• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.157-163
• /
• 2000

Testing evaluation is a part of process for design, production, evaluation, operation and abolition, and is the process of certifying system performance. The main purpose of testing evaluation is to reduce the risk factor under the determining process. Testing process has the three step such as design qualification, integration and validation test in factory, system integration and commissioning test. Design Qualification is to verify errors on the design process. Integration and validation test in factory is for the H/W and S/W of an equipment and is to verify interface of subsystem, communication protocol and main functions. System integration and commissioning test is a functional test to adjust successful installation of equipment. According to the testing process, briefly consideration for test item, test method and test contents about signalling system is carried out.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.297-312
• /
• 2016

The current government strives to train those supposed to drive the national economy, and bridge the gap between qualification and industrial sites through competency-based qualification systems, not the educational background. In this regards, the government is planning to adopt the course evaluation qualification system. The course evaluation qualification system, on a basis of the NCS, is a system to qualify certain people completing the education and training fulling a specific requirement for a national technical qualification in case they meet the internally and externally assessed criteria. This can be seen as an attempt to practically link between job training and qualifications. The NCS model and learning module in the cadastral field are already utilized as the training and eduction in the specialized school and colleges. However, the current national technical qualification system is considered as a main system because the course evaluation qualification system has not been introduced yet. This study analyzed the process of the course evaluation qualification system, and conducted a survey to solicit feedback on introduction of course evaluation qualification system, Besides, the NCS evaluation model is presented in order for the introduction of course evaluation qualification system in the cadastral fields.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.1
• /
• pp.5-20
• /
• 2023

The government is operating a course evaluation-type qualification system for the purpose of overcoming the limitations of the test-type qualification system and cultivating talents with practical skills applicable to related industries. However, there is a part that does not match the purpose of the course evaluation qualification system by educating competency units in the field of surveying rather than the field of cadastral field in the education and training course of the course evaluation qualification. Therefore, this study closely analyzed the course evaluation qualification system in the cadastral field and suggested improvement plans accordingly. First, NCS in the cadastral field has not been supplemented or developed since its development in 2014, and there are many parts that do not conform to the current laws, so supplementary development is necessary. Second, It was proposed to improve the optional competency unit in the field of surveying to the NCS competency unit in the cadastral field. In addition, if the 12 competency units of the current NCS in the cadastral field are designated as essential competency units and education and training are operated, it will be possible to foster working-level talents with sufficient competency at the cadastral engineer level. However, for practical system operation and application, supplementation and development of NCS in the cadastral field, which is used for education and training of the course evaluation qualification system, must be preceded.

• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.240-248
• /
• 2020

This study compares and analyzes the tasks and evaluation methods of national technically qualified Skin Esthetic through systematic literature review of prior studies on qualification tests for Skin Esthetic qualification and process evaluation types that have been reorganized based on NCS. The national technical qualification is based on the ability to work through memorization-oriented theoretical tests and simple repetition of functions, and the Qualified qualification is relatively short in the period of test execution, and the reliability of its internal evaluation at the enforcement agency continues to be reduced. In the future, national technical qualification require innovation in the qualification system to reflect skilled demand at industrial sites, and course-based qualification for require supplementation and improvement of education and training courses so that they can learn skilled skills at the site.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.553-556
• /
• 2018

This study proposes a 'NCS-based corporate qualification system for elementary and maintenance tasks manual' applicable to industry in order to establish standards for corporate qualification system which perform education and evaluation for industry-specialized technic, and for corporate qualification system which practice structured training for corporate specialized tasks to reflect the demand of industries' on-site training more precisely, and set up standardized policy and process manuals within various corporations in order to improve credibility and objectivity. Prior research has focused on on-site visits to companies and institutes in Japan that employ corporate qualification systems. Research analyses on current practices, structures and outcomes of qualification systems, online, and 1:1 interviews with administrators responsible for qualification systems, which lead to simulate the qualification system for elementary and maintenance tasks model of NCS and corporate, and establish NCS based corporate qualification for elementary and maintenance system manual, and suggested recommendation to promote this standard manual for use by analyzing current practices.

