• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.3
• /
• pp.44-53
• /
• 2011

Siloxane, organo-silicon compound, is used in the various forms of products such as cosmetics and detergents due to its quality physical chemistry attributes. Siloxane included in landfill gas which is caused in the process of decomposing of such products after landfill has imposed negative impacts on the operation of landfill gas utility facilities. The objective of this study was to investigate the siloxane production characteristics depending on the features of various landfill site in Korea so that the analysis was made on the landfilling age and landfill waste by in terms of its concentration, structure and composition. As for the concentration of siloxane depending on time passage, 12 landfill sites were reviewed by landfilling age. As for production attributes change of siloxane by landfill wastes, the source of wastes, physical production ration and siloxane concentration were compared in 6 landfills. The average concentration of total-siloxane within LFG is $6.75mg/m^3$ and cyclic-siloxane out of it occupies over 93%. By element, D4 and D5 in order take the highest proportion regardless of total-siloxane concentration and landfilling age. Even though this study is not able to verify the different impact of each kind of wastes on the generation of siloxane, it is confirmed that total-siloxane and cyclic-siloxane decrease in line with the increase of landfilling age as it does in the first order decay model for landfill gas.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.417-428
• /
• 2021

The combustion characteristics of anthracite, which follow a complex process with low reactivity, must be considered through the dynamic behavior of circulating fluidized bed (CFB) boilers. In this study, computational fluid dynamics (CFD) simulation was performed to analyze the combustion characteristics of anthracite in a pilot scale 0.1 MW_th Oxy-fuel circulating fluidized bed (Oxy-CFB) boiler. The 0.1MW_th Oxy-CFB boiler is composed of combustor (0.15 m l.D., 10 m High), cyclone, return leg, and so on. To perform CFD analysis, a 3D simulation model reactor was designed and used. The anthracite used in the experiment has an average particle size of 1,070 ㎛ and a density of 2,326 kg/m³. The flow pattern of gas-solids inside the reactor according to the change of combustion environment from air combustion to oxygen combustion was investigated. At this time, it was found that the temperature distribution in air combustion and oxygen combustion showed a similar pattern, but the pressure distribution was lower in oxygen combustion. addition, since it has a higher CO₂ concentration in oxygen combustion than in air combustion, it can be expected that carbon dioxide capture will take place actively. As a result, it was confirmed that this study can contribute to the optimized design and operation of a circulating fluidized bed reactor using anthracite.

• Korean Journal of Community Nutrition
• /
• v.24 no.4
• /
• pp.277-289
• /
• 2019

Objectives: This study examined the practices of a community meal program for older adults in rural areas during the agricultural off-season. Methods: A survey was conducted from December 12 to December 22, 2016. Self-administered questionnaires were distributed to 150 cooking volunteers, who had participated in the community meal program in 50 villages. A total of 114 responses were returned from 44 villages and used for data analysis. In addition, in-depth interviews were conducted with the volunteers of eight villages. Results: Most of the cooking volunteers were 50 years old or older and they participated in serving older adults meals for good will. The cooking volunteers perceived that the older adults in their community did not eat various foods, had difficulties in grocery shopping, and frequently consumed salty foods. During the agricultural off-season, 40.9% of villages served the older adults meals 6-7 days a week and 95.5% provided meals for lunch. An average of 21 to 40 older adults were served meals in each village. The cooking volunteers reported that the food preparation and meal service times were sufficient, recipes provided were useful, and menus met the preference of the older adults. At the end of the program, they felt proud of serving meals for older adults in the community. An increased awareness of healthy eating, interest in health, and consumption of nutritious meals, a decrease in loneliness among older adults, and the promotion of fellowship in the community were rated highly. The cooking volunteers expected additional support for cooking personnel and insisted that the program should be provided for the entire agricultural off-seasons. Conclusions: The community meal program during the agricultural off-season for the elderly in rural areas was effective in improving the dietary life of older adults, relieving their feelings of isolation, and promoting fellowship of the community. The volunteers felt workload due to a shortage of volunteers but answered that they were rewarded by helping older adults in their community.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.4
• /
• pp.153-161
• /
• 2018

