• 한국의류산업학회지
• /
• 제14권4호
• /
• pp.648-659
• /
• 2012

This research categorizes fundamental data needed to develop eco-friendly fabrics treated with bamboo leaf & pine leaf extracts. The effect of mordant on those fabrics was analyzed through the measurement of mechanical properties and the estimation of primary hand values for cotton and silk fabrics dyed with bamboo leaf and pine leaf extracts that were later treated with various mordants. When cotton was dyed with bamboo leaves and pine leaves extracts, EM, WT, 2HB, 2HG, 2HG5, LC, T, and W increased however, RT, SMD, and RC decreased compared to raw cotton fabric. The B, G, and MIU increased after mordant treatment to the dyed cotton and resulted in a stiffer and rougher cotton's hand. EM, WT, RT, MIU, WC, T, and W increased (in terms of silk); however, LT, B, 2HB, G, 2HG, 2HG5, MMD, SMD, and LC decreased compared to raw silk fabric. Similar to the dyed cotton, mordant treatment increased the MIU and LC of dyed silk subsequently, the hand became stiffer and rougher. A greater tannin adsorption results in an increased mechanical property and the primary hand value. For both fabrics, mordant treatment made its smoothness drop. However, the scale of drop for cotton was significant, while the scale of the drop for silk was minor. In terms of type of mordant, femordant and natural-mordant treatment influenced the tensile, shear, surface properties of fabrics, and primary hand values more than Cu-mordant and synthetic-mordant in addition, this increased the stiffness, hardness, and roughness of fabrics.

• 복식
• /
• 제56권7호
• /
• pp.142-151
• /
• 2006

Bikini, a brief two-piece bathing suit revealing the wearer's navel, was first introduced in Paris, in 1946. However, it was not until the late 1950s that Americans were ready to adopt bikinis. Therefore, I focused on the following research questions to understand the popularization process of bikinis in the United States, from 1946 to the 1960s: 1. Why were Americans initially hesitant to adopt the bikini? 2. What were the factors that influenced the popularization of the bikini among Americans in the late 1950s? Primary sources including Bazaar. Madmoiselle, Vogue, The New York Times, and Life were reviewed. I referred to secondary sources on the history of fashion and American popular culture to interpret primary sources. According to the primary sources, Americans were hesitant to adopt the bikini, partly due to the excessive demand on the wearer's figure. However, the conservative social atmosphere during Cold War would not accept immorality and obscenity which would threaten America's future. Therefore, the campaigns against the sex industry, which developed prominently after WWII, predominated American society during the 1950s. Under this atmosphere, a small number of pictures and articles on bikinis appeared in the primary sources. Bikinis were only found in advertisements including sun lotions and hair removers. However, American society had to accept the change in sexual mores by the end of the 1930s. Body-revealing fashions including miniskirts, hot pants, and see-through material reflected the change in social convention. By the end of the 1950s, the number of pictures and articles on bikinis also began to increase in the primary sources. More Americans adopted bikinis with the increasing number of private pools and European trips. The vogue of sun-tanning and movies featuring bikinis further contributed to their popularity in the late 1930s and into the 1960s.

• 한국산학기술학회논문지
• /
• 제13권2호
• /
• pp.900-905
• /
• 2012

낙후된 도시 주거지 재생의 방안에 대한 논의와 연구가 활발하게 진행되고 있다. 그러나 도시농업을 단순히 주민참여의 수단이나 일차산업으로서의 가치에 대한 논의가 부분적으로 이루어지고 있는 실정이다. 기존의 공간자본가치 극대화의 수단으로 전락한 도시개발의 새로운 극복방안으로 장소자본 가치를 높일 수 있는 대안이 모색되어야 할 시점이다. 따라서 본 연구는 창조적 산업융합개념을 적용한 도시농업의 장소적 가치를 논의함으로써 지속가능한 도시재생의 단초를 이론적 바탕을 제공하는 것이 목적이다. 이를 위하여 기존의 도시개발 방식의 문제점, 산업융합과 도시농업의 의미, 그리고 산업융합형 도시농업의 장소가치에 대한 이론적 연구를 통해 도시재생의 새로운 패러다임을 제시하고 있다.

