• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1493-1495
• /
• 1997

Cropping of head and tail ends of rod in wire Rolling Process is required to aviod roll damage, and prevent cobbles. In order to reduce the crop loss, the new crop control system for rotary shear of Wire rolling Process has been developed. Performance shows the developed system cut precisely within setting length. As a result, it is expected to increase the yield ratio of products about 0.2 percent and stabilize the operantional condition.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.437-440
• /
• 1998

In this paper, the design method of fuzzy neural network(FNN) controller using indirect adaptive control technique is presented for controlling chaotic nonlinear systems. Firstly, the fuzzy model identified with a FNN in off-line process. Secondly, the trained fuzzy model tunes adaptively the control rules of the FNN controller in on-line process. In order to evaluate the proposed control method, Indirect adaptive control method is applied to the representative continuous-time chaotic nonlinear systems, that is, the Duffing system and the Lorenz system. Simulations are done to verify the effectivencess of controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.46.3-46
• /
• 2002

Most of the process control algorithms in practice are based on the finite dimensional control theory. However, many chemical processes are described by partial differential equations (PDE's) and are infinite dimensional in nature due to spatial variation. Especially when the convection is dominant and thus diffusion can be ignored, chemical processes that are described by a system of first order hyperbolic PDE's. Such processes include tubular reactors, fixed bed reactors and pressure swinging adsorption. Conventionally such infinite dimensional systems described by PDE's are controlled by finite dimensional controllers that are designed through finite dimensional reduction of the process m...

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.471-475
• /
• 1988

Pressure and flowrate control systems for a supercritical extraction process are designed and analyzed. To do this, the dynamic model was first set up using the performance equations of control valves, CO2 compressor and the state equation of the supercritical fluid. Using this model, optimum pairs of manipulated and controlled variable which give least steady stat interaction are determined though the relative gain analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.214-217
• /
• 1987

In this paper self tuning control of interconnected systems are dealt in view point of large scale system control. The plant model is given in multiple ARMA process. This process is simplified as independent SISO ARMA process having offset terms. This offset was considered as effects of interconnections. In each decentralized system, self tuning controller with instrumental variable method is adopted. As a result, this algorithm enables the parameter estimation to be unbiased and non-drift. This controller contains a new implicit offset rejection technique. Simulation results considers well with the analysis in case of linear interconnection.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.8
• /
• pp.709-712
• /
• 2015

This paper will introduce the development case study about virtual-reality-based operation training system for steel making process. Steel making process consist iron making process to create liquid steel, pig iron, by reduction process, steel making process to make molten steel by refining, continuous casting process to make slab, and rolling process to make final product like coil, plate. This steel making process deals with liquid and solid products, so facilities of steel making process are very various and complicated. In addition, according to various customer requirements, the recycle of facilities and recipes changing have been fast. So the training for skilled operators is very important point. In this paper, we develop steel making training system based virtual reality for training skilled operator. This system consists of virtual machine, virtual HMI, and virtual control panel. And for fitting the characteristics of each process and increasing the education effectiveness, we develop dynamic methods like the method of dynamic education system configuration, initial facilities setup operation education system, and etc.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.11
• /
• pp.913-919
• /
• 2005

An advanced method of Relaxed Static Stability (RSS) is utilized for improving the aerodynamic performance of modem version supersonic jet fighter aircraft. The flight control system utilizes RSS criteria in both longitudinal and lateral-directional axes to achieve performance enhancements and improve stability. Standard CLDA (Control Law Design and Analysis) process is provided that reduce the development period of the flight control system. In addition, if this process is employed in developing flight control laws, it reduces the trial and error development and verification of control laws. This paper details the design process of developing a flight control law for the RSS aircraft, utilizing military specifications, linear and nonlinea, analysis using XMATH and ATLAS(Aircraft, Tim Linear and Simulation), handling quality tests using the HQS (Handling Quality Simulator), and real flight test results to verify aircraft dynamic flight responses.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1460-1464
• /
• 2003

This paper describes the design and implementation techniques of a generic Internet based telerobotic system. The purpose is to make precious technical information and hands-on experience of the authors widely available for the research community. The paper is based on the telerobotics system that the authors recently implemented between KAIST and Saga University, Japan. In its current functionality, two control modes can be exercised; high-level supervisory control, and low-level supervisory control.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.4
• /
• pp.583-592
• /
• 1999

In order to control systems which contain nonlinearities control strategies must deal with the effects of them. Since most of control methods based on system mathematical models have been mainly developed focused on stability robustness against nonlinearities or uncertainties under the assumption that controlled systems are linear time invariant they have certain amount of limita-tions to smartly improve control perfomances of systems disturbed by nonlinearities or uncertainties. In this paper the fuzzy PID control law is suggested which can improve control performances of the nonlinear heavy load hydraulic systems disturbed by nonlinearities and uncertainties. Although the derivation process is based on the design process similar to general fuzzy logic con-troller resultant control law has analytical forms with time varying PID gains rather than linguis-tic forms so that implementation using commn-used versatile microprocessors can be achieved easily and effectively in real-time control aspect.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.9
• /
• pp.875-880
• /
• 2015

Traditional semiconductor process control has been performed through statistical process control techniques in a constant process-recipe conditions. However, the complexity of the interior of the etching apparatus plasma physics, quantitative modeling of process conditions due to the many difficult features constraints apply simple SISO control scheme. The introduction of the Advanced Process Control (APC) as a way to overcome the limits has been using the APC process control methodology run-to-run, wafer-to-wafer, or the yield of the semiconductor manufacturing process to the real-time process control, performance, it is possible to improve production. In addition, it is possible to establish a hierarchical structure of the process control made by the process control unit and associated algorithms and etching apparatus, the process unit, the overall process. In this study, the research focused on the methodology and monitoring improvements in performance needed to consider the process management of future developments in the semiconductor manufacturing process in accordance with the age of the APC analysis in real applications of the semiconductor manufacturing process and process fault diagnosis and control techniques in progress.