This paper describes the performance improvement of Software (SW) digital filter using GPU (Graphical Processing Unit). The previous developed SW digital filter has a problem that it operates on a CPU (Central Processing Unit) basis and has a slow speed. The GPU was introduced to filter the data of the EAVN (East Asian VLBI Network) observation to improve the operation speed and to process data with other stations through filtering, respectively. In order to enhance the computational speed of the SW digital filter, NVIDIA Titan V GPU board with built-in Tensor Core is used. The processing speed of about 0.78 (1Gbps, 16MHz BW, 16-IF) and 1.1 (2Gbps, 32MHz BW, 16-IF) times for the observing time was achieved by filtering the 95 second observation data of 2 Gbps (512 MHz BW, 1-IF), respectively. In addition, 2Gbps data is digitally filtered for the 1 and 2Gbps simultaneously observed with KVN (Korean VLBI Network), and compared with the 1Gbps, we obtained similar values such as cross power spectrum, phase, and SNR (Signal to Noise Ratio). As a result, the effectiveness of developed SW digital filter using GPU in this research was confirmed for utilizing the data processing and analysis. In the future, it is expected that the observation data will be able to be filtered in real time when the distributed processing optimization of source code for using multiple GPU boards.

• Management & Information Systems Review
• /
• v.38 no.3
• /
• pp.151-170
• /
• 2019

This study deals with the rent-seeking behavior that exist in cultural voucher from the viewpoint of culture and arts management. Art organizations open to consumers, producers and governments of the arts are dependent on the internal and external influence of an open system. Researcher has found rent-seeking in the course of introducing policies and legalization of the cultural voucher business which has been promoted in the direction of democratization of culture or cultural democracy. Cultural voucher business is a legal term. Although the government has increased the budget or tried to change the policies of the cultural voucher business, the implementation of the cultural voucher business has been opposed to the diversity of consumption and equity as the consumption of genre and the concentration of the capital region have increased. These results were structurally related to the process of legalization and rent-seeking behavior in bureaucracy. This study reaffirms that the efficient operation standard of the cultural voucher business is a balance between the choice of the beneficiary, the competition of the supplier, and access to the cultural voucher. And the theory of rent-seeking was applied as a criterion to analyze this balance. Thus, it is suggested that the criteria of evaluation and improvement to check the conservativeness of bureaucrats are needed to establish a legal system applied to the purpose of 'cultural democracy' and 'democratization of culture' ideology and to guarantee individual creativity and autonomy.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.1
• /
• pp.157-179
• /
• 2019

The Seoul's 2030 Youth-Housing has been regarded as the only option to procure rental housing sites in downtown Seoul. But its supply did not catch up with the initial expectation, and the criticism that it may disrupt the current zoning system of the city has persisted. Consequently, the 2030 Youth-Housing policy has undergone amendments for six times within the last three years, and the significant changes in its guideline also have been made within the last one year. The study, in this context, tries to figure out the tendencies of those changes made in the guidelines so far by analyzing the aspects of the parcels allowable for Youth-Housing as well as the areas allowable for up-zoning. In the process, the propositional logic is to be adopted to draw the scope of the buildable areas for Youth-Housing. For this, the study refines the raw GIS data, inputs the values for each proposition, and proceeds the logical operation to judge every parcel of the city to discern whether it is eligible for a buildable site and/or for up-zoning for Youth-Housing. It is seen that: 1) the buildable sites rather evenly distribute around the peripheral subway-station areas while more concentrating on the quasi-residential and commercial areas; and 2) the areas eligible for up-zoning have the tendency to concentrate more on quasi-residential areas than others.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.55-62
• /
• 2021

