• 대한기계학회논문집B
• /
• 제31권2호
• /
• pp.141-150
• /
• 2007

This paper presents a lumped model to predict crosstalk characteristics of thermally driven inkjet print heads. Using the lumped R-C model, heating characteristics of the head are predicted to be in agreement with IR temperature measurements. The inter-channel crosstalk is simulated using the lumped R-L network. The values of viscous flow resistance, R and flow inertance, L of connecting channels are adjusted to accord with the 3-D numerical simulation results of three adjacent jets. The crosstalk behaviors of a back shooter head as well as a top shooter head have been investigated. Predictions of the proposed lumped model on the meniscus oscillations are consistent with numerical simulation results. Comparison of the lumped model with experimental results identifies that abnormal two-drop ejection phenomena are related to the increased meniscus oscillations because of the more severe crosstalk effects at higher printing speeds. The degree of crosstalk has been quantified using cross-correlations between neighboring channels and a critical channel dimension for acceptable crosstalk has been proposed and validated with the numerical simulations. Our model can be used as a design tool for a better design of thermal inkjet print heads to minimize crosstalk effects.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제39권
• /
• pp.33.1-33.10
• /
• 2017

Dental implants are a common treatment for the loss of teeth. This paper summarizes current knowledge on implant surfaces, immediate loading versus conventional loading, short implants, sinus lifting, and custom implants using three-dimensional printing. Most of the implant surface modifications showed good osseointegration results. Regarding biomolecular coatings, which have been recently developed and studied, good results were observed in animal experiments. Immediate loading had similar clinical outcomes compared to conventional loading and can be used as a successful treatment because it has the advantage of reducing treatment times and providing early function and aesthetics. Short implants showed similar clinical outcomes compared to standard implants. A variety of sinus augmentation techniques, grafting materials, and alternative techniques, such as tilted implants, zygomatic implants, and short implants, can be used. With the development of new technologies in three-dimension and computer-aided design/computer-aided manufacturing (CAD/CAM) customized implants can be used as an alternative to conventional implant designs. However, there are limitations due to the lack of long-term studies or clinical studies. A long-term clinical trial and a more predictive study are needed.

• 한국CDE학회논문집
• /
• 제22권2호
• /
• pp.202-214
• /
• 2017

The augmented visualization of analysis results can play an import role as a post-processing tool for the modeling & simulation (M&S) technology. In particular, it is essential to develop such an M&S tool which can run on various multi-devices. This paper presents an augmented reality (AR) approach to visualizing and interacting with M&S post-processing results through mobile devices. The proposed approach imports M&S data, extracts analysis information, and converts the extracted information into the one used for AR-based visualization. Finally, the result can be displayed on the mobile device through an AR marker tracking and a shader-based realistic rendering. In particular, the proposed method can superimpose AR-based realistic scenes onto physical objects such as 3D printing-based physical prototypes in a seamless manner, which can provide more immersive visualization and natural interaction of M&S results than conventional VR or AR-based approaches. A user study has been performed to analyze the qualitative usability. Implementation results will also be given to show the advantage and effectiveness of the proposed approach.

• 복식문화연구
• /
• 제19권4호
• /
• pp.661-673
• /
• 2011

This study aimed to identify the intrinsic characteristics of camouflage patterns by reviewing their origin, transitions and types from a theoretical background and analyzing their forms of expression in contemporary fashion. For a literature review and an empirical analysis of the camouflage patterns used in contemporary fashion, the study referred to domestic and foreign fashion magazines published between 2000 S/S and 2010 S/S, including Gap Press, Fashion News, Vogue and Harper's Bazaar, and other related data available on the internet. The findings of this study show that the forms of camouflage patterns used in contemporary fashion can be divided into four types: abstract patterns, plant patterns of flowers or leaves, animal patterns and dotted patterns. In terms of coloration, the camouflage patterns work to refresh the design, breaking from the image of military uniforms through the use of a wide range of color variation and combinations as well as the traditional camouflage colors based on khaki and beige. In terms of expression, most of them utilize printing. However, other techniques of expression, such as embroidery, beading, knitting, and collages are used to emphasize the beauty of handcrafted decorations along with the aesthetic value of reliefs. Through these tendencies of expression, the characteristics of contemporary fashion using camouflage are explained with an emphasis on feminine beauty, the expression of neutrality, and the use as decorative factors.

• 한국정밀공학회지
• /
• 제31권3호
• /
• pp.277-283
• /
• 2014

This paper presents the design, optimization and fabrication of a piezo driven micro-positioning stage constructed using a 3D-printer. 3D printing technology provides many advantageous aspects in comparison to traditional manufacturing techniques allowing more rapid prototyping freedom in design, etc. Micro-positioning stages have traditionally been made using metal materials namely aluminum. This paper investigates the possibility of fabricating stages using ABS material with a 3D printer. CAE simulations show that equivalent motion amplification can be achieved compared to a traditional aluminum fabricated stage while the maximum stress is 30 times less. This leads to the possibility of stages with higher magnification factors and less load on the driving piezo element. Experiment results agree with the simulation results. A micro-position stage was fabricated using a 3D printer with ABS material. The motion amplification is very linear and 50 nm stepping was demonstrated.

