• Journal of the Korean housing association
• /
• v.21 no.5
• /
• pp.1-11
• /
• 2010

Due to the growing interest in eco-friendly and sustainable design in the architectural and urban planning field, we are witnessing numerous projects in which old buildings are being reused. However, with the exception of domestic apartments, there hasn't been a systematic approach or policy regarding the reuse of specific building types. On the other hand, we were able to point out two public building types, dong-offices and primary schools, that are expected to be underused, with future needs for conversion. Because the two building types are public buildings, we believe that their conversion must address the needs of the society. In this study, we have chosen 'social integration' as the ultimate goal of reusing public buildings. Upon the conceptual model of 'Housing-Mixed Public Facility', which was produced in a previous study, we have added other core programs that could be adopted into the model. Then, we applied the improved model onto the two building types by producing conversion plans and introducing key planning techniques. During this process, we have found some regulations that would not allow the realization of some models. Therefore, we have suggested amendments to the related regulations.

• Applied Chemistry for Engineering
• /
• v.27 no.1
• /
• pp.101-109
• /
• 2016

The purpose of this research was to develop a flat panel display device's glass etchant which can replace hydrofluoric acid. The glass etchant was composed of 18~19% wt% of ammonium hydrogen fluoride, 24~25 wt% of sulfuric acid, 45~46 wt% of water, 4~5 wt% of sulfate and 7~8 wt% of fluoro-silicate. By replenishing the etchant which has the amount of 5% of initial solution's mass, it was possible to reuse the etchant continuously. The developed etchant showed $5{\mu}m/min$ of etching rate at $30^{\circ}C$. The reusable etchant, with replenishing 5% of initial etchant mass showed the stable etching rate, which has the deviation of less than $0.1{\mu}m/min$ etching rate. The glass surface of flat panel display device created from our etching process was in good condition with any defects such as pin hole and dimple.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.10
• /
• pp.713-722
• /
• 2003

The purpose of this study was to define an interactive learning object of ILO through implementation of learning object content standardization technology for the reuse of interactive tools between learners, and to develop I(Interactive)-HTTP for the ILO to properly communicate with LMS. 1-HTTP developed here was enabled to keep connection status during the entire session by improving the existing HTTP with its stateless connection property. This ceaseless connection made it possible to provide users with the real-time interactivity between learners that happened frequently in the ILO. Also, because the I-HTTP was an expanded version of HTTP, it was possible to conduct general HTML documentation as well as ILO. In particular, the standardized launch process between LMS and ILO was embodied in adding the INIT, GETVAL, SETVAL, COMMBT, FINISH methods in the protocol, and the results from the interactivity between ILO learners were channeled to the database storage to save them through separately defined data models.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.3
• /
• pp.73-81
• /
• 2013

Various remediation methods have been applied to clean soils contaminated with pollutants. They remove contaminants from the soils by utilizing physicochemical, biological, and thermal processes and can satisfy soil remediation standards within a limited time; however, they also have an effect on the biological functions of soils by changing soil properties. In this study, changes of the biological properties of soils before and after treatment with three frequently used remediation methods-soil washing, land farming, and thermal desorption-were monitored to investigate the effects of remediation methods on soil biological functions. Total microbial number and soil enzyme activities, germination rate and growth of Brassica juncea, biomass change of Eisenia andrei were examined the effects on soil microorganisms, plant, and soil organisms, respectively. After soil washing, the germination rate of Brassica juncea increased but the above-ground growth and total microbial number decreased. Dehydrogenase activity, germination rate and above-ground growth increased in both land farming and thermal desorption treated soil. Although the growth of Eisenia andrei in thermal desorption treated soil was higher than any other treatment, it was still lower than that in non-contaminated soil. These results show that the remediation processes used to clean contaminated soil also affect soil biological functions. To utilize the cleaned soil for healthy and more value-added purposes, soil improvement and process development are needed.

• Membrane Journal
• /
• v.18 no.2
• /
• pp.109-115
• /
• 2008

To remove total dissolved solid (TDS) from wastewater, a carbon membrane system was prepared, using carbon membranes made from conductive activated carbon and poly(vinylidene fluoride) (PVDF). Using 100 ppm aqueous solutions of NaCl, $Na_2SO_4,\;MgCl_2,\;MgSO_4$, the basic properties of the carbon membranes used were studied. For the treatment of the real dye wastewater supplied from Kyungin Corp., a pilot scale carbon membrane system was also prepared, which was consisted of 240 plies of carbon membranes of $20cm{\times}20cm$ (length${\times}$width). Using the real wastewater with different TDS such as 941, 2050, 2810, 3830, 4960, 6030 ppm, prepared by the dilution of the original wastewater with pure water, the performance of the pilot scale carbon membrane system was studied. The effect of the operational conditions was studied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.5157-5164
• /
• 2010

