• 한국농공학회논문집
• /
• 제55권5호
• /
• pp.49-58
• /
• 2013

Appropriate random variables and probability density functions based on statistical analysis should be defined to execute reliability analysis. Most studies have focused on only normal distributions or assumed that the variables showing non-normal characteristics follow the normal distributions. In this study, the reliability problem with non-normal probability distribution was dealt with using the convolution method in the case that the integration domains of variables are limited to a finite range. The results were compared with the traditional method (linear transformation of normal distribution) and Monte Carlo simulation method to verify that the application was in good agreement with the characteristics of probability density functions with peak shapes. However it was observed that the reproducibility was slightly reduced down in the tail parts of density function.

• Journal of electromagnetic engineering and science
• /
• 제8권2호
• /
• pp.59-63
• /
• 2008

The adaptive symbol selection scheme(ASSS) is popular in reducing peak to average power ratio(PAPR) for orthogonal frequency division multiplexing(OFDM) signals. The probability density function(pdf) of the samples' amplitudes of the adaptively selected OFDM signal without over-sampling has been considered to be approximately equal to the Rayleigh pdf. In this paper, we derive a more precise pdf which shows the relationship between the probability distribution of the samples' amplitudes and the number of the candidate symbols for ASSS. Using the newly derived pdf in the theoretical analysis, more accurate calculation results can be obtained.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.492-501
• /
• 1994

This study is an analysis of the turbulent diffusion flame with swirl flow and the calculated results are compared with experimental data in case of various swirl numbers and air-fuel rations. The mathematical model is restricted to single-phase, diffusion controlled combustion with swirl flow. Values of local flow properties were obtained by solving appropriate differential equation for continuity, momentum, stagnation enthalpy, concentration, turbulence energy, dissipation rate of turbulence energy, and the mean square of concentration fluctuation. The method is proposed for calculating the local probability of chemical reaction based on the use of the probability density function for the mixture fraction.

• 한국통신학회논문지
• /
• 제25권1A호
• /
• pp.48-55
• /
• 2000

본 논문에서는 모의 실험을 통하여, 데이터의 분포가 Gauss 분포, 균등 분포 등의 경우, 어느 한 구간이 다른 구간에 비하여 확률도 크고 구간내의 오차도 크다면 이는 최적 양자화가 아니다라는 가정을 하였다. 이 가정을 LBG 알고리즘에 추가하여 수정된 LBG 알고리즘을 만들고, 이 알고리즘의 성능을 측정하였다. 수정된 알고리즘에 의한 코드 북의 오차는 본래의 알고리즘에 비하여 오차의 크기도 감소하였고, 오차의 편차도 감소하였다.

• 한국군사과학기술학회지
• /
• 제12권1호
• /
• pp.1-7
• /
• 2009

Tracking and detecting targets by the M/W seeker is affected by the clutter reflecting from the earth's surface. In order to detect the look-down retreating targets, which appear in the sidelobe clutter region, in the M/W seeker of High PRF mode, it is necessary to understand statistical characteristics of the surface sidelobe clutter. Statistical analysis of sidelobe clutter is conducted for several configurations of the surface using data obtained by the CFT (Captive Flight Test) of the M/W seeker in High PRF mode. The probability density function(PDF) fitting is conducted for several configuration and conditions of the surface. PDFs and PDF parameters, which best describe statistical distribution of sidelobe clutter, are estimated.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.192-200
• /
• 1994

The methodology of a simple probabilistic fatigue crack under random loading is proposed. Using the crack closure concept, the crack opening stress is assumed to be constant during random loading. The loading history was analyzed to determine the probability density functions, probability distribution functions and other related parameters for the probabilistic fatigue crack growth analysis. Fatigue crack growth using the exisiting available data was predicted by the proposed probabilistic analysis and compared with experimental data.

• 한국해안·해양공학회논문집
• /
• 제24권1호
• /
• pp.1-9
• /
• 2012

조위편차는 최근 기후변화에 의한 영향으로 연안 안전 방재 측면에서 매우 중요한 인자로 부각되고 있다. 태풍강도 등과 더불어 변화가 예상되는 조위편차는 해안구조물의 안전 및 기능검토에 필요한 기준해수면 결정에 기여하는 중요한 인자이다. 우리나라 연안 조위편차의 확률밀도함수는 음 양의 왜도와 정규분포보다 큰 돌도를 가지는 분포로, 정규분포로 근사화하는 방법은 한계가 있기 때문에 본 연구에서는 비모수적 방법인 Kernel 함수를 이용하여 확률밀도함수를 추정 제안하였다. 본 연구에서 제안된 확률밀도함수는 조위편차자료의 분포와 매우 우수한 일치수준을 보이고 있으며, 다양한 극값 추정에도 높은 수준의 정도를 보여주고 있다.

• Journal of the Korean Data and Information Science Society
• /
• 제20권1호
• /
• pp.191-202
• /
• 2009

In this study, we drive the one dimensional marginal transform function, probability density function and probability distribution function for the random variables $T_{{\xi}N}$ (Time taken by the servers during the vacations), ${\xi}_N$(Number of vacations taken by the servers) and ${\eta}_N$(Number of customers or units arrive in the system) by controlling the variability of two random variables simultaneously.

• International Journal of Reliability and Applications
• /
• 제14권2호
• /
• pp.107-114
• /
• 2013

Modelling of failures is an important element of reliability modelling. Empirical modelling approach suitable for complex item is explored in this paper. First step of the empirical modelling approach is to plot hazard function, density function, Weibull probability plot as well as cumulative intensity function to see which model fits best for the given data. Next step of the empirical modelling approach is select appropriate model for the data and fit the parametric model accordingly and estimate the parameters.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1290-1299
• /
• 1990

본 연구에서는 이러한 개념을 확장하여 직경이 26nm와 38nm인 두 개의 수평관 내 기액 2상유동에서 오리피스의 차압교란치의 확률밀도함수, 자기상관함수와 파워 스 펙트럼 밀도함수를 구하여 유동양식에 따른 이 들 통계치의 특성을 구명하였다. 본 연구에서 다룬 유동양식은 기포, 플러그, 슬러그, 성층, 파상, 환상, pseudo-slug 유 동이다. 이 결과 차압교란치의 통계적 해석을 통한 유동양식 판별법이 매우 유용하 다는 사실을 밝혔으며, 또 본 판별법을 관내 압력강하치의 통계적 해석을 통하여 유동 양식을 구분한 타 연구자들의 방법과 비교 분석하였다.