• International Journal of Fluid Machinery and Systems
• /
• 제2권4호
• /
• pp.409-417
• /
• 2009

An investigation of surge inception in a centrifugal compressor was done with measurements of steady and unsteady static pressure. Vaneless diffuser and vaned diffuser were tested. Analyses of the static pressure and the pressure fluctuation showed that stall at the impeller leading edge occurred at first, and then it extended to downstream. In case of the vaneless diffuser, deterioration of the pressure rise in the impeller triggered instability. For the vande diffuser, instability that was generated in the impeller propagated into the vaned diffuser, however the pressure recovery by the vaned diffuser made the operation of the compressor stable at low flow rate.

• 한국분무공학회지
• /
• 제25권2호
• /
• pp.45-50
• /
• 2020

Recently, global warming and environmental pollution are becoming more important, and fuel economy is becoming important. Each automobile company is actively developing various new technologies to increase fuel efficiency. CVVD(Continuously Variable Valve Duration) system means a device that continuously changes the rotational speed of the camshaft to change the valve duration according to the state of the engine. In this paper, VVT(Variable Valve Timing) and CVVD were applied to a single-cylinder diesel engine, and the characteristics of intake and exhaust flow rate and in-cylinder pressure characteristics were analyzed by numerical analysis. In order to analyze the effect of CVVD on the actual engine operation, the study was performed by setting the valve control and injection pressure as variables in two sections of the engine operating region. As a result, In the case of applying CVVD, the positive overlap with the exhaust valve is maintained, thus it is possible to secure the flow smoothness of air and increase the volumetric efficiency by improving the flow rate. The section 2 condition showed the highest peak pressure, but the pressure rise rate was similar to that of the VVT 20 and CVCD 20 conditions up to 40 bar due to the occurrence of ignition delay.

• 한국가스학회지
• /
• 제17권2호
• /
• pp.44-49
• /
• 2013

천연가스의 사용량이 날로 증가됨에 따라 고용량의 가스를 운송하기 위해 고압배관의 설치 운영이 불가피하고 이에 따라 고압의 매몰 천연가스배관에서 다양한 원인에 의한 결함 발생 시 대규모 누출로 이어지면 높은 압력의 가스 방출에 따른 대기 중 확산 그리고 점화원에 의한 화재 폭발로 인하여 큰 피해가 발생할 수 있다. 이 연구에서는 고압의 매몰 천연가스배관에서 결함 발생 시 매몰된 배관에서의 가스 누출 거동 분석과 가스 확산 및 지연점화에 따른 플래시 화재의 피해 거리를 예측하여, 사고 영향을 감소할 수 있도록 대피거리의 산정 등에 의한 비상조치계획을 세워 안전관리 활동에 도움이 되고자 한다.

• 에너지공학
• /
• 제24권3호
• /
• pp.61-66
• /
• 2015

Homogeneous charge compression ignition (HCCI) engine combines the combustion characteristics of a compression ignition engine and a spark ignition engine. HCCI engines take advantage of the high compression ratio and heat release rate and thus exhibit high efficiency found in compression ignition engines. In modern research, simulation has be come a powerful tool as it saves time and also economical when compared to experimental study. Engine simulation has been developed to predict the performance of a homogeneous charge compression ignition engine. The effects of compression ratio, cylinder pressure, rate of pressure rise, flame temperature, rate of heat release, and mass fraction burned were simulated. The simulation and analysis show several meaningful results. The objective of the present study is to develop a combustion characteristics model for a homogeneous charge compression ignition engine running with isooctane as a fuel and effect of compression ratio.

• 한국분무공학회지
• /
• 제4권3호
• /
• pp.24-31
• /
• 1999

The engine performance and combustion characteristics of methanol blended fuel of spark ignition engine were discussed on the basics of experimental investigation. The effects of methanol blending fuel on combustion in cylinder were investigated under various conditions of engine cycle and blending fuel on combustion in cylinder were investigated tinder various conditions of engine cycle and blending ratios. The results showed thai the engine performance was influenced by the methanol blending ratio and the variations of operating conditions test engine. The increase of fuel temperature brought on the improvement of combustion characteristics such as cylinder pressure. the rate of pressure rise and heat release in an engine. The burning rate of fuel-air mixture, the exhaust emissions and the other characteristics of performance were discussed also.

