• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.317-319
• /
• 2008

Photo-alignment layer which contains cinnamate is difficult to generate pretilt angle of liquid crystals. In order to enhance pretilt angle, blending poly (amic acid) between containing fluorine poly (amic acid) and 1,2,3,4-cyclobutanetetracaroxylic dianhydride (CBDA) / 3,5-diaminobenzyl alcohol (DBA) were used. For photoreaction, cinnamate was conjugated by interfacial reaction with blending polyimide.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1577-1578
• /
• 1997

We have studied the effect of the rubbing fabric for liquid crystal alignment and pretilt angle generation in nematic liquid crystals (NLC), 4-cyano-4-n-penthylbiphenyl (5CB), on rubbed polyimide (PI) surfaces. The pretilt angle of 5CB for nylon and rayon fabric is larger than that of cotton fabric in weak rubbing on rubbed PI surfaces. We conclude that the pretilt angle of 5CB is strongly related to the rubbing fabrics on rubbed PI surfaces.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.80-82
• /
• 2007

We have developed a series of fluorinated dimethacrylate copolymers. Our work has covered the synthesized derivatives of alignment materials, characterized the pretilt angle and uniformity of liquid crystal alignment layer. The pretilt angle can be tailored by using the fluorinated copolymer. Excellent uniformity was achieved as shown in experimental results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.6
• /
• pp.477-480
• /
• 1998

In this paper, we investigated the liquid crystal(LC) alignment and generation of pretilt angle by using photo-alignment techniques on two kinds of polyimide(PI) surface, It was found that the uniform alignment for nematic(N) LC is obtained in a cell with slanted UV light irradiation on PI surface without side chain. We successfully observed that the pretilt angle of NLC is generated about $3^{\circ}$ with an incident angle of 70 degree on the PI surface without side chain. It is considered that the pretilt angle generation in NLC is attributed to interaction between the LC molecules and the polymer surfaces.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.7
• /
• pp.595-599
• /
• 2001

The mechanisms of pretilt angle generation for a nematic liquid cystal (NLC) using a photodimerization method with obliquely polarized UV exposure on the various new photo-crosslinkable polymer were studied. A good thermal stability of all the photo-crosslinkable polymers was obtained by thermogravimetric analysis (TGA) measurement until 450$\^{C}$. High pretilt angle of the NLC was observed by polarized UV exposure on the three kinds of the photo-crosslinkable polymers containing biphenyl(BP), decyl(de), and cholesteryl(chol) group, respectively. However, the low pretilt angle of the NLC was measured by obliquely polarized UV exposure on the two kinds of the photo-crosslinkable polymers containing fluorine and chalcone group. Consequently, the high NLC angle generated is attributable to the biphenyl and alkyl moieties, and photo-dimerized chalcone group of the photopolymer.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.6
• /
• pp.297-300
• /
• 2006

The response surface modeling of the pretilt angle control using ion-beam (IB) alignment on nitrogen doped diamond-like carbon (NDLC) thin film layer is investigated. This modeling is used to analyze the variation of the pretilt angle under various process conditions. IB exposure angle and IB exposure time are considered as input factors. The analysis of variance technique is settled to analyze the statistical significance, and effect plots are also investigated to examine the relationships between the process parameters and the response. The model can allow us to reliably predict the pretilt angle with respect to the varying process conditions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.950-953
• /
• 2000

Aligning capabilities of nematic liquid crystal(NLC) using an in-situ photo-alignment method with obliquely polarized UV exposure on a polyimide (PI) surface for homeotropic alignment were studied. The high angle for NLC can be measured by obliquely UV exposure of 30°on the PI surface for 10∼20 min. The pretilt angle of NLC generated using the in-situ photo-alignment was higher than that of a conventional photo-alignment method. Finally, we suggest that the control of pretilt angle in NLC with obliquely polarized UV exposure during imidization of the polymer for homeotropic alignment is promising method to generate high pretilt angle.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.127-129
• /
• 1997

The high pretilt angles in nematic liquid crystals (NLCs) have been generated on robbed polythiophene (PTP) surfaces with alkyl chain lengths. The pretilt angle of the NLC was observed on unidirectionally rubbed PTP surfaces with alkyl chains with more than 9 carbon atoms. We obtained the Pretilt angle of 15~40$^{\circ}$ on rubbed PTP surfaces with 10 carbon atoms in the a1ky1 chain. Also, the pretilt angles of 65~80$^{\circ}$ of NLC were obtained on rubbed PTP surfaces with 11 and 12 carbon atoms in the alkyl chain. We suggest that this high pretilt angle generation in NLC is due to the surface-excluded volume effect by the alkyl chain lengths between. the LCs and the PTP surfaces. Finally, we conclude the odd-even effect on rubbed PTP surfaces is clearly contributed to the pretilt angle generation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.350-353
• /
• 2001

Aligning capabilities for nematic liquid crystal (NLC) using a in-situ photodimerization method on various photo-crosslinkable polyimide (PI) based polymer and blending photopolymer surfaces were stuided. High pretilt angle of the NLC can be measured by obliquely polarized UV exposure on a photo-crosslinkable polyirnide based polymer surface containing biphenyl (BP), decyl (de), and cholesteryl (chol) group, respectively, However, the low pretilt angle of the NLC was measured by obliquely polarized UV exposure on the blending photopolymer (PI and cinnamate materials) surfaces. Consequently, the pretilt angle of the NLC generated on the photo-crosslinkable polyimide based polymer surfaces using the in-situ photodimerization method was higher than that of the blending photopolymers.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.526-529
• /
• 2004

The nematic liquid crysta](NLC) aligning capabilities using a-C:H thin film deposited at the three kinds of rf bias condition were investigated. A high pretilt angle of NLC on low substrate rf bias applied a-C:H thin films was observed and the low pretilt angle of the NLC on high substrate rf bias applied a-C:H thin films was observed. Consequently, the high NLC pretilt angle and the good aligning capabilities of LC alignment by the IB alignment method on the a-C:H thin film deposited at 1 W rf bias condition can be achieved. It is considered that pretilt angle of the NLC may be attributed to substrate rf bias condition and IB energy time. Therefore, LC alignment is affected by topographical structure forming strong IB energy.