was used). Hypothetidal Prevalence : 5% 10% 20% 30% 40% 50% 60% Diagnosability : 12% 23% 40% 53% 64% 75% 80%.

  • PDF

Investigating the Partial Substitution of Chicken Feather for Wood Fiber in the Production of Wood-based Fiberboard (목질 섬유판 제조에 있어 도계부산물인 닭털의 목섬유 부분적 대체화 탐색)

  • Yang, In;Park, Dae-Hak;Choi, Won-Sil;Oh, Sei Chang;Ahn, Dong-uk;Han, Gyu-Seong;Oh, Seung Won
    • Korean Chemical Engineering Research
    • /
    • v.56 no.4
    • /
    • pp.577-584
    • /
    • 2018
  • This study was conducted to investigate the potential of chicken feather (CF), which is a by-product in poultry industry, as a partial substitute of wood fiber in the production of wood-based fiberboard. Keratin-type protein constituted the majority of CF, and its appearance did not differ from that of wood fiber. When the formaldehyde (HCHO) adsorptivities of CF compared by its pretreatment type, feather meal (FM), which was pretreated CF with high temperature and pressure and then grounded, showed the highest HCHO adsorptivity. In addition, there was no difference between the adsorbed HCHO amounts, which was measured by dinitrophenylhydrazine method, of scissors-chopped CF and CF beated with an electrical blender. Mechanical properties and HCHO emission of medium-density fiberboards (MDF), which were fabricated with wood fiber and 5 wt% CF, beated CF or FM based on the oven-dried weight of wood fiber, were not influenced by the pretreatment type of CF. However, when the values compared with those of MDF made with just wood fiber, thickness swelling and HCHO emission of the MDF were improved greatly with the addition of CF, beated CF or FM. Based on the results, it might be possible to produce MDF with improved dimensional stability and low HCHO emission if CF, beated CF or FM is added partially as a substitute of wood fiber in the manufacturing process of MDF produced with the conventional urea-formaldehyde resin of $E_1$ grade. However, the use of CF or FM in the production of MDF has a low economic feasibility at the current situation due to the securing difficulty and high cost of CF. In order to enhance the economic feasibility, it requires to use CF produced at small to medium-sized chicken meat plants. More importantly, it is considered that the technology developed from this research has a great potential to make provision for the prohibition of animal-based feed and to dispose environmentally avian influenza-infected poultry.

Analysis of Pre-service Science Teachers' Responsive Teaching Types and Barriers of Practice (예비과학교사들의 반응적 교수 유형 및 실행의 제약점 분석)

  • Cho, Mihyun;Paik, Seoung-Hey
    • Journal of The Korean Association For Science Education
    • /
    • v.40 no.2
    • /
    • pp.177-189
    • /
    • 2020
  • In this study, we implemented an education program to improve the responsive teaching ability of pre-service science teachers, and analyzed the responsive teaching practices revealed during the program process. Through this, we derived the types and characteristics of responsive teaching practice, identified factors that made it difficult for pre-service teachers to practice, and obtained empirical data on under what conditions the responsive teaching capacity of pre-service teachers was developed. For this purpose, a practice-based teacher education program was designed and carried out for 14 pre-service teachers who had no experience in responsive teaching. The program consists of four steps; observation of class, practice through rehearsal, application in practicum, and post-reflection on educational practice. In particular, qualitative analysis was conducted on the types of responsive teaching and their detrimental factors revealed during application in practicum. As a result of the analysis, four types were derived; discriminator type, communicator type, guide type, and facilitator type. Each type was identified as having a common responsive teaching step element. The education program implemented in this study was effective for pre-service teachers to recognize the importance of student-participation class and the educational effect of responsive teaching. However, three barriers that prevented pre-service teachers from responsive teaching practice were also analyzed. First was the pressure to achieve specific learning goals within a given class time. Second was the rigid belief of the fixed curriculum. Third was the obsession that the teacher should lead the class. Based on these results, it was suggested that in order to improve the responsive teaching ability of pre-service teachers, it is necessary to support the recognition of breaking out of the thinking the time constraint, the flexibility of the curriculum, and the role of teacher as a class supporter.

