• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.565-568
• /
• 2008

플라이애쉬는 상대적으로 낮은 초기 강도 발현율에 의해서 고로슬래그 미분말에 비하여 사용이제한적이다. 따라서 플라이애쉬는 우수한 경제성과 많은 발생량에도 불구하고 많은 양이 활용되지 못하고 매립되고 있다.본 연구에서는 자극제가 플라이애쉬를 사용한 콘크리트의 성능에 미치는 영향을 확인하고 플라이애쉬의 활용 증대 가능성을 검토하였다. 연구 결과 자극제를 사용한 플라이애쉬 콘크리트가 동일 슬럼프, 공기량 및 로스를 가지면서 일반적인 혼화제를 사용한 콘크리트보다 압축강도가 높게 나타났으며 다양한 요인에서의 자극제의 성능 발현을 검증할 경우 자극제를 사용한 플라이애쉬 콘크리트의 현장 적용 확대가 가능할 것으로 사료된다.

• 환경생물
• /
• 제20권1호
• /
• pp.35-39
• /
• 2002

The significance of cell ploidy and repair ability for the radioprotective efficiency of cysteamine was studied in DNA repair - proficient and repair - deficient yeast cells irradiated $^{60}C0\;\gamma-rays.$ Results have been obtained for the cell survival of two groups of yeasts-diplont and haplont cells, both in haploid and diploid states. For diploid Saccharomyces cerevisiae yeast cells, the correlation between the radio-protective action of cysteamine and the cell repair capacity was demonstrated. Such a correlation was not clearly expressed for haploid yeast cells. In addition, evidence was obtained indicating that the degree of the radioprotective action was independent of the number of chromosome sets in haplont yeast Pichia guilliermondii cells and in some radiosensitive mutants defective in the diploid-specific recovery. It is concluded on this basis that the radioprotective action may involve the cellular recovery process, which may be mediated by a recombination-like mechanism, for which the diploid state is required. The results obtained clearly show that the radioprotective effect was dependent on DNA repair status and indicate that the mechanism of the radioprotective action may be realized on the level of primary radiation damage production as well as on the level of postradiation recovery from potentially lethal radiation damage.

• The Korean Journal of Ecology
• /
• 제12권4호
• /
• pp.245-256
• /
• 1989

Nitrogen cycling was in vestigated in Piuns koraiensis plantations with different ages, 1, 2, 3, 6, 9 and 11 years, which were reforested after clear-cutting. Annual N input by bulk precipitation was 10kg., and output by runoff decreased as the plantation aged, especially in-N. The standing N content of the whole vegetation increased approximately 5 times through 11 years. Understory surpassed P. koraiensis plants in the distribution of standing N content for the initial 9 years, but reversed thereafter. Annual N uptake of P. koraiensis plants increased greatly through 11 years, but that of understory increased somewhat until 9 years and decreased thereafter. The maximum N uptake of the whole vegetation was made in the 9-yr-old plantation. In the 1-yr-old one, 59% of the maximum was already absorbed by understory which mainly consisted to herbs. The recycling coefficient, ratio of annual return to rptake, of the whole vegetation decreased as the plantation aged and the value of understory was greater than that of P koraiensis plants. On the contrary, the N use efficiency, ratio of the net primary production to N uptake, of the whole vegetation increased as the plantation aged and the value of understory was less than that of P. koraiensis plants. Consequently, it is emphasized that understory played an important role in such plantation reforesred after clear-cutting for the initial 9 years.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.199-203
• /
• 2009

