• 대한기계학회논문집A
• /
• 제38권11호
• /
• pp.1245-1256
• /
• 2014

피로균열 진전거동은 내재적, 외재적 요인에 의하여 시간 경과에 따라 많은 변동을 보인다. 감마과정 모델을 포함하여 연속적, 점진적 그리고 단조롭게 진전하는 피로균열 진전거동의 불확실성을 모사하기 위한 열화모델을 고찰하였다. Lu와 Meeker의 피로시험 자료에 감마과정 모델을 적용하여 시간에 따라 확률적으로 변동하는 피로균열 진전거동을 예측하였다. 피로균열 진전에 관한 상태저하와 수명을 시간에 따라 형상이 변화하는 확률분포 곡선으로 표현하였으며 비대칭도와의 관계로부터 기대수명으로 중위수의 적용이 적절함을 확인하였다. 최적 교체주기와 백분위 수명에 관한 고찰로 감마과정 모델이 예방정비을 위한 정책판단 기준으로 활용할 수 있음을 제시하였다.

• 보건행정학회지
• /
• 제27권4호
• /
• pp.284-295
• /
• 2017

Background: The objectives of this study were to identify the reasons of quitting smoking, to determine the factors that make it difficult or helpful to maintain smoking cessation and to confirm the changes after the smoking cessation. Methods: This study was conducted an in-depth interview with people who participated in the smoking cessation treatment program. There were 10 participants and they were interviewed thoroughly for 14 times. Using the directed content analysis, we analyzed the transcript which was written by recording the interview and the researchers' note. Results: The results of this study are summarized as 'the experience while at the verge of smoking cessation and stepping over the verge of smoking cessation,' 'the changing experience due to smoking cessation,' and 'maintaining the changes through overcoming re-smoking.' The smoking cessation treatment program induced the smokers to quit smoking. Participants mentioned drinking alcohol was the major obstacle to maintain smoking cessation. Also, they noted that the money and the time that were already spent to quit smoking helped their smoking cessation as well as the social relations which helped to prevent re-smoking. Participants felt well-cared through the smoking cessation treatment program and that it helped them to maintain smoking cessation. Conclusion: Smoking cessation treatment program has a positive effect on the smoking cessation trial and maintenance. In order for smokers to overcome re-smoking, educations regarding drinking problem, formation of supportive social relationship, and the applications for smoking cessation will be beneficial.

• 한국의사학회지
• /
• 제24권1호
• /
• pp.9-15
• /
• 2011

Recently, the oriental medicine industry in Korea has faced much hardship, due to the decreasing number of patients. Therefore, it is essential to investigate the reasons why patients are avoiding oriental medicine, because the percentage of people consuming medical service is an important marker that assesses the value of medical service. The researcher(s), based on theories on factors that affect health, health behaviors, and diseases, sought to find reasons why oriental medicine clinics saw a decline in the number of patients. Also, by proposing the problems inside the oriental medicine, I came to the following conclusion. -Because Koreans have low expectations for oriental medicine, they do not consider it as full medical service. Also, when they get sick, they are reluctant to seek oriental medicine because of reasons such as the limits of oriental medicine and check-ups, expensive medical cost, negative perception of oriental medicine, not enough support from the media, the old image of the oriental medicine and the little power the industry has on the society. -Among the inner problems of the oriental medicine community was the limitations that the science face on incurable and chronic diseases in terms of treatment and management, little professionalism, lack of scientific evidence, the attitude of the oriental medicine society, lack of sophistication in research methodology, and limitations in responding to changes in public health and the surroundings. The purpose of medicine is to eliminate the possibility of shortened life and dangers by treatment of diseases and health maintenance. For this to happen, structural and developed medical theories and means of treatment are necessary. The researcher hypothesizes that the problems that the oriental medicine society is facing mainly come from the lack of efforts and ability to provide such necessities.

• Nutrition Research and Practice
• /
• 제7권3호
• /
• pp.216-223
• /
• 2013

The purpose of this study is to assess folate intake, and serum and red blood cell (RBC) folate concentrations, and investigate the association between folate status and health-related behaviors among Korean college students. A total of 169 students, aged between 18 and 27 years, participated in this study. Dietary intake data were collected by trained interviewers using a 24-hour recall method for three non-consecutive days in 2009. Information on health-related behaviors was obtained by a self-administered questionnaire. Serum and RBC folate concentrations were measured by microbiological assay. The average intakes of folate were $456{\mu}gDFE$ and $347{\mu}gDFE$ in male and female students, respectively. While the average serum folate concentration was significantly lower in male students (8.9 ng/mL) compared to female students (12.5 ng/mL), RBC concentrations were not significantly different between male (398.6 ng/mL) and female students (405.3 ng/mL). In male students, low serum folate concentrations were associated with total folate intake less than the Estimated Average Requirement, non-use of folic acid supplements, smoking, alcohol drinking at least once a week and low physical activity. In female students, low serum folate concentrations were associated with smoking and alcohol drinking at least two drinks at a time and BMI ${\geq}25$. Alcohol drinking and low physical activity were also associated with low RBC folate concentrations in both male and female students. In order to improve folate nutritional status of college students, the practice of desirable health-related behaviors, such as non-smoking, moderate alcohol drinking, regular physical activity, and maintenance of healthy BMI should be encouraged along with consumption of folate-rich foods and supplements.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.371-374
• /
• 2004

