• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.111-111
• /
• 2003

In our experiments using a new apparatus, the drape formation process was found to consist of three stages, seeds generation, their development and the final stabilizing stages. A new parameter R evaluating the shape of the drape was defined in terms of the vertical projection of the drape. Both drape coefficient and R-parameter are expected to be useful for analyzing the formation process of the fabric drape quantitatively.

• Proceedings of the KWS Conference
• /
• 2000.10a
• /
• pp.43-45
• /
• 2000

Resistance Spot Welding has been one of the important process in the sheet metal fabrication of auto-body industry It is well known that the nugget formation of RSW is the major factor for the strength of the body. A high speed camera was used to consider initial melting and growth of the weld nugget in order to find out the nugget formation mechanism. It was observed that such mechanism had an effect on the dynamic resistance, which was a process parameter of resistance spot welding. Also, the relationship between the mechanism and process parameter was considered for the industrial application.

• Journal of applied mathematics & informatics
• /
• v.33 no.1_2
• /
• pp.203-210
• /
• 2015

We consider fractional Brownian motion and FARIMA process with Gaussian innovations and show that the suitably scaled distributions of the FARIMA processes converge to fractional Brownian motion in the sense of finite dimensional distributions. We figure out ACF function and estimate the self-similarity parameter H of FARIMA(0, d, 0) by using R/S method. Finally, we display power spectrum density of FARIMA process.

• Journal of Welding and Joining
• /
• v.20 no.2
• /
• pp.102-108
• /
• 2002

Resistance spot welding of aluminum alloys is based upon Joule heating of the components by passing a large current in a short duration. Since aluminum alloys have the potential to replace steels fur automobile body assemblies, it is important to study the process robustness of aluminum spot welding process. In order to evaluate the effects of process parameters on the weld quality, major process variables and abnormal process conditions were selected and analyzed. A newly developed two-stage, sliding-level experiment was adopted fur effective parameter design and analysis. Suitable ranges of welding current and button diameters were obtained through the experiment. The effects of the factors and their levels on the variation of acceptable welding current were considered in terms of main effects. From the results, it is concluded that any abnormal process condition decreases the suitable current range in the weld lobe curve. Pareto analysis of variance was also introduced to estimate the significant factors on the signal-to-noise (S/N) ratio. Among the six factors studied, fit-up condition is found to be the most significant factor influencing the SM ratio. Using a Pareto diagram, the optimal condition is determined and the SM ratio is significantly improved using the optimal condition.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.1E
• /
• pp.31-37
• /
• 2001

Matched Field Processing (MFP) is a successive process of correcting mismatches between true and assumed parameters by matching the measured acoustic field data with numerically simulated data which we call replica. The MFP is widely used both in geo-acoustic parameter inversions and in source localizations. Whether a certain parameter can be inverted effectively or whether a source can be localized correctly depends on the amount of the influence that a parameter has on the acoustic field during the matching process. Sensitive parameters can be better estimated than the less sensitive ones in MFP. On the contrary, the sensitive parameters affect adversely on the source localization results when they have uncertainties. In this paper, a sensitivity index is defined based upon the field variation resulting from the perturbed parameters. Numerical test results show that the index behaves in accordance with the results of source localization under a mismatched environment and also with the inversion solutions.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.395-400
• /
• 2015

Obtaining the parameters for PID controllers based on limit cycle information for the process in a relay controlled feedback loop has become an accepted practical procedure. If the form of the plant transfer function is known, exact expressions for the limit cycle frequency and amplitude can be derived so that their measurements, assumed error free, can be used to calculate the true parameter value. In the literature, parameter estimation for an assumed form of the plant transfer function has generally been considered for disturbance free cases, except a recently published work of the author. In this paper additional simulation results are reported on exact parameter estimation from relay autotuning under static load disturbances.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.2
• /
• pp.38-44
• /
• 2008

In the present paper, we theoretically analyze the flow of magnetic fluids in a circular pipe with a vertical magnetic field and investigate the magnetic response by the external magnetic field. Theoretical study through the governing equation derived by Siliomis is carried out with numerical analysis by the Gauss Elimination Method. Using polar and magnetic effect parameters, theoretical equations and distributions for the velocity, apparent viscosity as the magnetic response are shown. Especially, in the region of strong magnetic field the specific property is appeared by finding a critical magnetic effect parameter for a polar effect parameter.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.4
• /
• pp.60-65
• /
• 2002

In order to generate hull form, we introduced optimization process. Fairness criteria is applied to object function, B-Spline control vertices are considered as design variables, optimization is proceeded with satisfying geometric constraint conditions. GA(Genetic Algorithm) and optimality criteria are applied to optimization process in this study.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.134-136
• /
• 2001

In this paper, using equivalent circuit of BLDC motor in the 30W class, process of modeling the BLDC motor and calculating the parameter is shown. Through run-down-test and measuring back EMF, torque, speed and ampere, parameter that transfer function requires was gotten. In this result, for step response of BLDC motor, comparing the actual result obtained by circuit experiment with the simulation result obtained by substituting this parameter into the transfer function, it was established that process calculating parameters in this study is proper.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.5
• /
• pp.263-267
• /
• 2016

In this paper, we analyzed the electrical characteristics of NPT planar and trench gate IGBT after designing these devices according to design and process parameter. To begin with, we have designed NPT planar gate IGBT and carried out simulation with T-CAD. Therefore, we extracted design and process parameter and obtained optimal electrical characteristics. The breakdown voltage was 724 V and The on state voltage drop was 1.746 V. The next was carried out optimal design of trench gate power IGBT. We did this research by same drift thickness and resistivity of planar gate power IGBT. As a result of experiment, we obtain 720 V breakdown voltage, 1.32 V on state voltage drop and 4.077 V threshold voltage. These results were improved performance and fabrication of trench gate power IGBT and planar gate Power IGBT.