Currently about 3.2 millon tons of waste lime are accumulated and annually 100,000 tons are producted. This study was carried out to investigate the characteristics of soil mixed with waste lime for reusing of roadbed embanking material. Waste lime used in this study is producted as a by-product in the manufacturing process of making $Na_2CO_3$ from local chemical factory in Incheon. In this study, the feasible reuse of waste lime mixed with granite weathered soil, clay, crushed rock was investigated through laboratory tests including specific gravity test, sieve analysis, hydrometer analysis, atterberg limit test, compaction test, unconfined compressive test, CBR test, permeability test, shear test, and abrasion test. The mixing rate is granite weathered soil, clay, crushed rock 80 % respectively and waste lime 20 % by weight. From the test results, it is shown that the waste lime and soil mixtures satisfy the criteria as road embanking material specification.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1153-1164
• /
• 2012

In this paper, we propose an efficient car management system based on object-oriented modeling using car number recognition and smart phone. The proposed system perceives car number of repair vehicle after recognizing the licence plate using an IP camera in real time. And then, existing repair history information of the recognized car is be displayed in DID. In addition, maintenance process is shooting video while auto maintenance mechanic repairs car through IP-camera. That will be provide customer car identification and repairs history management function by sending key frames extracted from recorded video automatically. We provide user graphic interface based on web and mobile for your convenience. The module design of the proposed system apply software design modeling based on granular object-oriented considering reuse and extensibility after implementation. Car repairs center and maintenance companies can improve business efficiency, as well as the requested vehicle repair can increase customer confidence.

• Korean Institute of Interior Design Journal
• /
• no.11
• /
• pp.45-56
• /
• 1997

In the process of modermization the problem of environment destruction has become a worldwide issue. And now this problem is a concern for all branches of science, including that of architectural desigv. This thesis tries to find the meaning of ecological architectural space, one that encreases the organic relationship, and communication, between architectrual space and urban environmental space, between human beings and architecture, and between human beings and their environment. As an example, we will take a look at the architectural space-design of Frei Otto, who offers diverse creative ecological architectural forms. His concept of architecture has the critical character when compared with the traditionan conventional concept of architecture. The ecological characteristics of his architectural spacedesign can be summarized as follows: The first characteristic is his ample use of natural objects in the architectural structure. An ample use of living things like trees and plants as well as of inanimate thing like water, wind as architectural elements enhances the functional efficiency of architecture. The second characteristic is its ecological architectural system, which saves energy faciliates ventilation by changing the position and direction of the building, by systematically applying the materials, and by efficiently arranging the inner space. The third characteristic is the dematerialization of architecture and the use of materials that are economical and appropriate for the circulation system of nature. The use of natural elements and recycling natural objects, makes it possible to reuse materials of the destroyed building. In short, the ecological architecture of Frei Otto, which shows the relation between human beings and architecture, presents diverse possibilities of the archtectural space as a complex natural system, which is more than a simple combination of separatge elements.

• Journal of KIISE:Software and Applications
• /
• v.31 no.11
• /
• pp.1455-1473
• /
• 2004

This paper suggests a technique, TELOR(Technique of Object Extraction Based on Legacy System Interface for Improvement of Object Reusability) for reuse and reengineering by analyzing the Legacy System interface to distill the meaningful information from them and disassemble them into object units which are to be integrated into the next generation systems. The TELOR method consists of a 4 steps procedure: 1) the interface use case analysis step, 2) the interface object dividing step, 3) the object structure modeling step, and 4) the object model integration step. In step 1, the interface structure and information about the interaction between the user and the Legacy System are obtained. In step 2, the interface information is divided into semantic fields. In step 3, studies and models the structural and collaborative relationship among interface objects. Finally, in step 4, object model integration step, integrates the models and improves the integrated model at a higher level. The objects integration model created through TELOR provides a more efficient understanding of the Legacy System and how to apply it to next generation systems.

• Korean Journal of Community Nutrition
• /
• v.12 no.6
• /
• pp.815-825
• /
• 2007

The study was designed to investigate food waste management practices and to identify factors affecting food waste generation at school food services. A total of 202 dietitians employed at elementary schools participated in the survey. The mean food waste weight per school was 77.54 kg, forty percent of the schools generated food waste of $50{\sim}100kg$ every day and 53% generated plate waste less than 50 kg. Three quarters of the dietitians perceived plate waste as a major component of the food waste and vegetable dishes were a major source of the plate waste. Half of the dietitians used a food waste pick-up service for waste disposal, which was the most preferred waste disposal method. Approximately 90% of the dietitians conducted education on plate waste reduction for students but their perceptions on the effectiveness of the education was inconsistent. The contents were environmental issues (70.3%) and unbalanced food choice (56.7%). According to factor analysis based on performance score, solid waste management practices were grouped into 'information collecting and education', 'supervision of production process', 'cooperation with related groups', and 'control over production planning'. Practices appertaining to 'cooperation with related groups', 'information collecting and education' factor need to be improved. Dietitians should pay attention to 'recycle and reuse of left over' practice. Waste generation differed significantly by dietitians' ages and working experience. In order to reduce plate waste, more effective education materials and methods need to be developed and support from principals, teachers, and parents is necessary.