• 한국가스학회지
• /
• 제10권3호
• /
• pp.60-64
• /
• 2006

카본블랙 제조공정에서 발생되는 부생가스의 폭발한계와 폭발특성을 연구하였다. 부생 가스의 75% 가량은 수분과 질소였으며 가연성 성분으로는 수소를 비롯한 메탄, 아세틸렌, 일산화탄소 등을 포함하고 있어 연료로 활용하고 있다. 부생 가스중의 가연성 가스 성분들에 의해 공정상에 폭발 및 연소의 위험이 있다. 실험결과 얻어진 폭발한계범위는 17.1%에서 70.7%였으며 르샤틀리에 법칙을 이용하여 예측한 값과는 상당한 차이가 있었다. 또한 폭발특성 실험 결과 폭발압력은 최대 $5.4kg/cm^2$이었고 평균 폭발압력 상승속도는 $39.2kg/cm^2/s$였다. 이러한 결과들은 부생 가스의 취급 및 이용에 따른 폭발이나 화재 사고시 공정과 시설 등에 치명적인 손상을 입힐 수 있으므로 가스폭발 방지 및 방호조치가 필요하다.

• 설비공학논문집
• /
• 제23권12호
• /
• pp.828-835
• /
• 2011

The purpose of this study is to analyze and evaluate the 3 types of indoor ventilation methods such as natural, mechanical, and hybrid ventilation in high-rise building which is affected by stack effect and outdoor air pressure. For the evaluation of the ventilation capacity, CFD simulation was performed in a typical high-rise residential building. The results of the simulations are as follows: 1) Natural ventilation method is not enough to the regulation. 2) In case of mechanical ventilation, congested area is occurred but meets the regulation. 3) In case of hybrid ventilation with stack effect, all the areas of indoor meet the regulation and congested area is reduced. 4) In case of high-rise building, the differences of ventilation rate among houses in the building are not large because the mechanical ventilation is main factor.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.362-367
• /
• 2012

Though a micro pump is a crucial element in miniaturized bio-fluidic systems or drug delivery systems, most of the conventional micro pumps still have some limitations to miniaturize their controller system and to obtain the sufficient back pressure which can rise over the inner pressure of human body or experimental animals. In this paper, to overcome these limitation, a new PZT disc and its controller were designed and fabricated to get the sufficient flowrate and the back pressure with guaranteeing embeddability of the controller into pumping body. The amplitudes of the disc deflections were as large as 40 ${\mu}m$ at 200 V - 100 Hz condition. As results of experiments, the flow rate and the back pressure increase when the frequency increases. The obtainable maximum flow rate and back pressure are 5.2 ml/min at 95 Hz and 13.14 kPa at 90 Hz respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권1호
• /
• pp.15-22
• /
• 2014

엔진 배기 저감이나 열효율 향상을 위하여 배기관에 많은 장치들이 부착되고 있다. 이러한 장치들은 배기구의 개도면적을 줄이게 되고 배기 압력을 증가시킨다. 배기압력의 증가는 원활한 가스 교환을 방해하여 엔진 성능이 저하되는 원인이 된다. 그러나 적당한 배압의 증가는 잔류가스의 효과에 의하여 질소산화물을 감소시킬 수 있다. 본 연구에서는 배기 압력 증가가 엔진 성능에 미치는 영향을 평가하기 위하여 배기관 끝단의 개도량을 변화시켜 배기 압력을 조절하면서 엔진 실험을 수행하였다. 실험 결과 무부하에서 배압이 미소하게 증가된 경우에 연료 소모율이 저감되고 동시에 질소산화물이 저감되었지만 과도하게 배압이 증가하는 경우에는 연소의 악화로 유해 배기가스가 크게 증가되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.304-310
• /
• 2001

This paper describes the analysis of flow field using a projection finite element method. The projection scheme with a pressure correction is presented for the analysis of an incompressible Navier-Stokes flow. The projection scheme is analyzed numerically and applied to the well-known bench marking problems such as lid driven cavity. Finally, the projection scheme is applied to a flow through the automobiles front. In the automobiles cooling system, the flow through its front is very important to a cooling performance. The results show that the flow quantity increases by locating the position of bumper to the further front position of a car. And, the improvement on the suction part below a bumper achieves the more passing flow quantity. The attachment of an air dam increases passing flow quantity causing the pressure rise to the front part and the pressure drop beneath a car.