Induction motors are a critical component of many industrial processes and are frequently integrated in commercially available equipment. Safety, reliability, efficiency, and performance are some of the major concerns of induction motor applications. Preventive maintenance of induction motors has been a topic great interest to industry because of their wide range application of industry. Since the use of mechanical sensors, such as vibration probes, strain gauges, and accelerometers is often impractical, the motor current signature analysis (MACA) techniques have gained murk popularity as diagnostic tool. Fault tolerant control (FTC) strives to make the system stable and retain acceptable performance under the system faults. All present FTC method can be classified into two groups. The first group is based on fault detection and diagnostics (FDD). The second group is independent of FDD and includes methods such as integrity control, reliable stabilization and simultaneous stabilization. This paper presents the fundamental FDD-based FTC methods, which are capable of on-line detection and diagnose of the induction motors. Therefore, our group has developed the embedded distributed fault tolerant and fault diagnosis system for industrial motor. This paper presents its architecture. These mechanisms are based on two 32-bit DSPs and each TMS320F2407 DSP module is checking stator current, voltage, temperatures, vibration and speed of the motor. The DSPs share information from each sensor or DSP through DPRAM with hardware implemented semaphore. And it communicates the motor status through field bus (CAN, RS485). From the designed system, we get primitive sensors data for the case of normal condition and two abnormal conditions of 3 phase induction motor control system is implemented. This paper is the first step to drive multi-motors with serial communication which can satisfy the real time operation using CAN protocol.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.868-876
• /
• 2015

실내 공기 중 부유세균은 실내공기오염을 유발하고 재실자의 건강상 위해를 초래할 수 있다. 본 연구는 다중이용시설을 대상으로 주요목적으로 사용되는 실내에서 부유세균의 농도와 세균의 종류를 동정하고 실내공기오염물질 중 부유세균에 대한 기초정보 제공을 목적으로 한다. 노인시설 7개소 (노인요양시설, 노인전문병원, 복지관 포함), 대규모점포 4개소, 대학병원 4개소, 어린이집 7개소 (유치원, 어린이집, 보육원 포함), 지하역사 4개소 및 버스터미널 4개소 등 총 30개소 120개 지점에서 총부유세균의 농도를 측정 분석하고 세균의 종류를 동정하였다. 모든 시설군에서 측정된 실내 부유세균의 농도는 유지기준 $800CFU/m^3$이하 이었으나, I/O비가 1.09-2.36으로 실내의 총부유세균의 농도가 실외에 비해 높았고, 어린이집, 대학병원, 노인시설에서 동정된 세균의 종류별 높은 검출빈도 보였다. 국내 다중이용시설의 주요목적에 따른 실내 부유세균에 대한 지속적 관찰이 필요하며, 특히 어린이집, 대학병원, 노인시설 등에 대한 관심이 요구되고, 추후 배양 가능한 세균 뿐 아니라 알레르겐 등을 포함한 미생물학적 실내오염물질에 대한 추가 연구가 필요할 것으로 사료된다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제22권2호
• /
• pp.33-39
• /
• 1999

This paper included a data analysis of the unit of medical devices using mainternance recording card that had medical devices of unit failure mode, hospital of failure mode and MTBF. The results of the analysis were as follows : 1. Medical devices of unit failure mode was the highest in QC/PM such A hospital as 33.9%, B hospital 30.9%, C hospital 30.3%, second degree was the Electrical and Electronic failure such A hospital as 23.5%, B hospital 25.3%, C hospital 28%, third degree was mechanical failure such A hospital as 19.5%, B hospital 22.5%, C hospital 25.4%. 2. Hospital of failure mode was the highest in Mobile X-ray device(A hospital 62.5%, B hospital 69.5%, C hospital 37.4%), and was the lowest in Sono devices(A hospital 16.76%, B hospital 8.4%, C hospital 7%). 3. Mean time between failures(MTBT) was the highest in SONO devices and was the lowest in Mobile X-ray devices which have 200 - 400 failure hours. 4. Anverage failure ratio was the highest in Mobile X-ray devices(A hospital 31.3%, B hospital 34.8%, C hospital 18.7%), and was the lowest in Sono(Ultrasound) devices (A hospital 8.4%, B hospital 4.2%, C hospital 3.5%). 5. Failure ratio results of medical devices according to QC/PM part of unit failure mode were as follows ; A hospital was the highest part of QC/PM (50%) in Mamo X-ray device and was the lowest part of QC/PM(26.4%) in Castro X-ray. B hospital was the highest part of QC/PM(56%) in Mobile X-ray device, and the lowest part of QC/PM(12%) in Gastro X-ray. C hospital was the highest part of QC/PM(60%) in R/F X-ray device, and the lowest a part of QC/PM(21%) in Universal X-ray. It was found that the units responsible for most failure decreased by systematic management. We made the preventive maintenance schedule focusing on adjustement of operating and dust removal.