Geophysical Study on the Ultramafic Rocks of Chungnam Province, Korea: Characteristics of Seismic Velocity (충남지역 초염기성 암체의 지구물리학적 연구: 탄성파 속도 특성)

  • Suh, Man-Cheol;Woo, Young-Kyun;Song, Suck-Hwan;Tianyao, Hao
    • Journal of the Korean earth science society
    • /
    • v.21 no.3
    • /
    • pp.349-358
    • /
    • 2000
  • Compressional and shear wave velocities (Vp and Vs) and densities have been measured for serpentinite, amphibolite, amphibole and biotite schist, and gneiss from western part of Chungnam Province at room temperature. Ranges of the density are 2.6${\sim}$2.86g/cm$^3$ for serpentinite, 2.25${\sim}$2.81g/cm$^3$ for talc, and 2.74${\sim}$3.07g/cm$^3$ for metamorphic rocks. Of these rocks, talc shows wider ranges than serpentinite and amphibolites due to its metamorphic process from serpentinite. Values of Vp and Vs are 5719${\sim}$6062m/s and 2898${\sim}$3351m/s for serpentinites, 4019${\sim}$5478m/s and 2241/${\sim}$2976m/s for talc, 5375${\sim}$6372m/s and 3042${\sim}$3625m/s for amphibolite, 5290${\sim}$5499m/s and 2968${\sim}$3137m/s for schist, and 4788m/s and 2804m/s for gneiss, respectively. Velocity of P wave increases 1.47 times faster than S wave with increase of density. The results of seismic velocity measurement show anisotropy, higher velocity across than along the schistocity of rocks, especially in metamorphic rocks. This fact indicates that there were regional metamorphism related with tectonic forces. Values of seismic velocity increase with increasing pressure from 20 MPa to 70 MPa, especially in metamorphic rocks. Overall recalculated Vp and Vs values suggest that the serpentinite indicates for upper mantle in the respects of seismic characteristics, in spite of high degree of serpentinization. In addition, those of the amphibolite do for low crust, and gneiss and schist for upper crust.

  • PDF

Discussion on the Strategic Priorities and Navy's Coping in the Interwar Period Britain, 1919?1939 (「전간기 영국의 전략 우선순위 논의와 영국해군의 대응, 1919-1939」)

