• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.159-168
• /
• 2002

In this paper, a study on the design of the transmitter-receiver of fuze sensor for discriminating target position is presented. We propose the algorithm for detecting target distance/direction through investigating the operational concept and principle of fuze sensor. Based on the algorithm, We design transmitter-receiver, calculate various design variables and estimate the performance of that one. The estimated result shows that the required performance of fuze sensor is satisfied. Further research on confirming the performance of proposed algorithm through encounter simulation test with real target and resolving problem will be continued.

• Communications of the Korean Mathematical Society
• /
• v.34 no.3
• /
• pp.1005-1014
• /
• 2019

A new simple method is proposed for reconstructing phylogenetic trees, which we call the spectral method. The most common distance based method is the neighbor-joining method which is based on the minimum evolution principle. The spectral method shows similar performance to the neighbor-joining method for simulated data generated by seq-gen. For real data, the spectral method shows much better performance than the neighbor-joining method. Hence it can be a complementary method for reconstructing phylogenetic trees.

• Journal of Korea Trade
• /
• v.24 no.7
• /
• pp.73-92
• /
• 2020

Purpose - The letter of credit has been playing a major role to diminish overall risks which exist among concerned parties even though there are differences such as language, culture, law, and distance. This paper reviews essence of the letter of credit and its transaction principles, as well as overall practical questions based on the L/C transaction principle. It also investigates the risk of fraud occurrences in L/C transactions and the importance of fraud prevention and preventive measures in international L/C transactions, including the Fraud Rule, which is a major topic to consider in business transactions. Design/methodology - It is considered that an importing country's concerned parties and an exporting country's concerned parties face different situations. This study employs the existing framework to identify liability, responsibility, and obligation for all concerned parties across countries. Using a quite direct measurement of principles in the letter of credit, such as principle of independence, principle of abstraction, and principle of strictness and coincidence, we studied these differences. Findings - Our main findings can be summarized as follow. The paper enhances the efficiency of the L/C payment method to provide fraud generated from L/C transactions, presentation of a theoretical framework about fraud and fraud prevention, which international trading companies should acknowledge in a material way based on fraud risk resulting from taking advantage of L/C transaction principles. Originality/value - Existing studies focus on fraud accidents in L/C transactions by taking bad advantage of the characteristics of the letter of credit without suggesting risks of fraud. This paper attempts to evaluate and provide preventive measures as a solution for fraud and risky international business in a letter of credit transaction. This area of trade studies is underexplored, both empirically and theoretically, although the issue has long been important to Korean and world community foreign trade.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.15 no.3
• /
• pp.3053-3058
• /
• 1973

1. This study was conducted to examine the effects of change of the short range nozzle hole on the travelling distance. The results of this study are summarized as follows; a) Effect of change of the cap hole diameter on the travelling distance of sprayed particles was generally a linear, the increasing rate was about 0.27. b) When the difference between the sectional area of cap hole and that of grooves of swirl plate, was small the travelling distance was decreased by the decreasing of spraying speed at cap hole. 2. This study was conducted to examine the effects of change of the short range nozzle hole on the size of spraying particles. The results of this study are summarized as follows; a) The diameter of sprayed particles on travelling distances in the short range nozzle did not coincide with the kinetic energy principle derived from the momentum and the resistance. b) The average diameter of sprayed particle between 1m and 3m in which amount of sprayed particle was particularly a great deal, was big, because that some of sprayed particles were absorbed each other on the way to fall c) Effect of increase of cap hole diameter was generally enlarged the average diameter of sprayed particle with small rate.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.18-21
• /
• 1999

In this study in order to make doubly-curved sheet metal effectively a sheet metal forming process has been developed by adopting the flexibility of the incremental forming process and the principle of bending deformation which causes slight deformation to thickness The developed process is an unconstrained forming process with no holder. For this study the experimental equipment is set up with the punch-set which consists of two pairs of lower support-punches and one upper center-punch. In the experiments using aluminum sheet it is found that the curvature of the formed sheet metal is determined by controlling the distance between supporting punches in pairs and the forming depth of the center-punch. and the edge-forming method is proposed for forming the sheet metal into the balanced shape. The equation using process variables such as the distance between supporting punches in pairs and the forming depth of the center-punch is proposed for the prediction of the radii of curvatures of the formed shape and it is corrected by the experimental results and the FEM simulation results about whether springback takes place. It is found that according o the simulation there is a certain set of the distance between a pair of supporting punches and the forming depth of the center-punch which causes a little springback. It is thus shown that the radii of curvatures of the formed sheet metal can be predicated by the corrected equation unless significant springback occurs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5208-5213
• /
• 2011

