• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.15.2-15.2
• /
• 2009

Manufacturing of printed electronics using printing technology has begun to get into the hot issue in many ways due to the low cost effectiveness to existing semi-conductor process. This technology with both low cost and high productivity, can be applied in the production of organic thin film transistor (OTFT), solar cell, radio frequency identification (RFID) tag, printed battery, E-paper, touch screen panel, black matrix for liquid crystal display (LCD), flexible display, and so forth. The emerging technology to manufacture the products in mass production is roll-to-roll printing technology which is a manufacturing method by printings of multi-layered patterns composed of semi-conductive, dielectric and conductive layers. In contrary to the conventional printing machines in which printing precision is about $50~100{\mu}m$, the printing machines for printed electronics should have a precision under $30{\mu}m$. In general, in order to implement printed electronics, narrow width and gap printing, register of multi-layer printing by several printing units, and printing accuracy of under $30{\mu}m$ are all required. We developed the roll-to-roll printing equipment used for printed electronics, which is composed of un-winder, re-winder, tension measurement system, feeding units, dancer systems, guide unit, printing unit, vision system, dryer units, and various auxiliary devices. The equipment is designed based on cantilever type in which all rollers except printing ones have cantilever types, which could give more accurate machine precision as well as convenience for changing rollers and observing the process.

• Journal of Powder Materials
• /
• v.31 no.2
• /
• pp.119-125
• /
• 2024

The n-type Bi_2-xSb_xTe₃ compounds have been of great interest due to its potential to achieve a high thermoelectric performance, comparable to that of p-type Bi_2-xSb_xTe₃. However, a comprehensive understanding on the thermoelectric properties remains lacking. Here, we investigate the thermoelectric transport properties and band characteristics of n-type Bi_2-xSb_xTe₃ (x = 0.1 - 1.1) based on experimental and theoretical considerations. We find that the higher power factor at lower Sb content results from the optimized balance between the density of state effective mass and nondegenerate mobility. Additionally, a higher carrier concentration at lower x suppresses bipolar conduction, thereby reducing thermal conductivity at elevated temperatures. Consequently, the highest zT of ~ 0.5 is observed at 450 K for x = 0.1 and, according to the single parabolic band model, it could be further improved by ~70 % through carrier concentration tuning.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.3 no.2
• /
• pp.107-119
• /
• 2001

Compared on dye, pigment is not colored to textiles, fixed by binders, so it has been used for less expensive textiles. However, the function of a binder hs been improved s organic chemical industry develops, and the flexibility and softness of textiles hs gotten better. Some of dye printing is being replace by pigment printing. Pigment printing skills illuminated and make colors represented cleariy. Since their durabillty is reasonably good and washing processes are not needed, further development of these printing skills are predictable. This study suggests color samples though theoretical researches and experiments on pigment printing that causes less pollution and en be colored on any type of textiles. Especially, over printing can be used in industrial fields because it saves processing and expense. For the improvement of pigment printing skills, more improved studies on binders are expected.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.11.1-11.1
• /
• 2009

Bulk-heterojunction type organic photovoltaic cells have been remarkably improved due to the development of efficient donors and post treatment process. However, most of researchers have studied on the OPVs using spin-coating method during the past decade. To commercialize the OPVs, much cheaper printing process should be developed such as inkjet, screen, gravure, and so on. In this study, we have focused on the development of printing technology using Inkjet and Aerosol-Jet printing, which can offer reliable device performance. Finally, 4.5% power conversion efficiency can be achieved under AM 1.5 1sun light illumination, which is the highest value in printed OPVs. We reveal that substantial improvement can be realized by highly efficient bulk heterojunction after printing. Also, we can confirm these two printing methods are promising fabrication methods for large area OPVs. Also, flexible and large area (18 cm2) printed OPVs have been fabricated and device performance will be discussed in detail.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.4
• /
• pp.43-48
• /
• 2012

The screen printing method is much used in the flat panel display field including the LCD, PDP, FED, organic EL, and etc. for forming the high precision micro-pattern. Also A number of studies of screen printing method has been conducted as the method for the cost down through the improvement of productivity. Because of being the dot printing method of the cylindrical shape not being the line printing method like the existing PDP barrier rib and phosphor, the pillar arrays using the screen printing method is deposited in the hemispherical type not being cylindrical shape in the existing printing process conditions. In this paper, the parameters were set on the screen printing device in order to deposit the cross-sectional shape with the cone or trapezoid shape of the pillar in depositing the pillars used the screen printing device for vacuum glazing. The cross-sectional shape slope of the pillar according to the parameters was measured. And analysis the effect of the screen printing process conditions on the cross-sectional shape slope of pillars based upon the result of being measured. The processing conditions were drawn to minimize the cross-sectional shape slope of pillar.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.381-385
• /
• 2016