After the construction participants system is abolished, expectations are high for its consequences such as liquidating paper-companies, holding back low price contracts, and improving multi-stepwise subcontract structure. However, the professional construction firms have been took responsibilities and obligations as businessmen employing the chief workmen and construction workers. For this reason, it is expected that they will be charged a great deal of expenses such as increase in labor management services and laborers, the occurrence of an retirement grants, insurance fees, etc. Since the hold on power of field managers are getting weaker toward the construction workers, it is most likely to have loss in efficiency of production in the long term. Therefore purpose of this research is to analyze difficulties and the point at issues with which professional construction firms are undergoing after abolishing the construction participants system by investigating on the actual condition in the field management. For this research, we got a grip on the actual condition and analyzed the rise of a primary factor on reinforced concrete construction.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.175-181
• /
• 2013

The primary element of machining automation is to maximize the utilization of machine tools, which determines the output and lead-time. In particular, 95% of raw materials for wing ribs are cut into chips and 0.6 ton of chips are generated every hour from each machine tool. In order to verify the chip recycling system that controls the chips from the machines in five-axis FMS line, a simulation of the virtual model is constructed using the QUEST simulation program. The optimum speed of the chip conveyor and its operating conditions that directly affect the efficiency of the FMS line are presented including the chip conveyor speed, the maximum capacity of the hopper, and the number of chip compressors.

• Journal of Microbiology and Biotechnology
• /
• 제15권6호
• /
• pp.1304-1309
• /
• 2005

The production of therapeutic proteins for human diseases in plants results in many economic benefits, including reduced risk of animal virus contamination, high yields, and reduced production and storage costs. Human cytokines, interleukin-11 (hlL-11) and granulocyte-macrophage colony-stimulating factor (hGM-CSF), cDNAs were introduced into rice or tobacco, using either the maize ubiquitin promoter or the 35S promoter. The primary hIL-11 transgenic rice plants exhibited stunted growth and a sterile phenotype, whereas the hIL-11 transgenic tobacco plants did not. This suggests that hIL-11 expression in rice disrupts the normal growth and development of the plant. The regeneration efficiency of rice calli transformed with hGM-CSF was found to be approximately a quarter of that seen with the hIL-11, suggesting that hGM-CSF expression is more deleterious to the regeneration of rice calli than is hIL-11. However, the surviving hGM-CSF transgenic rice plants exhibited a normal phenotype of growth. Therefore, it appears that only those transgenic rice lines that expressed the human cytokines in small quantities were able to survive the selection process.

• KSBB Journal
• /
• 제16권6호
• /
• pp.579-591
• /
• 2001

The cell growth inhibitor effect of cervical cancer cells was investigated by liposome mediated transfection (pRcCMVp53/lipofectin) and by transfection using adenovirus (AdCMVp57). The papilloma virus cancer cell lines we used in this study were HPV16 positive, having inhibiter gene, wild p53 gene, CaSki, SiHa, HPV18 positive HeLa, HeLaS3 and HPV negative C33A, HT3. LacZ gene of E.coli was used as the marker gene for the transfection efficiency. The effect on the inhibition of tumor cell growth was measured by cell count and cell viability though ELISA analysis and MTT assay. The inhibition of tumor cell growth was confirmed by measuring each assay for six days, comparing with the normal control cell growth. The cell growth of cervical cancer calls by transfection was significantly reduced and showed tittle differences among the cell lines. To eliminate the potential problem of Ad(adenovirus) contamination during rAAV production, rAAV can be produced by a triple transfection of vector plasmic, packaging plasmid, and adenovirus helper plasmid. To examine the helper functions of Ad plasmids on the production of rAAV vector, we carried out cotransfection of three plasmids, AAV vector, packaging construct, and Ad helper plasmids. The optimized transfection condition for calcium phosphate method is 25ug of total DNA per 10-cm-diameter plate of 293 cell. We found that rAAV yields peaked at 48hr after Ad infection. The titer of rAAV was measured by the dot blot analysis to measure the number of particles/ml based on the quantification of viral DNA. Recent1y, Kombucha(fungi) was identified as a very potent antileukefic agent. In the present study, effect of natural toxin(plankton) and Kombucha is PSP(GTXI-3, neoSTX), on various MTT assay cervical cancer cell line. Toxin(GTX 1-3, neoSTX) also inhibited the proliferation in primary cervical cancer calls in a dose-dependent toxin concentration. These results showed that toxin was very potent in inhibiting the proliferation of cervical cancer calls in vitro. Toxins and Kombuoha exhibited a dose dependent inhibition of cellular proliferation in cancer cell line.

