• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.4
• /
• pp.182-189
• /
• 2007

Process Capability indices(PCIs) have been widely used in manufacturing industries to provide a quantitative measure of process performance. PCIs have been developed to represent process capability more exactly. The traditional process capability indices Cp, Cpk, Cpm, $Cpm^+$ have been used to characterize process performance on the basis of univariate quality characteristics. Cp, Cpk consider the process variation, Cpm considers both the process variation and the process deviation from target and $Cpm^+$ considers economic loss for the process deviation from target In the previous studies, only one designated location on each part is measured. System process capability index even though in single process, multiple measurement locations on each part are required to calculate the reliable process capability. In manufacturing industry, there is growing interest in quantitative measures of process variation under multivariate quality characteristics. The multivariate process capability index incorporates both the process variation and the process deviation from target or considers expected loss caused by the process deviation from target. In this paper, we compare various process capability indices and propose the application method of PCIs.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.181-186
• /
• 2005

Because of advanced control technology, Shop floor control system of various kinds of equipment and machinery need a web based remote monitoring to control process efficiently. This paper presents the development of Operation Control System. Operation Control System(OCS) is based on intelligent web monitoring, so that OCS is improved the working condition for the line of heat treatment process and the product's quality. The developed OCS is consisted of Atmega128(MCU) based on embedded system, running the data logging of the line of heat treatment process. Web monitoring system is based on CS8900 ethernet controller and TCP/IP for remote monitoring responsibility between a server and clients and controlling the progress of entire system. The developed OCS is implemented on the line of heat treatment process and shows the improvement of environment condition, product's quality and efficiency of process line.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.1 no.1
• /
• pp.51-54
• /
• 2009

In or automotive engineering education is introduced. Main objective of the system is teaching disassemble/assemble procedure of automatic transmission of a vehicle to students, who study automotive engineering. System includes vehicle transmission, set of tools and mechanical facilities, two video cameras, computer with developed software, HMD glasses and two LCD screens. Developed software gives instructions on assembling and disassembling processes of real vehicle transmission with the help of augmenting virtual reality objects on the video stream. Overlaying of 3D instructions on the technological workspace can be used as an interactive educational material. In disassembling process, mechanical parts which should be disassembled are augmented on video stream from video cameras. Same is done for assembling process. Animation and other visual effects are applied for better indication of the current assembling/disassembling instruction. During learning and training, student can see what parts of vehicle transmission and in which order should be assembled or disassembled. Required tools and technological operations are displayed to a student with the help of augmented reality, as well. As a result, the system guides a student step-by-step through an assembly/disassembly sequence. During educational process a student has an opportunity to return back to any previous instruction if it is necessary. Developed augmented reality system makes educational process more interesting and intuitive. Using of augmented reality system for engineering education in automotive technology makes learning process easier and financially more effective.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.8
• /
• pp.659-663
• /
• 2014

Manufacturing processes of industrial tire are composed of mixing, extrusion, curing, trimming and inspecting. Among them curing is the most important process in the production of industrial tire. In this study the newly developed spring vent system was designed in order to solve rubber intrusion problem inside spring vent system in the curing process. After the experiment it is concluded that rubber intrusion was caused by angled stem head part. New spring vent system was manufactured and new design of spring vent system is proper to use for industrial tire curing process.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.4
• /
• pp.145-150
• /
• 1997

A computer-aided process design system for axisymmetric deep drawing products has been developed. An approach to the system is based on the knowledge based system. The hypothesized process outline of the deep drawing operations is generated in the geometrical design module of the system. In this paper, the module has been expanded. The rules of process design sechems for complex cup drawings are formulated from handbooks, experimental results and empirical knowhow of the field experts. The input to the system is final sheet-metal objects geometry and the output from the system is process sequence with intermediate objects geometries and process parameters, such as drawing load, blank holding force, clearance and cup-drawing coefficient.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.210-213
• /
• 2012

The recently developed military system adopts System Engineering for quality insurance. The process of military system's development basically adopts specification(MIL-STD-499) and system engineering(ISO/IEC 15288) that was developed by America. Recently the level of company's capability maturity is granted by measurement and assessment for the level of CMM or CMMI that was developed by Carnegie Mellon University. This article introduces adopted range of process that developed military system adopted additional process of CMM. This article writes range of process for military system that is developing device adopted diverse process in the future.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.664-667
• /
• 2000

Although managing knowledge about business processes has been recognized as an important aspect of Knowledge Management System (KMS), it has not been satisfactorily addressed academically or commercially. This paper proposes a KMS architecture to effectively manage business process as knowledge. It expands commonly recognized KMS functions with the process packaging module that defines business processes, monitors and evaluates process instances, keeps process instance history, and provides link between processes and other knowledge items such as documents and experts. The users can not only find the best practice of a business process but also learn from mistakes. A prototype system is implemented to show the feasibility of the proposed architecture. The results of this paper can contribute to expand current KMSs to help use knowledge to enhance the users' performance in their business processes.

• Journal of the Korean Society of Systems Engineering
• /
• v.2 no.2
• /
• pp.21-26
• /
• 2006

In modern systems technology, increasingly more systems are anticipated to operate in real-time environment. These systems are usually complex to implement since it is not easy to satisfy the real-time requirement for both hardware and software components simultaneously. In this paper, we first review an object-oriented development process that was proposed earlier for software-intensive real-time system using the Unified Modeling Language (UML). We then study how to improve the problems that the UML approach might have. Applying the systems engineering(SE) process yields useful results which include : 1) an improved requirements management over the whole system life-cycle ; 2) a detailed scenario on how to carry out the SE process ; and 3) a conversion process from the text-based requirements to the UML-based graphic ones.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.1
• /
• pp.86-95
• /
• 2013

The distribution cost increases constantly because of the growth of yield, globalization of accounts and the generalization of e-commerce. This paper is concerned with scheduling on the allocation of workers to maximize the amount of order process in warehouse logistics system. The problem is to determine the number of operators in each process by the sequential time zone. We considered that the number of operators is restricted to the current level and also the process time is changed by putting some resources into the process. In each stage, we suggest some considerations for the allocation of workers and estimate the maximum amount of order process of the alternatives. We analyzed the alternatives using simulation s/w Arena with real cases.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.3
• /
• pp.290-298
• /
• 2009

This paper proposes a novel process which can develop the system requirements in defense R&D programs. As the weapon systems become more complicated, the success and effectiveness of R&D outcome heavily depend on the application and tailoring of systems engineering process and methods. And, the accuracy and quality of system requirements are essential prerequisite to leverage the systems engineering process. To produce the artifacts of systems engineering such as OCD, ORD, and the systems requirements, the system user can write out requirement document using the proposed implementation process and templates without expending heavy work loads.