• 한국컴퓨터정보학회지
• /
• 제2권1호
• /
• pp.45-54
• /
• 1995

본 연구는 ASCII 코드중에서 잘 쓰이지 않는 코드를 반달점(ˇ)으로 할당, 글꼴을 제작하여, 사용자가 국어 로마자 표기법 기본원칙을 모르더라도 한글단어, 문장, 문서를 문자열(string)로 입력받아 알고리즘화된 음운법칙을 적용하여 소리글자로 자동 변환 후 현행 정부 표준안인 국어 로마자 표기법 테이블에서 대응 글자를 참조하여 기계화 코드 변환이 가능토록 설계하였으며, 예외어 처리, 화면색상 및 풀다운 팝업 메뉴 방식을 지원, 마우스 활용 방식을 채택, 사용자 편리성을 제공하였으며, 다양한 서체, 글꼴 확대 및 축소, 이단ㆍ혼합 인쇄기능 등을 고려 C언어를 이용하여 구현하였다.

• 한국식품저장유통학회지
• /
• 제11권1호
• /
• pp.12-16
• /
• 2004

본 연구는 우리나라 대표적인 전통식품중의 하나인 유과를 미국 현지인들에게 수출하고자 포장, 디자인 등을 개선하여 미국인 262명에게 2002년 8-9월 중 기호도 조사를 실시한 것으로써 조사대상자의 성별분포는 남자 45.8％, 여자 54.2％, 연령분포는 10대 41.6％, 20대 58.4％, 인종분포는 백인이 84.0％, 흑인은 8.8％, 히스페닉인은 7.1％이었다. 유과의 포장상태는 전체 응답자중 82.7％는 만족하였으며 포장디자인은 22.0％가 매우 만족하고 54.4％가 만족하는 것으로 나타났으며 인쇄는 69.7％ 이상이 만족한 것으로 나타났다. 그러나 조직감은 48.5％로 만족정도가 다른 항목에 비해 낮았지만 맛과 함께 평가된 향미의 항목에서는 만족도가 60.9％로 상승하였음을 알 수 있었으며 유과에 대한 전반전인 기호도는 92.7％로 응답자 대부분의 기호에 적합하다고 답하였다.

• Current Photovoltaic Research
• /
• 제9권4호
• /
• pp.123-127
• /
• 2021

This study was on electrode design for the realization of a solar cell that combines electrode formation and module integration process to overcome printing limitations. We used the passivated emitter rear contact (PERC) solar cell. Wafer size was 156.75 mm ×156.75 mm. The fabricated cell results showed that the open-circuit voltage of 649 mV, short-circuit current density of 36.15 mA/cm², fill factor of 68.5%, and efficiency of 16.06% with electrode conditions the 24BBs with the width 190 ㎛ and 90FBs with the width 45 ㎛. For improving efficiency, the characteristics of the solar cell were checked according to the change in the number of BBs and FBs and the change in line fine width. It is confirmed that the efficiency of the solar cell will be improved by increasing the number of FBs from 90 to 120, and increasing the line width of the FBs by about 10 ㎛ compared to the manufacturing solar cells.

• 한국해양공학회지
• /
• 제34권4호
• /
• pp.263-271
• /
• 2020

In this study, we performed a three-dimensional (3D) topology optimization of a fixed offshore structure to enhance its structural stiffness. The proposed topology optimization is based on the solid isotropic material with penalization (SIMP) method, where a volume constraint is applied to utilize an equivalent amount of material as that used for the rule-based scantling design. To investigate the effects of the main legs of the fixed offshore structure on its structural stiffness, the leg region is selectively considered in the design domain of the topology optimization problem. The obtained optimal designs and the rule-based scantling design of the structure are manufactured by 3D metal printing technology to experimentally validate the topology optimization. The behaviors under compressive loading of the obtained optimal designs are compared with those of the rule-based scantling design using a universal testing machine (UTM). Based on the structural experiments, we concluded that by employing the topology optimization method, the structural stiffness of the structure was enhanced compared to that of the rule-based scantling design for an equal amount of the fabrication material. Furthermore, by effectively combining the topology optimization and rule-based scantling methods, we succeeded in enhancing the structural stiffness and improving the breaking load of the fixed offshore structure.

• 복식문화연구
• /
• 제25권6호
• /
• pp.741-756
• /
• 2017

The natural resources of Jeju are recognized as the new regional image of that clean island. Reflecting these trends, this study is initiated to develop a textile design with the motive of persimmon, a natural resource of Jeju, and to apply it to infant's and children's clothes. Its purpose is to highlight the image of persimmon, a traditional dye, as a regional signature for Jeju. Product development procedure included, understanding the use of persimmon for fashion products, analyzing Infants' and Children's designer collections over the last three seasons (focused on 2014S/S, 2015S/S, and 2016S/S), and surveying the Children's Clothes market for persimmon dyeing in Jeju. The conclusion was that, the natural resources of Jeju are highly valuable, and should be applied to textile design and apparel products for children. Utilizing Jeju persimmon was actively studied, but, the market for the Jeju persimmon natural - dyeing products is extremely limited. Moreover, the apparel products for infants and children represent old-fashioned styles, despite their higher prices. Therefore, using the formative characteristics of persimmon for each theme was suggested for development of patterns for textile design. Pattern designs were expressed using textured textile screen-printing, embroidery and $appliqu{\acute{e}}$ for infants' and children's clothes. In this study, a total of 10 items were prepared as apparel products for infants and children. All items were designed considering mix-and-match, potential, with each other or with regular mass-market products. These results are expected to contribute to highlighting the unique image of Jeju and to help promote fashion culture products.