The productivity of rebar-work and form-work was analyzed with data collected from an actual high-rise construction project, and the actual utilization rates of three tower cranes were also investigated. It was found that the average productivity of the form-work increased from 12.00~8.71(㎡/man·day) in the underground and above-ground/lower-floor to 11.94~20.73(㎡/man·day) in the standard floor. Comparing the productivity of core area to outer, the former was found to be about 11% higher. Moreover, the rebar-work productivity of the outer area(1.12 ton/man·day) was approximately 9.6% higher than that of the core area for the standard floor. The average utilization rates of three TC were surveyed to be about 63.49%, and it was revealed that rainy weather(6.1%), strong winds(6.1%), holidays(17.8%), TC lifting work(5.8%), and other failures and repairs(0.07%) were the causes of non-operation. These research results are expected to be beneficial data in planning and managing the process of high-rise RC construction works in the future.

• The Journal of the Korea Contents Association
• /
• v.21 no.5
• /
• pp.488-498
• /
• 2021

This study applied Flipped Learning teaching and learning method to Basics Cooking Practice Subject using YouTube. The purpose of this study is to investigate whether the curriculum is properly progressing by grasping the effects of before and after learning and analyzing learners' subjectivity through the learning process. The investigation period was conducted from August 01, 2020 to September 10, 2020. According to the research design of Q Methodology, it was divided into five stages: Q sample selection, P sample selection, Q sorting, coding and recruiting, conclusion and discussion. As a result of the analysis, the first type (N=5): Prior Learning effect, the second type (N=7): Simulation practice effect, and the third type (N=3): self-efficacy effect. As a result, by applying the flipped learning teaching method of the Basics Cooking Practice Subject using YouTube, positive effects such as inducing interest in the class and increasing confidence were found in active learners, but some learners lacked understanding of the system of the class operation method. However, the lack of number of training sessions compared to other subjects is considered to be a solution to be solved later.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.153-160
• /
• 2022

This study presents the bogie arrangement of the load-out system for on-ground shipbuilding. The load-out system is one of the most important systems to perform the bogie arrangement of the on-ground shipbuilding technique without dry dock facilities, and this system is composed of four pieces of equipment: bogies, driving bogie with motors, trestles, and power packs. Also, the bogie arrangement analysis (BAA) is employed to simply calculate the reaction forces at the trestle for structural safety. In this context, the purpose of this study is to propose an optimal design method to perform the bogie arrangement satisfying structural safety requirements with minimal cost. It is expected that the proposed methodology will contribute to the effective practice as well as to the improvement of competitive capability for shipbuilding companies at the on-ground shipbuilding stage. Furthermore, we describe some problems and their solutions of the deformation that may occur in the bottom of the hull during the load-out process. As a result, it is shown that we applied it to the 114K crude oil tanker (Minimum bogie 54EA) and the 174K CBM LNG carrier (Minimum bogie 88EA), it can minimize the number of bogie and critical risks (Safety rate 1.61) during the load-out of on-ground shipbuilding. Through this study, the reader will be able to learn successful load-out operation and economic shipbuilding in the future.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.8
• /
• pp.11-16
• /
• 2022

The compaction process using vibrating rollers in road construction is essential to increase soil stiffness in earthworks. Currently, there is no clear standard for the operation method of the compaction roller during compaction. Although simple quality inspection techniques have been developed, plate load test (PLT) and field density test (FDT) are the most frequently used test methods to evaluate the degree of compaction during road construction as the most frequently used quality inspection methods. However, both inspection methods are inefficient because they cannot perform quality inspection in all sections due to time and cost reasons. In this study, we analyzed how the operating conditions of vibrating rollers affect the compaction quality. An intelligent quality management system, which is a currently developed and commercialized technology, was used to obtain quality inspection results in all sections. As a result of the test, it was analyzed that the speed and vibration direction of the compaction roller had an effect on the compaction degree, and it was found that the compaction direction had no effect on the compaction degree.