• 에너지공학
• /
• 제25권4호
• /
• pp.85-92
• /
• 2016

초고온가스로는 열출력 밀도가 낮아 노심용융의 가능성이 낮으며, 냉각재 상실사고 시 수소 발생 등으로 인한 폭발의 위험도 없다. 안전성 측면의 장점과 더불어 냉각재를 초고온으로 만들어 전력생산이외에 산업시설용 공정열로의 응용도 가능하다. 본 논문에서는 초고온가스로를 일차계통으로 하고, 전력 및 공정열 공급이 가능한 이차계통의 개념 설계를 담고 있다. 기존에 NGNP(Next Generation Nuclear Part)에서 제안한 350 MW 열출력 원자로 모델을 기반으로 수소생산 루프와는 별도로 전력생산을 위한 300 MW의 열에너지를 중간열교환기를 통해 이차계통으로 전달하는 참조모델을 개발하고, 이를 열역학적 측면에서 분석하였으며 이차계통 각 지점에서 주요 설계변수에 따른 효율분석과 최적화개념 연구를 수행하였다.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.46-59
• /
• 1998

This paper presents shape design, surface construction, and cutting path generation for the surface of marine ship propeller blades. A propeller blade should be designed to satisfy performance constraints that include operational speed which impacts rotations per minutes, stresses related to deliverable horst power, and the major length of the marine ship which impacts the blade size and shape characteristics. Primary decision variables that affect efficiency in the design of a marine ship propeller blade are the blade diameter and the expanded area ratio. The blade design resulting from these performance constraints typically consists of sculptured surfaces requiring four or five axis contoured machining. In this approach a standard blade geometry description consisting of blade sections with offset nominal points recorded in an offset table is used. From this table the composite Bezier surface geometry of the blade is created. The control vertices of the Hazier surface patches are determined using a chord length fitting procedure from tile offset table data. Cutter contact points and path intervals are calculated to minimize travel distance and production time while maintaining a cusp height within tolerance limits. Long path intervals typically generate short tool paths at the expense of increased however cusp height. Likewise, a minimal tool path results in a shorter production time. Cutting errors including gouging and under-cut, which are common errors in machining sculptured surfaces, are also identified for both convex and concave surfaces. Propeller blade geometry is conducive to gouging. The result is a minimal error free cutting path for machining propeller blades for marine ships.

• 한국해양환경ㆍ에너지학회지
• /
• 제20권2호
• /
• pp.100-106
• /
• 2017

인공용승구조물은 저층에 인공적으로 해중산(Sea Mount)을 설치하여, 저층수가 상층의 유광층(Euphotic Zone)으로 용승되도록 하는 구조물로 저층수에 포함된 풍부한 영양염의 공급은 일차생산을 증가시키고 이에 따른 먹이 연쇄작용 및 어류 군집 유도효과를 기대할 수 있다. 본 연구에서는 인공용승구조물의 재료 및 형태에 따라 달라질 수 있는 공극률의 변화에 따른 흐름특성을 파악하고자 하였다. 그 결과, 공극률이 커질수록 상승유량은 작아졌고, 상승유량이 작아짐에 따라 하강유량도 작아지는 특성을 파악할 수 있었다. 인공용승구조물의 단위면적당 용승유량은 공극률이 10%일 때 가장 좋은 효율을 나타냈으며, 공극률이 20%일 경우에도 불투과성 인공용승구조물에 비해 좋은 효율을 보였다. 따라서 인공용승구조물의 최적단면을 설계할 경우 공극률을 20% 이하로 설계할 때 좋은 효율을 보일 것으로 판단된다.