• 보건의료산업학회지
• /
• 제10권3호
• /
• pp.63-74
• /
• 2016

Objectives : There is a need to develop a data quality management algorithm to improve the quality of healthcare data using a data quality management system. In this study, we developed a data quality control algorithms associated with diseases related to hypertension in patients with diabetes mellitus. Methods : To make a data quality algorithm, we extracted the 2011 and 2012 discharge damage survey data from diabetes mellitus patients. Derived variables were created using the primary diagnosis, diagnostic unit, primary surgery and treatment, minor surgery and treatment items. Results : Significant factors in diabetes mellitus patients with hypertension were sex, age, ischemic heart disease, and diagnostic ultrasound of the heart. Depending on the decision tree results, we found four groups with extreme values for diabetes accompanying hypertension patients. Conclusions : There is a need to check the actual data contained in the Outlier (extreme value) groups to improve the quality of the data.

• 대한환경공학회지
• /
• 제31권6호
• /
• pp.449-453
• /
• 2009

본 연구에서는 사업장에서 발생되는 지정폐기물 중 폐기물관리법상 규제되고 있는 유해물질류 7종의 함량 특성을 조사하였다. Cu, Pb 등과 같이 규제되고 있는 중금속의 배출 가능성이 높은 표본사업장을 선정하여 9개 업종, 90개 사업장에서 슬러지, 폐촉매 등 폐기물 종류별 시료 108건을 채취 분석하였다. 분석방법은 선진국의 분석방법을 토대로 제안한 함량시험방법으로 분석하였고 그 결과는 함량기준으로 관리하고 있는 오스트리아의 규제기준과 비교검토하였다. 그 결과 Cu는 모든 업종에서 비교적 높은 농도로 검출되었으며, 특히 코크스.석유정제품 제조업, 1차 금속산업, 전자부품, 영상, 음향 및 통신장비제조업에서 발생된 오니, 분진, 소각재 등의 폐기물이 오스트리아 기준 100 mg/kg 보다 높은 농도로 나타났다. Pb은 1차 금속산업에서 발생된 분진에서 높은 농도로 검출되었으며 총 크롬의 경우에는 상업분류코드 18, 19, 23 등에서 높은 농도로 나타났다. 또한 Cr(VI)을 분석한 결과, 봉제의복 및 모피 산업에서 발생된 분진에서 높은 농도를 나타나는 것으로 조사되었다.

• 기술혁신학회지
• /
• 제15권2호
• /
• pp.277-298
• /
• 2012

농림수산식품 산업은 기존의 생산 중심의 1차 산업을 탈피하여 미래 신성장동력 산업으로의 도약을 목표로 농업 R&D 패러다임의 전면적인 전환을 도모하고 있으며, 특히 농생명자원을 활용한 생명산업 등의 육성을 주요 과제로 선정하고 범부처 청 차원에서 R&D 지원을 강화하고 있다. 본 연구에서는 생명산업의 핵심자원인 농생명자원의 확보 관리 및 활용 등 전 단계에 걸친 국가 R&D 정책, 기술개발 전략, 사업 추진현황, 성과 등에 대한 실증분석을 통해 문제점을 도출하고 실용화 조기 달성을 위한 개선방안을 제안하고자 한다. 궁극적으로 제안된 개선방안으로부터 농생명자원 R&D 분야의 정부/민간, 부처(청) 내 역할분담 및 협력방안을 제시함으로써, 정부 R&D 투자의 전략성 효율성을 강화하고 적극적인 민간기업의 참여를 통한 생명산업의 산업화 성공사례 조기 달성에 기여할 것으로 기대된다.