• Journal of Digital Convergence
• /
• v.19 no.3
• /
• pp.37-45
• /
• 2021

Since the Syrian Civil War in 2011, the number of refugees has been on the rise in Korea as well as worldwide. In addition to recognition of legal status for refugees, employment and education support, and qualification recognition are emerging as social issues. In this context, this study aims to compare the cases of Netherlands and Norway in terms of evaluation and recognition of refugees' qualifications. The findings of the study show that although there were concerns about the lack of official documents to verify the qualifications of refugees, the two countries have developed a special process for the evaluation and recognition for refugees respectively according to the Lisbon Recognition Convention. In addition, both countries have developed a recognition of prior learning system which has made the qualification recognition process flexible from a point of refugees. These experiences could be used as benchmarks for the Korean government which has a responsibility to develop its own qualification recognition system for refugees in the near future.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.191-202
• /
• 2017

The purpose of this study is to develop an engineer competency model using Analytical Hierarchy Process (AHP) to improve the national technical qualification system. Korea has managed technical human resources at the government level through the operation of a national technical qualification system that certifies engineers with national certificates or technical grades by laws. However, there have been increasing concerns that the government system is separated from global standards and does not reflect an engineer's comprehensive capabilities. For these reasons, the new architecture of the system has been continuously discussed and becomes a major policy issue of the Korean government. For the development of the engineer competency model, domestic and global models were separately structured using 554 valid questionnaires with a consistency ratio (CR) of 0.1 or less. The relative importance of engineer competency factors in a domestic model was career (0.383), qualification (0.253), academic degree (0.195), and job training (0.169) whereas the order in the global model was career (0.308), global ability (0.237), job training (0.175), domestic qualification (0.147), and academic degree (0.134). The results of AHP analysis indicated that the evaluation factors and methods recognized by engineers were different from a current government model focusing on domestic qualifications. There was also perceptual difference in the importance of engineer evaluation factors between groups depending on the type of organizations and markets. This means that it is necessary to reflect the characteristics of organizations and markets when evaluating engineer competency. Based on AHP analysis and literature reviews, this paper discussed how to develop a new engineer competency index (ECI) and presented two effective index models verified by simulation test using 59,721 engineers' information. Lastly, the paper discussed major findings of our empirical research and proposed policy alternatives for the improvement of a national engineer qualification system. The paper contributes to the management of technical human resources since it provides quantitative competency models that are objectively developed by reflecting market recognition and can be effectively used by the policy makers or firms.

• Journal of Applied Reliability
• /
• v.13 no.3
• /
• pp.165-174
• /
• 2013

Thruster break for aerogenerator performs a role that is stopping the rotor in case of emergency such as strong wind, system abnormality or maintenance check. In this study, failure analysis and test evaluation on the thruster break for aerogenerator are proposed, and the entire process to improve reliability of the product through design improvement is presented. The typical failure case is fatigue and wear, and failure cause on these are identified and improvement plan is presented. Lastly, reliability improvement is established to analyse test results before after the life test.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.29-33
• /
• 2008

According to statistics released by the Ministry of Labor for the past 6 years, work-related accidents in the construction industry have been on the continued increase, resulting in social and economic losses that are difficult to determine at an exact amount. However, the number will likely get much bigger if unreported cases are included, considering the fact that the aforementioned statistics are based soley on the applications filed with Korea Workers' Compensation and Welfare Service. The practice of businesses choosing not to report and dealing with industrial accidents in an unauthorized manner is defined as "concealment of industrial accident". The reason the employers tend to engage in the concealment practice even at their huge cost is a "pre-qualification" scheme for the applicants in the government procurement process. Under the pre-qualification scheme, the applicants with a high rate of industrial accidents receive a low grade and become less attractive candidates in the procurement process, thus losing an opportunity to win a contract. Such failure relates directly to the fate of business organizations, to survive or not. That is why they are making all-out efforts to obtain a high grade in the pre-qualification evaluation. With regard to the accident-concealment problem, the following can be mentioned as preventive measures: (1) To exclude a rate of industrial accidents from the pre-qualification scheme; (2) To strengthen the institution of imposing penalties on the occurrence of industrial accidents; (3) To introduce private insurance system to the current industrial accident compensation insurance; and (4) To give non-recognition treatment to industrial accidents that were not reported upon occurrence. In conclusion, the concealment problem can be resolved if the aforementioned measures are to be taken continuously along with corrective measures against institutional deficiencies.

• Korean Journal of Childcare and Education
• /
• v.12 no.4
• /
• pp.151-181
• /
• 2016

This study examined professional development systems in America, England, and Australia, and devised ways to enhance early childhood teachers' professional development in Korea. To suggest effective ways to improve current professional development system and its operation, this research aimed to investigate first, advanced professional development systems and policies in three countries, America, England, and Australia, second, the process of teacher qualification and requirements for acquiring teacher credential and its maintenance, and lastly, the effort of quality control for professional development, its operation, and evaluation systems in three countries. Based on the analysis of the three country's systems, five solutions for effective professional development are suggested. First, it is necessary to differentiate requirements for teachers by the level of teacher credentials. Second, an incessant training process for professional development is required. Third, an individualized professional development plan should be set for an individual teacher for the best outcomes in professional competence. Fourth, instructors for professional development trainings are needed to ensure the quality of training. Lastly, individuals, organizations, and policy and its operation systems need to be considered holistically as a whole in the perspective of convergence in policy making and its operation for effective professional development.