In this paper, we proposed a new direction finding(DF) technology using TDOA(time-difference of arrival) and PDOA(phase difference of arriving signal) method. The proposed technology has a good DF accuracy without DF ambiguity. TDOA or PDOA technology is used to the most of intelligence systems in 21 century. The principle of TDOA is to receive a signal with two parallel antennas, measure the time difference of arrival signal, and converse the time difference to the direction of incident signal. Those technology make a DF system small size but the DF accuracy is low into short antenna installation distance. The principle of PDOA is similar to TDOA except measuring the phase difference of arrival signal, These technology get a good DF accuracy in short antenna installation distance but have a DF ambiguity. The proposed DF method is simulated into DF system operation environment with noise, and has a good DF accuracy.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.4
• /
• pp.41-48
• /
• 2022

This study is a study that designed in-building antennas with improved orientation to improve 5G quality in buildings as 5G is stabilized and more and more traffic is expected to occur in buildings. Instead of applying the forward arrangement of antenna elements, which is the Yagi antenna propagation orientation principle, the antenna design method of vertical arrangement applied to the base station antenna was proposed, and it was confirmed through experiments that antenna orientation increased. According to the experimental results, the directivity did not increase significantly within 10m of the separation distance from the antenna, but the directivity increased by about 3dB at the distance separated by more than 10m. Considering that the wireless environment in the building has various variables such as structure of internal structure, materials such as concrete and glass, closed space, and walls, it is expected that antenna with improved orientation can expand the scope of 5G quality improvement and maintain stable communication service in the building.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.3
• /
• pp.86-92
• /
• 2001

Position controls are very important in semiconductor manufacturing devices, machine tools, precision measuring instruments, etc. to measure the distance of movement of moving objects in minute units and the accuracy of measurement for the moving distance in these devices affect the performance of the whole devices. Therefore, in those precision instruments, a sensing device that can measure the distance of movement with high-precision resolution is required. Thus an optical encoder that has such advantages as easy digital interface, economical price, and a resolution similar to that of laser interferometers can be used. In this paper, a interferometer-type linear scale with easy digital interface and high-resolution has been set up and measured the distance of movement based on the diffraction principle. Interference signals produced in this optical setup of the linear scale have beers digitalized through fabricated photodetectors and designed signal processing circuits. A resolution of 0.5${\mu}{\textrm}{m}$ is acquired from the experimental interferometer-type linear scale without for the movement of scales any additional dividing circuits. It is shown that from this experiment a high-resolution distance measurement device can be designed by a simple optical setup.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.2
• /
• pp.141-150
• /
• 2001

Within a context of rapid technological change and shifting market conditions, the education environment requires new paradigm of education delivery. In accordance of such a technological progress, distance education system, which makes the learning take place at anytime anywhere, overcoming barriers of time, or distance, is emerging as a mainstream of education delivery replacing the convectional one way delivery system from instructor to learners. This paper aims to introduce the development principle and algorithm about Instructional System Desgin(ISD) module, a part of a total solution for distance education services. It was developed on Linux, a free Unix-type operating system. Linux supports so various network protocols, sharing the network resources in a smooth way, that it is able to integrate with other operating system very easily, especially with Windows NT or Windows 2000 servers. In terms of quality, it never falls behind the windows products which are commercially available only. It is a right operating system for the such a school environment that is usually limited in budgets. The development environment of the distance education solution to which ISD module belongs is composing of Apache server for web server, lava bean based on components for ISD module, PHP, server-side scripting language, for HTML documents and MySQL for DBMS.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.5
• /
• pp.122-128
• /
• 2010

This paper presents the characteristics for ground impedance of combined three rods according to distance of current probe and frequency using the fall-of-potential method and the testing techniques to minimize the measuring errors are proposed. The fall-of-potential method is theoretically based on the potential and current measuring principle and the measuring error is primarily caused by the position of auxiliary probes. In order to analyze the effects of ground impedance due to the distance of the current probe and frequency, ground impedances were measured in case that the distance of current probe was located from 5[m] to 20[m] and the measuring frequency was ranged in 55~513[Hz]. The results could be help to determine the position of current probe and the measuring frequency when the ground impedance was measured at grounding system.