  • Jeon, Yoon-Jae
    • Strategy21
    • /
    • s.32
    • /
    • pp.123-159
    • /
    • 2013
  • The purpose of this research paper is to re-valuate the factors that affected the Royal Navy's rearmament and preparation for war by conducting analysis on the discussion held in the Britain on the strategic priorities and Navy's coping measures adopted during the interwar period. After the end of the WWI, each of the military arms of the Britain faced significant difficulty in securing budget and increasing their military power all throughout the interwar period, and the Navy was not an exception. The WWII that got started on September 1939 was the turning point in which this difficulty led to full-fledged crisis. Immensely many criticisms followed after the war and problems were identified when it comes to the Royal Navy's performance during the war. This type of effort to identify problem led to the attempt to analyze whether Royal Navy's preparation for war and rearmament policy during interwar period were adequate, and to identify the root causes of failure. Existing studies sought to find the root cause of failed rearmament from external factors such as the deterioration of the Britain itself or pressure from the Treasury Department to cut the budget for national defense, or sought to detect problems from the development of wrong strategies by the Navy. However, Royal Navy's failed preparation for the war during interwar period is not the result of one or two separate factors. Instead, it resulted due to the diverse factors and situations that the Britain was facing at the time, and due to intricate and complex interaction of these factors. Meanwhile, this research paper focused on the context characterized by 'strategic selection and setting up of priorities' among the various factors to conduct analysis on the Navy's rearmament by linking it with the discussion held at the time on setting up strategic priorities, and sought to demonstrate that the Navy Department's inadequate counter-measures developed during this process waned Royal Navy's position. After the end of WWI, each of the military arms continued to compete for the limited resources and budget all throughout the interwar period, and this type of competition amidst the situation in which the economic situation of Britain was still unstable, made prioritization when it comes to the allocation of resources and setting up of the priorities when it comes to the military power build-up, inevitable. Amidst this situation, the RAF was able to secure resources first and foremost, encouraged by the conviction of some politicians who were affected by the 'theory of aerial threat' and who believed that curtailing potential attack with the Air Force would be means to secure national security at comparatively lower cost. In response, Navy successfully defended the need for the existence of Navy despite the advancement of the aerial power, by emphasizing that the Britain's livelihood depends on trade and on the maintenance of maritime traffic. Despite this counter-measuring logic, however, Navy's role was still limited to the defense of overseas territory and to the fleet run-off instead of sea traffic route production when it comes to the specific power build-up plan, and did not understand the situation in which financial and economic factors gained greater importance when it comes to the setting up of strategic priorities. As a result, Navy's plan to build its powers was met with continual resistance of the Treasury Department, and lost the opportunity to re-gain the status of 'senior service' that it had enjoyed in the past during the competition for strategic prioritization. Given that the strategic and economic situation that Korea faces today is not very different from that of the Britain during the interwar period, our Navy too should leverage the lessons learned from the Royal Navy to make the effort to secure viable position when it comes to the setting of priorities in case of national defense strategy by presenting the basis on why maritime coping should be prioritized among the numerous other threats, and by developing the measures for securing the powers needed effectively amidst the limited resources.

  • PDF

Hydro-Mechanical Modelling of Fault Slip Induced by Water Injection: DECOVALEX-2019 TASK B (Step 1) (유체 주입에 의한 단층의 수리역학적 거동 해석: 국제공동연구 DECOVALEX-2019 Task B 연구 현황(Step 1))

  • Park, Jung-Wook;Park, Eui-Seob;Kim, Taehyun;Lee, Changsoo;Lee, Jaewon
    • Tunnel and Underground Space
    • /
    • v.28 no.5
    • /
    • pp.400-425
    • /
    • 2018
  • This study presents the research results and current status of the DECOVALEX-2019 project Task B. Task B named 'Fault slip modelling' is aiming at developing a numerical method to simulate the coupled hydro-mechanical behavior of fault, including slip or reactivation, induced by water injection. The first research step of Task B is a benchmark simulation which is designed for the modelling teams to familiarize themselves with the problem and to set up their own codes to reproduce the hydro-mechanical coupling between the fault hydraulic transmissivity and the mechanically-induced displacement. We reproduced the coupled hydro-mechanical process of fault slip using TOUGH-FLAC simulator. The fluid flow along a fault was modelled with solid elements and governed by Darcy's law with the cubic law in TOUGH2, whereas the mechanical behavior of a single fault was represented by creating interface elements between two separating rock blocks in FLAC3D. A methodology to formulate the hydro-mechanical coupling relations of two different hydraulic aperture models and link the solid element of TOUGH2 and the interface element of FLAC3D was suggested. In addition, we developed a coupling module to update the changes in geometric features (mesh) and hydrological properties of fault caused by water injection at every calculation step for TOUGH-FLAC simulator. Then, the transient responses of the fault, including elastic deformation, reactivation, progressive evolutions of pathway, pressure distribution and water injection rate, to stepwise pressurization were examined during the simulations. The results of the simulations suggest that the developed model can provide a reasonable prediction of the hydro-mechanical behavior related to fault reactivation. The numerical model will be enhanced by continuing collaboration and interaction with other research teams of DECOLVAEX-2019 Task B and validated using the field data from fault activation experiments in a further study.