• Ocean and Polar Research
• /
• v.38 no.3
• /
• pp.195-207
• /
• 2016

Because the high latitude region in the North Pacific is characterized by high primary production in the surface water enriched with nutrients, it is important to understand the variation of surface water productivity and associated nutrient variability in terms of global carbon cycle. Surface water productivity change or its related nutrient utilization rate during the Northern Hemisphere Glaciation (NHG; ca. 2.73 Ma) has been reported, but little is known about such circumstances under gradual climate cooling since the NHG. Bulk nitrogen isotope (${\delta}^{15}N_{bulk}$) of sedimentary organic matter has been used for the reconstruction of nutrient utilization rate in the surface water. However, sedimentary organic matter experiences diagenesis incessantly during sinking through the water column and after burial within the sediments. Thus, in this study we examine the degree of nitrate utilization rate during the early Pleistocene (2.4-1.25 Ma) since the NHG, using the diatom-bound nitrogen isotope (${\delta}^{15}N_{db}$), which is known to be little influenced by diagenesis, from Site U1343 in the Bering slope area. ${\delta}^{15}N_{db}$ values range from ~0.5 to 5.5‰, which is lower than ${\delta}^{15}N_{bulk}$ values, but they vary with larger amplitude. Variation patterns between ${\delta}^{15}N_{db}$ values and biogenic opal concentration are generally consistent, which indicates that the nitrate utilization rate is closely related to opal productivity change in the surface water. A positive correlation between opal productivity and nitrate utilization rate was observed, which is different from the other high latitude regions in the North Pacific. The main reason for this contrasting relationship is that the primary production in the surface water at Site U1343 is influenced mostly by the degree of sea ice formation. Still, although concerns about diagenetic alteration have been avoided by using ${\delta}^{15}N_{db}$, the effects of the preservation state of biogenic opal and the species-dependent isotopic fractionation on ${\delta}^{15}N_{db}$ should be assessed in the future studies.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.326-336
• /
• 2020

This study was conducted to investigate productivity of strawberry plants as affected by propagation method and cultivation system. Transplants propagated by cutting propagation and pinning propagation were planted and grown for a whole production period in soil and hydroponic cultivation systems. Growth parameters, fruit productivity, and fruit quality were measured during the whole harvest period. The results showed that propagation method and cultivation system had significant effects on vegetative growth of strawberry plants. Total fruit yield per plant and average fruit weight per fruit during the whole harvest period were significantly lower in the plants grown in soil cultivation system. Total unmarketable fruit ratio was significantly greater in soil cultivation system than that in hydroponic cultivation system. Small fruits were the primary unmarketable fruits in soil cultivation system, while malformed fruits were the primary unmarketable fruits in hydroponic cultivation system. The overall high quality of fruit was found in February, and the plants cultivated in hydroponic cultivation system had higher quality of fruit as compared with that in soil cultivation system. It is concluded that cutting propagation is better than pinning propagation, and hydroponic cultivation system is better than soil cultivation system for fruit productivity of strawberry.

• Fisheries and Aquatic Sciences
• /
• v.21 no.4
• /
• pp.9.1-9.7
• /
• 2018

To establish a comprehensive management strategy, as part of the optimization of cultural practice for an oyster rack culture system, we used a numerical model to estimate the primary production in the waters on the eastern coast of Wando island, South Korea. The estimated primary production ranged from 17.12 to $1052.55mgC\;m^{-2}day^{-1}$ ($204.22{\pm}224.75mgC\;m^{-2}day^{-1}$ in average). Except for the times of peak phytoplankton blooms, the estimated primary production (PP) was consistently under $200mgC\;m^{-2}day^{-1}$, which is more similar to the value of PP measured off the western coast of South Korea than the southern coast. No clear relationship was observed between nitrogen content and rainfall with the exception of heavy rainfall events, indicating that precipitation might not be the main source of nutrients in these waters. No clear influence was observed from Doam tidal discharge, located 24 km north from these waters due to main tide comes in this area from the channel between Gunwe-myeon in Wando island and Pukpyeong-myeon in Haenam-gun. Because of the shallow water depth and strong tidal current, resuspension of sediments, which causes an input of nitrogen into the system, could be easily caused by even mild wind and the infrequent passing of ships. Microscopic examination of the phytoplankton composition showed additional contribution of benthic species such as Paralia sulcata into the waters, which increase the productivity of oyster farms in the waters. The availability of nitrate and phosphate for primary production was temporarily limited throughout most of the spring and autumn blooming season.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.330-335
• /
• 2002