Recently, white LEDs, especially, warm white LEDs have been intensively investigated due to outstanding optical properties, long term stability and low power consumption. In this study, mixed type and patterned type of remote phosphors were prepared by screen printing process employing green and red phosphor. Each type of remote phosphor exhibited distinctive photoluminescence spectrum. For example, the mixed type of remote phosphor exhibited unique spectrum, while the patterned type showed expectable spectrum depending on the concentration of phosphors. This indicates that a small amount of red phosphor dramatically reduced the green photoluminescence in the case of mixed-type remote phosphor, whereas the effect was negligible in the patterned-type remote phosphor. The possibility of undesirable chemical reaction was further investigated by using scanning electron microscopy and X-ray diffraction.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.775-777
• /
• 2003

Several methods are available for the fabrication of electrode pattern for the plasma display panel(PDP) including screen printing and photolithographic method. Piezo type ink-jet printing method is considered to the method of choice for electrode patterning in manufacturing of PDP. Both silver ink and absorbent layer paste formulation were developed for ink-jet printing of electrode pattern. The ink-jet printing of silver electrode with preformed absorbent layer was especially suitable for the patterning of address electrode for high resolution PDP.

• The Journal of the Korean dental association
• /
• v.58 no.7
• /
• pp.448-459
• /
• 2020

In addition to extensive research on polymer and metal three-dimensional (3D) printing, ceramic 3D printing has recently been highlighted in various fields. The biggest advantage of 3D printing has the ability to easily create any complex shape. This review introduces the 3D printing technology of ceramics according to the type of material and deals with the latest related research in the industrial field including the biomedical engineering field. Finally, the future of ceramic 3D printing technology available in dentistry will be discussed.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.31 no.1
• /
• pp.1-14
• /
• 2013

Screen printing is a printing method with flexible plate surface characteristics. In addition, since the appearance of electronics industry the screen printing has been demanding high quality and definition. However, Screen printing is a method for taking ink through mesh opening because screen mesh tends to restrict quality of screen printing. In particular, the biggest problem compared with other printing type is halftone reproduction characteristics. Halftone reproduction characteristics for screen printing depend on screen mesh and opening. Dot losses or dot gains are observed through various types of screen mesh because thread of screen mesh interfere with the movement of the ink. Excessive dot losses or gains can affect the tonal range. Furthermore, this problem can result in other problem such as bad contrast and gray balance. Therefore, it is an important factor to use proper screen mesh for halftone screen printing. However, domestic screen printing industry relies on worker's experience in field rather than depending on objective data although standardized specifications and optimal printing conditions are required for screen printing. For this reason, it is important to stipulate standard condition for domestic screen printing industry. Therefore, it was examined to find tonal range by mesh opening in halftone prints process of screen printing used domestic paper and ink in this study. In addition, TVI(Tone Value Increase) characteristic was observed by comparing to the manuscripts and prints of the dot area ratio. Furthermore, contrast value and gray balance were confirmed for each condition of the printout. Conditions for the proper selection of screen mesh screen for the quality of the prints were also examined, compared with the international standard of screen printing, ISO 12647-5.

• Design & Manufacturing
• /
• v.16 no.3
• /
• pp.58-65
• /
• 2022

Micro-fluidic chip has been fabricated by lithography process on silicon or glass wafer, casting using PDMS, injection molding of thermoplastics or 3D printing, etc. Among these processes, 3D printing can fabricate micro-fluidic chip directly from the design without master or template for fluidic channel fabricated previously. Due to this direct printing, 3D printing provides very fast and economical method for prototyping micro-fluidic chip comparing to conventional fabrication process such as lithography, PDMS casting or injection molding. Although 3D printing is now used more extensively due to this fast and cheap process done automatically by single printing machine, there are some issues on accuracy or surface characteristics, etc. The accuracy of the shape and size of the micro-channel is limited by the resolution of the printing and printing direction or layering direction in case of SLM type of 3D printing using UV curable resin. In this study, the printing direction and thickness of each printing layer are investigated to see the effect on the size, shape and surface of the micro-channel. A set of micro-channels with different size was designed and arrayed orthogonal. Micro-fluidic chips are 3D printed in different directions to the micro-channel, orthogonal, parallel, or skewed. The shape of the cross-section of the micro-channel and the surface of the micro-channel are photographed using optical microscopy. From a series of experiments, an optimal printing direction and process conditions are investigated for 3D printing of micro-fluidic chip.