• Food Science and Biotechnology
• /
• 제15권5호
• /
• pp.664-671
• /
• 2006

Modeling the growth kinetics of lactic acid bacteria (LAB), one of the most valuable microbial groups in the food industry, has been actively pursued in order to understand, control, and optimize the relevant fermentation processes. Most modeling approaches have focused on the development of single population models. Primary single population models provide fundamental kinetic information on the proliferation of a primary LAB species, the effects of biological factors on cell inhibition, and the metabolic reactions associated with cell growth. Secondary single population models can evaluate the dependence of primary model parameters, such as the maximum specific growth rate of LAB, on the initial external environmental conditions. This review elucidates some of the most important single population models that are conveniently applicable to the LAB fermentation analyses. Also, a well-defined mixed population model is presented as a valuable tool for assessing potential microbial interactions during fermentation with multiple LAB species.

• Nuclear Engineering and Technology
• /
• 제44권3호
• /
• pp.343-354
• /
• 2012

Primary water stress corrosion cracking (PWSCC) is a major safety concern in the nuclear power industry worldwide. PWSCC is known to initiate only in the condition in which sufficiently high tensile stress is applied to alloy 600 tube material or alloy 82/182 weld material in pressurized water reactor operating environments. However, it is still uncertain how much tensile stress is re-quired to generate PWSCC or what causes such high tensile stress. This study was performed to pre-dict the magnitude of weld residual stress and operating stress and compare it with previous experi-mental results for PWSCC initiation. For the study, a pressurizer safety nozzle was selected because it is reported to be vulnerable to PWSCC in overseas plants. The assessment was conducted by nu-merical analysis. Before performing stress analysis for plant conditions, a preliminary mock-up ana-lysis was done. The result of the preliminary analysis was validated by residual stress measurement in the mock-up. After verification of the analysis methodology, an analysis under plant conditions was conducted. The analysis results show that the stress level is not high enough to initiate PWSCC. If a plant is properly welded and operated, PWSCC is not likely to occur in the pressurizer safety nozzle.

• KIEE International Transactions on Power Engineering
• /
• 제5A권2호
• /
• pp.109-115
• /
• 2005

Recently, the needs and concerns regarding power loss have been increasing according to energy conservation at the level of the national policies and the business strategies of power utilities. In particular, the issue of power loss is the main factor for determining rates for electrical consumption in the deregulation of the electrical industry. However, because of the lack of management for power loss load factors (LLF) it is difficult to make a calculation for power loss and to make a decision concerning the electric rates. Furthermore, loss factor (k-factor) in Korea, which is of primary significance in the calculation of distribution power loss, has been used as a fixed value of 0.32 since the fiscal year 1973. Therefore, this study presents the statistical calculation methods of the loss factors classified by load types and seasons by using the practical data of 65 primary feeders that have been selected by appropriate procedures. Based on the above, the algorithms and methods, as well as the optimal method of the distribution loss management classified by facilities such as primary feeders, distribution transformers and secondary feeders is presented. The simulation results demonstrate the effectiveness and usefulness of the proposed methods.

• Nuclear Engineering and Technology
• /
• 제47권7호
• /
• pp.895-906
• /
• 2015

Background: Mitigation of primary water stress corrosion cracking (PWSCC) is a significant issue in the nuclear industry. Advanced nickel-based alloys with lower susceptibility have been adopted, although they do not seem to be entirely immune from PWSCC during normal operation. With regard to structural integrity assessments of the relevant components, an accurate evaluation of crack growth rate (CGR) is important. Methods: For the present study, the extended finite element method was adopted from among diverse meshless methods because of its advantages in arbitrary crack analysis. A user-subroutine based on the strain rate damage model was developed and incorporated into the crack growth evaluation. Results: The proposed method was verified by using the well-known Alloy 600 material with a reference CGR curve. The analyzed CGR curve of the alternative Alloy 690 material was then newly estimated by applying the proven method over a practical range of stress intensity factors. Conclusion: Reliable CGR curves were obtained without complex environmental facilities or a high degree of experimental effort. The proposed method may be used to assess the PWSCC resistance of nuclear components subjected to high residual stresses such as those resulting from dissimilar metal welding parts.