• 산업경영시스템학회지
• /
• 제40권1호
• /
• pp.165-172
• /
• 2017

Machines are physically or chemically degenerated by continuous usage. One of the results of this degeneration is the process mean shift. Under the process mean shift, production cost, failure cost and quality loss function cost are increasing continuously. Therefore a periodic preventive resetting the process is necessary. We suppose that the wear level is observable. In this case, process mean shift problem has similar characteristics to the maintenance policy model. In the previous studies, process mean shift problem has been studied in several fields such as 'Tool wear limit', 'Canning Process' and 'Quality Loss Function' separately or partially integrated form. This paper proposes an integrated cost model which involves production cost by the material, failure cost by the nonconforming items, quality loss function cost by the deviation between the quality characteristics from the target value and resetting the process cost. We expand this process mean shift problem a little more by dealing the process variance as a function, not a constant value. We suggested a multiplier function model to the process variance according to the analysis result with practical data. We adopted two-side specification to our model. The initial process mean is generally set somewhat above the lower specification. The objective function is total integrated costs per unit wear and independent variables are wear limit and initial setting process mean. The optimum is derived from numerical analysis because the integral form of the objective function is not possible. A numerical example is presented.

• 한국ITS학회 논문지
• /
• 제6권3호
• /
• pp.174-182
• /
• 2007

현재 국내 ITS는 현장장비 유지관리에 대한 연구 및 고장관련 DB가 부족하여 예비부품수 및 교체시기 산정에 대한 규정이 없는 실정이다. 이에 본 연구는 실제 고장이력자료를 갖고 신뢰성 분석을 실시하여 단거리전용통신(DSRC)방식 노변기지국(RSE)의 예비부품수 및 교체시기를 산정하였다. 전체 수집기간동안의 고장자료는 욕조곡선의 형상을 나타내어 우발고장기간의 자료로 신뢰성 분석을 실시하였으나 고장 수명 분포 중 적합되는 분포가 없었으며, 이러한 사실은 본 연구대상 노변기지국(RSE)의 경우 통계적 모형에 의한 예방 정비가 어려움을 의미한다. 따라서, 본 연구는 실증적인 방법으로 하자보수기간 $1{\sim}2$년 동안의 수리비용 및 고장빈도 이력자료를 활용하여 노변기지국(RSE)의 교체여부를 결정하는 방법 및 필요 예비부품수를 산정하는 방법을 제안하였다. 향후에는 노변기지국(RSE) 외에 다른 ITS 장비에 대한 신뢰성 분석이 필요하다.

• 융합보안논문지
• /
• 제16권6_2호
• /
• pp.99-107
• /
• 2016

이 연구의 목적은 Bluetooth를 활용한 자동차의 내부망 통신네트워크를 해킹공격으로부터 예방하기 위한 대응방안을 제시하기 위함이다. 이를 위해 2장에서는 자동차 통신네트워크의 정의와 내부망 통신네트워크의 종류에 대해서 살펴보았다. 3장에서는 자동차 내부망 통신네트워크 해킹위험성을 분석하기 위해 Bluetooth에 의한 해킹범죄사례를 살펴보았다. 4장에서는 본 연구의 결과로서 첫째, "자동차안전기준에 관한 규칙" 개정이 이루어져야 한다. 동법에서는 전자제어시스템의 정의 및 기준사항과 안전운행을 위한 제작 및 정비를 규정해 놓았음에도 불구하고 전자제어시스템을 대상으로 한 해킹범죄 예방 및 방어와 관련된 보안프로그램 혹은 펌웨어 등의 제작과 관련된 규정이 없는 실정이다. 둘째, 자동차의 전자제어시스템 기술의 복잡성에 기인된 자동차 통신네트워크를 보호하고자 자동차 통신네트워크 보호 법률이 신설되어야 한다.