Resistance spot welding is one of the most widely used processes in sheet metal fabrication. Quality assurance of welding has been important to increase the productivity. In this study, weld quality estimation using primary circuit dynamic resistance applied to the in-process real-time systems. For quality estimation, factors relating to quality were extracted from the dynamic resistance, measured in the timer. The relationship between these factors and weld quality was determined through a artificial neural network model. This method has the advantage over the conventional one, such as obtaining the quality information without the use of extra devices.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2005.09a
• /
• pp.37-40
• /
• 2005

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2005.09a
• /
• pp.19-20
• /
• 2005

• International Commerce and Information Review
• /
• v.9 no.3
• /
• pp.131-149
• /
• 2007

E-tade has the potential to accelerate existing trends and introduce new ways of conducting traditional trade. The primary purpose of this research is to investigate performance factor and analyzes influence between performance of e-Trade and implementation of company. This research will be used as a basis for examining the actual results of e-Trade usage and export productivity. In order to facilitate the process, analysis began after a research prototype was created and research thesis established.

• Journal of KIBIM
• /
• v.5 no.3
• /
• pp.19-32
• /
• 2015

For decades, the productivity issue has been a primary concern for the all stake-holders who participate in domestic construction industry. Especially, between a whole life cycle of building, the construction phase's productivity problem makes or break the entire project. In this respect, the general construction company, who accept the order and construct the building(so called General Contractor), should consider various strategies, such as schedule management, cost management, quality management, inner-crew management, etc., for the productivity improvement., and almost of these management methods have been studied for a long time. But, the researches and studies about the specialty contractor, who construct the building directly in construction site were not sufficiently complete yet. This research begins as an idea which tries to apply the BIM(Building Information Modeling) into the tasks of Specialty contractors for their productivity improvement. And for the effective application of construction BIM to specialty contractors, establish of the BIM project execution plan for them, not the fragmentary adoption of BIM. Therefore, in this paper, we develop the BIM project execution plan for the reinforced concrete companies who conduct the framework construction which located on CP(Critical Path) Especially, we model the "Construction BIM Use List for the RC Work", "BIM Application Master Process" and "BIM Application Detailed Process", and general contractor who use these BIM uses list and process models can manage various specialty contractors about schedule, cost, earned value, quality, safety and environment management systematically.

• Journal of Korean Society for Quality Management
• /
• v.48 no.1
• /
• pp.51-68
• /
• 2020

Purpose: The primary objective of this research is to develop the optimal operating conditions as well as their associated design spaces for a Cryogenic Submerged Arc Welding(SAW) process by improving its quality and productivity simultaneously. Methods: In order to investigate functional relationships among quality characteristics and their associated control factors of an SAW process, a stepwise design of experiment(DoE) method is proposed in this paper. Based on the DoE results, not only a multi-dimensional design space but also a safe operating space and normal acceptable range(NAR) by integrating statistical confidence intervals were demonstrated. In addition, the optimal operating conditions within the proposed NAR can be obtained by a robust optimal design method. Results: This study provides a customized stepwise DoE method (i.e., a sequential set of DoE such as a factorial design and a central composite design) for Cryogenic SAW process and its statistical analysis results. DoE results can then provide both the main and interaction effects of input control factors and the functional relationships between the input factors and their associated output responses. Maximizing both the product quality with high impact strength and the productivity with minimum processing times simultaneously in a case study, we proposed a design space which can provide both acceptable productivity and quality levels and NARs of input control factors. In order to confirm the optimal factor settings and the proposed NARs, validation experiments were performed. Conclusion: This research may provide significant contributions and applications to many SAW problems by preparing a standardization of the functional relationship between the input factors and their associated output response. Moreover, the proposed design space based on DoE and NAR methods can simultaneously consider a number of quality characteristics including tradeoff between productivity and quality levels.

• ALGAE
• /
• v.37 no.4
• /
• pp.265-279
• /
• 2022

The primary production (PP) by phytoplankton in marine ecosystems is essential for carbon cycling and fueling food webs. Hence, estimating the PP in the territorial sea of each country is a necessary step to achieving carbon neutrality. To estimate the PP in the territorial sea of the Republic of Korea from 2005 to 2021, we analyzed various physiochemical parameters, such as sea surface temperature (SST), Secchi depth, and concentrations of chlorophyll-a and nutrients in the seas of five regions, including the East Sea, West Sea, western South Sea, eastern South Sea, and the waters off Jeju Island. During the 17-year study period, the SST tended to increase, while the nutrient concentrations declined, except in the Jeju area. Overall, the PP did not show a specific temporal trend, but daily PP in the western South Sea was the highest among the five regions. Moreover, the maximum PP in the Korean territorial waters (76,450 km²) was estimated at 11,227 Gg C y^-1, which accounts for 0.03% of the global PP. The results may give insights into a better understanding of the PP, further resource utilization, and environmental sustainability in the studied region.